Commit 3c5c4777 authored by Michael Walle's avatar Michael Walle Committed by Priyanka Jain
Browse files

arm: dts: ls1028a: move the PCIe controller nodes into /soc



While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.

While at it fix the indentation.
Signed-off-by: default avatarMichael Walle <michael@walle.cc>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain's avatarPriyanka Jain <priyanka.jain@nxp.com>
parent 659fafc3
......@@ -43,38 +43,6 @@
IRQ_TYPE_LEVEL_LOW)>;
};
pcie1: pcie@3400000 {
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x80000
0x00 0x03480000 0x0 0x40000 /* lut registers */
0x00 0x034c0000 0x0 0x40000 /* pf controls registers */
0x80 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
pcie2: pcie@3500000 {
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
reg = <0x00 0x03500000 0x0 0x80000
0x00 0x03580000 0x0 0x40000 /* lut registers */
0x00 0x035c0000 0x0 0x40000 /* pf controls registers */
0x88 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
pcie@1f0000000 {
compatible = "pci-host-ecam-generic";
/* ECAM bus 0, HW has more space reserved but not populated */
......@@ -484,5 +452,37 @@
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
pcie1: pcie@3400000 {
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x80000
0x00 0x03480000 0x0 0x40000 /* lut registers */
0x00 0x034c0000 0x0 0x40000 /* pf controls registers */
0x80 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
pcie2: pcie@3500000 {
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
reg = <0x00 0x03500000 0x0 0x80000
0x00 0x03580000 0x0 0x40000 /* lut registers */
0x00 0x035c0000 0x0 0x40000 /* pf controls registers */
0x88 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
};
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment