Commit ebcd6d77 authored by Michael Walle's avatar Michael Walle Committed by Priyanka Jain
Browse files

arm: dts: ls1028a: move the low-power UART nodes into /soc



While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: default avatarMichael Walle <michael@walle.cc>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain's avatarPriyanka Jain <priyanka.jain@nxp.com>
parent 44800f2b
......@@ -174,66 +174,6 @@
};
};
lpuart0: serial@2260000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2260000 0x0 0x1000>;
interrupts = <0 232 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart1: serial@2270000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2270000 0x0 0x1000>;
interrupts = <0 233 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart2: serial@2280000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2280000 0x0 0x1000>;
interrupts = <0 234 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart3: serial@2290000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2290000 0x0 0x1000>;
interrupts = <0 235 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart4: serial@22a0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x22a0000 0x0 0x1000>;
interrupts = <0 236 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart5: serial@22b0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x22b0000 0x0 0x1000>;
interrupts = <0 237 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
usb1: usb3@3100000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
......@@ -484,5 +424,65 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
lpuart0: serial@2260000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2260000 0x0 0x1000>;
interrupts = <0 232 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart1: serial@2270000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2270000 0x0 0x1000>;
interrupts = <0 233 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart2: serial@2280000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2280000 0x0 0x1000>;
interrupts = <0 234 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart3: serial@2290000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2290000 0x0 0x1000>;
interrupts = <0 235 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart4: serial@22a0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x22a0000 0x0 0x1000>;
interrupts = <0 236 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
lpuart5: serial@22b0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x22b0000 0x0 0x1000>;
interrupts = <0 237 0x4>;
clocks = <&sysclk>;
clock-names = "ipg";
little-endian;
status = "disabled";
};
};
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment