Commit 10473d04 authored by Gabor Juhos's avatar Gabor Juhos Committed by Daniel Schwierzeck
Browse files

malta: use unmapped flash base address



The physical base address of the NOR flash is 0x1e000000
on the Malta boards. The hardware also maps the first 4MiB
of the flash into the 0x1fc00000-0x1fffffff range.

Currently, U-Boot uses the mapped address to access the
flash, which does not work in recent qemu versions.

Since commit a427338b222b43197c2776cbc996936df0302f51
(mips_malta: correct reading MIPS revision at 0x1fc00010)
writing to the mapped address space causes a CPU exception.
Due to the exception, U-Boot hangs during boot when it tries
to detect the CFI flash chip.

Use the correct physical address for the MALTA_FLASH_BASE
constant to fix the problem. In order to avoid relocation
problems, also update the CONFIG_SYS_{TEXT,MONITOR}_BASE
constants.

The change makes it possible to start U-Boot on a Malta
board emulated with Qemu 1.6.1 and 1.7.0-rc0. It also
works on older versions (tested with 1.1.1, 1.2.2, 1.4.2,
1.5.3).
Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Schwierzeck's avatarDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
parent 63c4f17b
......@@ -44,7 +44,7 @@
#define MALTA_RESET_BASE 0x1f000500
#define GORESET 0x42
#define MALTA_FLASH_BASE 0x1fc00000
#define MALTA_FLASH_BASE 0x1e000000
#define MALTA_REVISION 0x1fc00010
#define MALTA_REVISION_CORID_SHF 10
......
......@@ -40,8 +40,8 @@
/*
* Memory map
*/
#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_TEXT_BASE 0xbe000000 /* Rom version */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
#define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment