Commit 5b422551 authored by Tom Rini's avatar Tom Rini
Browse files

i2c: Remove unused additional legacy soft i2c bus support



Currently the legacy software i2c support is only used for a single bus.
Remove all of the extra and unused support.  Also update the README to
not reference that, and finish removing some already badly auto-edited
related text.
Signed-off-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
parent 26561452
......@@ -1466,20 +1466,6 @@ The following options need to be configured:
Note: This is deprecated in favour of driver model. Use
CONFIG_DM_I2C instead.
This enable the legacy i2c subsystem, and will allow you to use
i2c commands at the u-boot command line (as long as you set
CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE
for defining speed and slave address
- activate second bus with I2C_SOFT_DECLARATIONS2 define
CONFIG_SYS_I2C_SOFT_SPEED_2 and CONFIG_SYS_I2C_SOFT_SLAVE_2
for defining speed and slave address
- activate third bus with I2C_SOFT_DECLARATIONS3 define
CONFIG_SYS_I2C_SOFT_SPEED_3 and CONFIG_SYS_I2C_SOFT_SLAVE_3
for defining speed and slave address
- activate fourth bus with I2C_SOFT_DECLARATIONS4 define
CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4
for defining speed and slave address
- drivers/i2c/fsl_i2c.c:
- activate i2c driver with CONFIG_SYS_I2C_FSL
define CONFIG_SYS_FSL_I2C_OFFSET for setting the register
......
......@@ -438,80 +438,3 @@ U_BOOT_I2C_ADAP_COMPLETE(soft00, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED, CONFIG_SYS_I2C_SOFT_SLAVE,
0)
#if defined(I2C_SOFT_DECLARATIONS2)
U_BOOT_I2C_ADAP_COMPLETE(soft01, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_2,
CONFIG_SYS_I2C_SOFT_SLAVE_2,
1)
#endif
#if defined(I2C_SOFT_DECLARATIONS3)
U_BOOT_I2C_ADAP_COMPLETE(soft02, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_3,
CONFIG_SYS_I2C_SOFT_SLAVE_3,
2)
#endif
#if defined(I2C_SOFT_DECLARATIONS4)
U_BOOT_I2C_ADAP_COMPLETE(soft03, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_4,
CONFIG_SYS_I2C_SOFT_SLAVE_4,
3)
#endif
#if defined(I2C_SOFT_DECLARATIONS5)
U_BOOT_I2C_ADAP_COMPLETE(soft04, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_5,
CONFIG_SYS_I2C_SOFT_SLAVE_5,
4)
#endif
#if defined(I2C_SOFT_DECLARATIONS6)
U_BOOT_I2C_ADAP_COMPLETE(soft05, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_6,
CONFIG_SYS_I2C_SOFT_SLAVE_6,
5)
#endif
#if defined(I2C_SOFT_DECLARATIONS7)
U_BOOT_I2C_ADAP_COMPLETE(soft06, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_7,
CONFIG_SYS_I2C_SOFT_SLAVE_7,
6)
#endif
#if defined(I2C_SOFT_DECLARATIONS8)
U_BOOT_I2C_ADAP_COMPLETE(soft07, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_8,
CONFIG_SYS_I2C_SOFT_SLAVE_8,
7)
#endif
#if defined(I2C_SOFT_DECLARATIONS9)
U_BOOT_I2C_ADAP_COMPLETE(soft08, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_9,
CONFIG_SYS_I2C_SOFT_SLAVE_9,
8)
#endif
#if defined(I2C_SOFT_DECLARATIONS10)
U_BOOT_I2C_ADAP_COMPLETE(soft09, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_10,
CONFIG_SYS_I2C_SOFT_SLAVE_10,
9)
#endif
#if defined(I2C_SOFT_DECLARATIONS11)
U_BOOT_I2C_ADAP_COMPLETE(soft10, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_11,
CONFIG_SYS_I2C_SOFT_SLAVE_11,
10)
#endif
#if defined(I2C_SOFT_DECLARATIONS12)
U_BOOT_I2C_ADAP_COMPLETE(soft11, soft_i2c_init, soft_i2c_probe,
soft_i2c_read, soft_i2c_write, NULL,
CONFIG_SYS_I2C_SOFT_SPEED_12,
CONFIG_SYS_I2C_SOFT_SLAVE_12,
11)
#endif
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment