Commit f3f41f6c authored by Michael Walle's avatar Michael Walle Committed by Priyanka Jain
Browse files

arm: dts: ls1028a: move the iRC node and its devices into /soc



While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.

While at it fix the indentation.
Signed-off-by: default avatarMichael Walle <michael@walle.cc>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain's avatarPriyanka Jain <priyanka.jain@nxp.com>
parent 575205c9
......@@ -43,105 +43,6 @@
IRQ_TYPE_LEVEL_LOW)>;
};
pcie@1f0000000 {
compatible = "pci-host-ecam-generic";
/* ECAM bus 0, HW has more space reserved but not populated */
bus-range = <0x0 0x0>;
reg = <0x01 0xf0000000 0x0 0x100000>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
enetc0: pci@0,0 {
reg = <0x000000 0 0 0 0>;
status = "disabled";
};
enetc1: pci@0,1 {
reg = <0x000100 0 0 0 0>;
status = "disabled";
};
enetc2: pci@0,2 {
reg = <0x000200 0 0 0 0>;
status = "disabled";
phy-mode = "internal";
fixed-link {
speed = <2500>;
full-duplex;
};
};
mdio0: pci@0,3 {
#address-cells=<0>;
#size-cells=<1>;
reg = <0x000300 0 0 0 0>;
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
mscc_felix: pci@0,5 {
reg = <0x000500 0 0 0 0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
mscc_felix_port0: port@0 {
reg = <0>;
status = "disabled";
};
mscc_felix_port1: port@1 {
reg = <1>;
status = "disabled";
};
mscc_felix_port2: port@2 {
reg = <2>;
status = "disabled";
};
mscc_felix_port3: port@3 {
reg = <3>;
status = "disabled";
};
mscc_felix_port4: port@4 {
reg = <4>;
phy-mode = "internal";
status = "disabled";
fixed-link {
speed = <2500>;
full-duplex;
};
};
mscc_felix_port5: port@5 {
reg = <5>;
phy-mode = "internal";
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
enetc6: pci@0,6 {
reg = <0x000600 0 0 0 0>;
status = "disabled";
phy-mode = "internal";
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
......@@ -484,5 +385,108 @@
compatible = "arm,sp805-wdt";
reg = <0x0 0xc000000 0x0 0x1000>;
};
pcie@1f0000000 {
compatible = "pci-host-ecam-generic";
/* ECAM bus 0, HW has more space reserved but not populated */
bus-range = <0x0 0x0>;
reg = <0x01 0xf0000000 0x0 0x100000>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
enetc0: pci@0,0 {
reg = <0x000000 0 0 0 0>;
status = "disabled";
};
enetc1: pci@0,1 {
reg = <0x000100 0 0 0 0>;
status = "disabled";
};
enetc2: pci@0,2 {
reg = <0x000200 0 0 0 0>;
status = "disabled";
phy-mode = "internal";
fixed-link {
speed = <2500>;
full-duplex;
};
};
mdio0: pci@0,3 {
#address-cells=<0>;
#size-cells=<1>;
reg = <0x000300 0 0 0 0>;
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
mscc_felix: pci@0,5 {
reg = <0x000500 0 0 0 0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
mscc_felix_port0: port@0 {
reg = <0>;
status = "disabled";
};
mscc_felix_port1: port@1 {
reg = <1>;
status = "disabled";
};
mscc_felix_port2: port@2 {
reg = <2>;
status = "disabled";
};
mscc_felix_port3: port@3 {
reg = <3>;
status = "disabled";
};
mscc_felix_port4: port@4 {
reg = <4>;
phy-mode = "internal";
status = "disabled";
fixed-link {
speed = <2500>;
full-duplex;
};
};
mscc_felix_port5: port@5 {
reg = <5>;
phy-mode = "internal";
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
enetc6: pci@0,6 {
reg = <0x000600 0 0 0 0>;
status = "disabled";
phy-mode = "internal";
};
};
};
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment