Commit 54847933 authored by Lukasz Majewski's avatar Lukasz Majewski Committed by Tom Rini
Browse files

kconfig: Convert CONFIG_MXS_GPIO to Kconfig

This converts the following to Kconfig:
   CONFIG_MXS_GPIO

Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/571260789

Signed-off-by: Lukasz Majewski's avatarLukasz Majewski <lukma@denx.de>
Acked-by: Peng Fan's avatarPeng Fan <peng.fan@nxp.com>
Acked-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
parent c399dca8
......@@ -31,6 +31,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:128k(bootstrap),1024k(boot),768k(env),-(root)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
......
......@@ -27,6 +27,7 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_DOS_PARTITION=y
CONFIG_MXS_GPIO=y
# CONFIG_MMC is not set
CONFIG_NAND=y
CONFIG_NAND_MXS=y
......
......@@ -26,6 +26,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MXS_GPIO=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
......
......@@ -28,6 +28,7 @@ CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
# CONFIG_NET is not set
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
CONFIG_USB=y
......
......@@ -38,6 +38,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
......
......@@ -38,6 +38,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
......
......@@ -37,6 +37,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
......
......@@ -36,6 +36,7 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
......
......@@ -30,6 +30,7 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
CONFIG_USB=y
......
......@@ -29,6 +29,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_PHYLIB=y
CONFIG_MII=y
......
......@@ -22,6 +22,7 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
CONFIG_OF_LIBFDT=y
......@@ -29,6 +29,7 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_MXS_GPIO=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
CONFIG_USB=y
......
......@@ -139,6 +139,11 @@ config MXC_GPIO
help
Support GPIO controllers on various i.MX platforms
config MXS_GPIO
bool "Freescale/NXP MXS GPIO driver"
help
Support GPIO controllers on i.MX23 and i.MX28 platforms
config OMAP_GPIO
bool "TI OMAP GPIO driver"
depends on ARCH_OMAP2PLUS
......
......@@ -94,12 +94,6 @@
/*
* Drivers
*/
/* APBH DMA */
/* GPIO */
#define CONFIG_MXS_GPIO
/*
* DUART Serial Driver.
* Conflicts with AUART driver which can be set by board.
......
......@@ -1210,7 +1210,6 @@ CONFIG_MXC_USB_PORTSC
CONFIG_MXS
CONFIG_MXS_AUART
CONFIG_MXS_AUART_BASE
CONFIG_MXS_GPIO
CONFIG_MXS_OCOTP
CONFIG_MX_CYCLIC
CONFIG_MY_OPTION
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment