configs: Re-sync almost all of cmd/Kconfig

This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.
Signed-off-by: Tom Rini <trini@konsulko.com>

arch/arm/include/asm/arch-bcmcygnus/configs.h

@@ -30,7 +30,6 @@
 #define CONFIG_PHY_BROADCOM
 #define CONFIG_PHY_RESET_DELAY 10000 /* PHY reset delay in us*/
 
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
 
 #endif /* __ARCH_CONFIGS_H */

arch/blackfin/include/asm/config.h

@@ -138,9 +138,6 @@
 #ifndef CONFIG_SYS_BOOTM_LEN
 # define CONFIG_SYS_BOOTM_LEN 0x4000000
 #endif
-#ifndef CONFIG_SYS_PROMPT
-# define CONFIG_SYS_PROMPT "bfin> "
-#endif
 #ifndef CONFIG_SYS_CBSIZE
 # define CONFIG_SYS_CBSIZE 1024
 #elif defined(CONFIG_CMD_KGDB) && CONFIG_SYS_CBSIZE < 1024

cmd/Kconfig

@@ -343,7 +343,7 @@ config CMD_FLASH
 	    protect - enable or disable FLASH write protection
 
 config CMD_ARMFLASH
-	depends on FLASH_CFI_DRIVER
+	#depends on FLASH_CFI_DRIVER
 	bool "armflash"
 	help
 	  ARM Ltd reference designs flash partition access

configs/A10-OLinuXino-Lime_defconfig

@@ -12,7 +12,10 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

configs/A10s-OLinuXino-M_defconfig

@@ -13,6 +13,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/A13-OLinuXinoM_defconfig

@@ -17,6 +17,9 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_SUNXI_NO_PMIC=y
 CONFIG_USB_EHCI_HCD=y

configs/A13-OLinuXino_defconfig

@@ -19,7 +19,10 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -12,7 +12,10 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800

configs/A20-OLinuXino-Lime_defconfig

@@ -10,7 +10,10 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800

configs/A20-OLinuXino_MICRO_defconfig

@@ -13,6 +13,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y

configs/A20-Olimex-SOM-EVB_defconfig

@@ -15,7 +15,10 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y

configs/Ainol_AW1_defconfig

@@ -17,5 +17,8 @@ CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_USB_MUSB_HOST=y

configs/Ampe_A76_defconfig

@@ -19,5 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_USB_MUSB_HOST=y

configs/Auxtek-T003_defconfig

@@ -11,6 +11,9 @@ CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/Auxtek-T004_defconfig

@@ -9,6 +9,9 @@ CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/B4420QDS_NAND_defconfig

@@ -8,6 +8,11 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_NETDEVICES=y

configs/B4420QDS_SPIFLASH_defconfig

@@ -7,6 +7,11 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_NETDEVICES=y

configs/B4420QDS_defconfig

@@ -7,6 +7,11 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420"
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_NETDEVICES=y

configs/B4860QDS_NAND_defconfig

@@ -8,6 +8,11 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_NETDEVICES=y

configs/B4860QDS_SECURE_BOOT_defconfig

@@ -8,6 +8,11 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SECURE_BOOT"
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y