Commit d61f3ee9 authored by Stefan Eichenberger's avatar Stefan Eichenberger Committed by Stefan Roese
Browse files

arm: mvebu: a38x: serdes: fix serdes config for USB3

The electrical serdes configuration for USB3 expects an array as data
argument. For USB3 the second value is used (see data_arr_idx = USB3 =
1). However, because only one value is inside the array mv_seq_exec is
accessing an invalid element and the serdes is configured wrongly.

This wrong initialization is leading to an unreliable detection
mechanism for some USB3 devices. We were able to reproduce the issue
regularly with an LTE modem from Sierra Wireless (SM7455) where it was
not detected as USB3 device in 1/3 of all tests.

This commit fixes the issue by setting data_arr_idx to 0. This is the
same value as the original U-Boot from Marvell is using. There it is
called FIRST_CELL which is a define for 0.

commit 56f963ce4c ("fix: serdes: a38x, a39x: Fix USB3 serdes DB
Signed-off-by: default avatarStefan Eichenberger <>
Signed-off-by: default avatarRené Straub <>
Reviewed-by: Stefan Roese's avatarStefan Roese <>
parent 574506c3
......@@ -1204,7 +1204,7 @@ int hws_serdes_seq_db_init(void)
sizeof(usb3_electrical_config_serdes_rev2_params) /
sizeof(struct op_params);
serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = USB3;
serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = 0;
/* USB3_TX_CONFIG_SEQ sequence init */
serdes_seq_db[USB3_TX_CONFIG_SEQ1].op_params_ptr =
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment