Commit 20070909 authored by Camelia Groza's avatar Camelia Groza Committed by Priyanka Jain
Browse files

powerpc: dts: t2080rdb: add FMan v3 nodes



Add the FMan v3 nodes for the T2080RDB. The nodes are copied over with
little modification from the Linux kernel source code.
Signed-off-by: default avatarCamelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain's avatarPriyanka Jain <priyanka.jain@nxp.com>
parent aec12289
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
* T2080RDB Device Tree Source * T2080RDB Device Tree Source
* *
* Copyright 2013 - 2015 Freescale Semiconductor Inc. * Copyright 2013 - 2015 Freescale Semiconductor Inc.
* Copyright 2019 NXP * Copyright 2019-2021 NXP
*/ */
/include/ "t2080.dtsi" /include/ "t2080.dtsi"
...@@ -20,6 +20,71 @@ ...@@ -20,6 +20,71 @@
}; };
}; };
&soc {
fman@400000 {
ethernet@e0000 {
phy-handle = <&xg_aq1202_phy3>;
phy-connection-type = "xgmii";
};
ethernet@e2000 {
phy-handle = <&xg_aq1202_phy4>;
phy-connection-type = "xgmii";
};
ethernet@e4000 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii";
};
ethernet@e6000 {
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii";
};
ethernet@f0000 {
phy-handle = <&xg_cs4315_phy2>;
phy-connection-type = "xgmii";
};
ethernet@f2000 {
phy-handle = <&xg_cs4315_phy1>;
phy-connection-type = "xgmii";
};
mdio@fc000 {
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
};
mdio@fd000 {
xg_cs4315_phy1: ethernet-phy@c {
compatible = "ethernet-phy-id13e5.1002";
reg = <0xc>;
};
xg_cs4315_phy2: ethernet-phy@d {
compatible = "ethernet-phy-id13e5.1002";
reg = <0xd>;
};
xg_aq1202_phy3: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x0>;
};
xg_aq1202_phy4: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x1>;
};
};
};
};
&espi0 { &espi0 {
status = "okay"; status = "okay";
flash@0 { flash@0 {
...@@ -38,3 +103,5 @@ ...@@ -38,3 +103,5 @@
reg = <0x68>; reg = <0x68>;
}; };
}; };
/include/ "t2080si-post.dtsi"
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment