- Feb 06, 2023
-
-
This supports reading a kernel and ramdisk from qfw, then loading it with either the booti or bootz commands. For now this uses the existing booti and bootz commands, rather than trying to call that functionality directly (e.g. do_bootm_states()). It does not require the HUSH parser though, which helps a little with size. Signed-off-by:Simon Glass <sjg@chromium.org>
-
Add a bootdev device for qfw so that it can be used with standard boot. This simply checks for the correct method and then does the read. Most of the other logic is handed in a new bootmeth driver. Signed-off-by: -
This is currently in the cmd/ file but we want to call it from a driver. Move it into a common place. Tidy up the header-file order while we are here. Signed-off-by: -
This uses casts all over the place. Use the correct type so that these can be avoided, as is done with other commands. Also simplify a few conditionals. Signed-off-by: -
We need to support a basic set of filesystems for booting to work in most cases. Add these in via a new option, letting the board disable them individually (for space reasons) if desired. This enables the filesystem commands as well as the actual functionality, even though bootstd is quite happy to use ext4 without the ext4 command. Further work would be needed to disintangle this and reduce code size. Add several other options as well, providing sensible defaults. We cannot enable this by default, since it expands the size of many boards quite a lot. Signed-off-by: -
At present virtio tries to attach QEMU services to a bootdev device, which cannot work. Add a check for this. Also use bootdev_setup_sibling_blk() to create the bootdev device, since it allows the correct name to be used and bootdev_get_sibling_blk() to work as expected. The bootdev is not created on sandbox since it does have a real virtio device and it is not possible to read blocks. Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org>
-
In some cases the block device is obtained but is not probed, since it is a sibling of the bootdev. Make sure it is probed, so it can be used without any trouble. This fixes a bug with virtio, where the device is accessed before it has been set up by the virtio uclass. Signed-off-by:
-
It is sometimes useful to have one without the other, e.g. on a device without a display, since at present the expo feature requires CONFIG_VIDEO to be enabled. Update the Makefile and bootflow command to support this, as well as the EXPO dependency. Signed-off-by: -
When QEMU does not respond for some reason, it is helpful to have debugging info to show. Add some. Signed-off-by: -
Sometimes it is useful to log things related to filesystems. Add a new category and place it at the top of one of the FAT files. Signed-off-by: -
am335x_evm_defconfig is used for BeagleBone Black, popular single board computer with wide extension support. Enable CONFIG_CMD_EXTENSION by default since extension detection is already implemented for am335x. Also run make savedefconfig for am335x_evm_defconfig Signed-off-by:Matwey V. Kornilov <matwey.kornilov@gmail.com>
-
Tom Rini authored
This family of platforms typically has a USB port, and so attempting to boot from it, and making it first, will provide a better overall user experience. Signed-off-by:Tom Rini <trini@konsulko.com>
-
allow only to boot signed fitimages (and signed u-boot scripts). Signed-off-by:Heiko Schocher <hs@denx.de>
-
enable protected Environment on socrates board. Signed-off-by: -
add autoboot delay string for socrates board. use sha256 for abort autoboot, use "ao" to abort. Signed-off-by: -
add support for i2c eeprom on address 0x51. Signed-off-by: -
add boot retry feature and reboot after 120 seconds. Signed-off-by: -
drop second flash bank, as not used anymore. Signed-off-by: -
we need to set initrd_high to get fitimage booting. Without, U-Boot drops when booting fitimage: ERROR: Failed to allocate 0x59a0b6 bytes below 0x800000. ramdisk - allocation error bootm - boot application image from memory Signed-off-by: -
setup MTD partitioning through mtdparts variable and set it to: mtdparts=fe0000000.nor:13312k(system1),13312k(system2),5120k(data),128k(env),128k(env-red),768k(u-boot) and pass this to linux per kernel commandline. Signed-off-by: -
include common e500v2_power_isa.dtsi and rearrange some nodes. Signed-off-by: -
convert socrates board to use MPC85XX_HAVE_RESET_VECTOR and disable CONFIG_OF_BOARD and use common u-boot.dtsi for creating u-boot-dtb.bin. Signed-off-by: -
U-Boot build process for socrates board produces final U-Boot binary in file u-boot-socrates.bin (by binman) And as a bonus it produces two unusable broken binaries u-boot-dtb.bin and u-boot.bin (by Makefile). Clean this up, so final U-Boot binary is in u-boot-dtb.bin Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
-
current mainline does not work on socrates board. To get it back up working, there are some updates needed in socrates_defconfig. Signed-off-by:
-
This was added by mistake and renders the function useless. Fix it. Signed-off-by:
Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss@weidmueller.com> Reviewed-by:
Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
-
As MDIO driver does not support Driver Model, the pinctrl settings in the MDIO node will not be applied resulting in PHY not being detected. To workaround this we add the MDIO pinctrl in the CPSW3G node in the -u-boot.dtsi file. Add the missing MDIO and RGMII pinctrl nodes in k3-am642-r5-evm.dts Signed-off-by:
Roger Quadros <rogerq@kernel.org> Reviewed-by:
-
We need to enable i2c0 so u-boot can read from EEPROM. Signed-off-by:
-
Sync AM64 DT files with Linux v6.2-rc4 Signed-off-by:
-
There are no differences for the different 832x targets we have in the header defined with SYS_CONFIG_NAME. So we can join the five headers to a single file. Signed-off-by:Holger Brunck <holger.brunck@hitachienergy.com>
-
Next step to get rid of the header files in icnlude/configs. Move most of the defines to km83xx.c directly. Some remaining defines which should go to Kconfig are moved to km-mpc83xx.h for now. Also remove some unused defines and move one define to powerpc.env as we only need it there. Signed-off-by: -
Set splash screen related env variables. Default splash source is set to mmc where user is expected to keep bmp in compressed format with name ti.gz on first partition of mmc. Splash file will be uncompressed to DDR at address 0x82000000 and splash position is set to middle of screen. Signed-off-by:Nikhil M Jain <n-jain1@ti.com>
-
Use .env file for setting board related environment variables, in place of am62x_evm.h file. Except for BOOTENV settings, as config_distro_boot.env file doesn't exist. Signed-off-by:
-
This test will block compilation of the entire test suite on platforms without USB support. Make the extern "usb_started" conditional on USB host or gadget and define a dummy flag if neither is enabled. Cc: Simon Glass <sjg@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Required as Elf_Sym in tools/prelink-riscv.inc. I assume people have been using an OS-supplied elf.h, but macOS doesn't have that. Taken from https://github.com/torvalds/linux/blob/v6.1/include/uapi/linux/elf.h Signed-off-by:
KaDiWa <kalle.wachsmuth@gmail.com> Reviewed-by:
-
Fix shell error: /bin/sh: line 0: [: too many arguments for the darwin major/minor version check. It seems for os_x_before for some reason DARWIN_MAJOR_VERSION and DARWIN_MINOR_VERSION are empty. To fix this set DARWIN_MAJOR_VERSION and DARWIN_MINOR_VERSION to be evaluated once so the value is retained. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
-
When adding reserved memory areas from the EFI memory map set the NOMAP flag when applicable. When this isn't done adding "no-map" flagged entries from the fdt after receiving the same from the EFI memory map fails due to non-matching flags. Signed-off-by:Sjoerd Simons <sjoerd@collabora.com>
-
Tom Rini authored
The LMB code allows for picking a hard limit on the number of regions it can know of, or to dynamically allocate these regions. The reason for this choice is to allow for the compiler to perform a size optimization in the common case. This optimization however, is very small, ranging from 196 bytes to 15 bytes saved, or in some cases, being larger. Now that we also have more regions covered by LMB (in order to protect various parts of our self at run time), the default of 8 is also much easier to hit and leads to non-obvious error messages (which imply that an area is protected, not that we're out of areas to add to the list). Switch to the dynamic use as the default. Signed-off-by:
-
- Feb 04, 2023
-
-
https://source.denx.de/u-boot/custodians/u-boot-videoTom Rini authored
- restore TI AM335x LCDC driver with DM support - make simple panel independent of backlight - add ofnode panel timing decode functions with test - add TIDSS video driver and AM62x splash screen - add TI logo
-
The default splashfile name saved is ti.gz. User can use these logo files and use it to test splash screen. Signed-off-by: -
Splash screen function needs splash source information to load image and display it, splash_location provides the necessary info, Set default_splash_location to MMC at partition 1:1. Probe DSS for splash screen display. Signed-off-by:
-
