Commit 3012a840 authored by Kever Yang's avatar Kever Yang Committed by Simon Glass
Browse files

rockchip: arm64: rk3399: add SPL support



Add SPL support for rk3399, default with of-platdata enabled.
Signed-off-by: Kever Yang's avatarKever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
Drop Kconfig changes to fix build error:
Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
parent a82426e0
......@@ -11,6 +11,7 @@ else ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o
obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o
else
obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
......
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <debug_uart.h>
#include <dm.h>
#include <fdtdec.h>
#include <led.h>
#include <malloc.h>
#include <ram.h>
#include <spl.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
#include <asm/arch/periph.h>
#include <asm/arch/sdram.h>
#include <asm/arch/timer.h>
#include <dm/pinctrl.h>
#include <dm/root.h>
#include <dm/test.h>
#include <dm/util.h>
#include <power/regulator.h>
DECLARE_GLOBAL_DATA_PTR;
u32 spl_boot_device(void)
{
return BOOT_DEVICE_MMC1;
}
u32 spl_boot_mode(const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
#define TIMER_CHN10_BASE 0xff8680a0
#define TIMER_END_COUNT_L 0x00
#define TIMER_END_COUNT_H 0x04
#define TIMER_INIT_COUNT_L 0x10
#define TIMER_INIT_COUNT_H 0x14
#define TIMER_CONTROL_REG 0x1c
#define TIMER_EN 0x1
#define TIMER_FMODE (0 << 1)
#define TIMER_RMODE (1 << 1)
void secure_timer_init(void)
{
writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_L);
writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_H);
writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_L);
writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_H);
writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
}
#define GRF_EMMCCORE_CON11 0xff77f02c
void board_init_f(ulong dummy)
{
struct udevice *pinctrl;
struct udevice *dev;
int ret;
/* Example code showing how to enable the debug UART on RK3288 */
#include <asm/arch/grf_rk3399.h>
/* Enable early UART2 channel C on the RK3399 */
#define GRF_BASE 0xff770000
struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C3_SEL_MASK,
GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C4_SEL_MASK,
GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
/* Set channel C as UART2 input */
rk_clrsetreg(&grf->soc_con7,
GRF_UART_DBG_SEL_MASK,
GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
#define EARLY_UART
#ifdef EARLY_UART
/*
* Debug UART can be used from here if required:
*
* debug_uart_init();
* printch('a');
* printhex8(0x1234);
* printascii("string");
*/
debug_uart_init();
printascii("U-Boot SPL board init");
#endif
/* Emmc clock generator: disable the clock multipilier */
rk_clrreg(GRF_EMMCCORE_CON11, 0x0ff);
ret = spl_init();
if (ret) {
debug("spl_init() failed: %d\n", ret);
hang();
}
secure_timer_init();
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("Pinctrl init failed: %d\n", ret);
return;
}
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret) {
debug("DRAM init failed: %d\n", ret);
return;
}
}
void spl_board_init(void)
{
struct udevice *pinctrl;
int ret;
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
goto err;
}
/* Enable debug UART */
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
if (ret) {
debug("%s: Failed to set up console UART\n", __func__);
goto err;
}
preloader_console_init();
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
back_to_bootrom();
#endif
return;
err:
printf("spl_board_init: Error %d\n", ret);
/* No way to report error here */
hang();
}
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
/* Just empty function now - can't decide what to choose */
debug("%s: %s\n", __func__, name);
return 0;
}
#endif
......@@ -22,6 +22,12 @@
#define CONFIG_SYS_TEXT_BASE 0x00200000
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff8effff
#define CONFIG_SPL_TEXT_BASE 0xff8c2008
#define CONFIG_SPL_MAX_SIZE 0x30000
/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000
#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment