- 09 Nov, 2021 40 commits
-
-
Add a helper to iterate over all nodes with a given compatible string. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Simon Glass <sjg@chromium.org> Reviewed-by:
Priyanka Jain <priyanka.jain@nxp.com>
-
Copy the board device tree files from linux v5.14. On top of the v5.14 dtbs the changes of these two patches are included here which are needed for u-boot: https://lore.kernel.org/linux-devicetree/20210831134013.1625527-7-michael@walle.cc/ https://lore.kernel.org/linux-devicetree/20210831134013.1625527-8-michael@walle.cc/ At the time of this writing the patches were accepted and will be included in 5.15. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Now that everything is prepared, copy the fsl-ls1028a.dtsi from the linux kernel v5.14.12. Notable changes: - second watchdog added - the number of chip selects of the SPI controller is now correct and reflects what the hardware offers - the LPUARTs have the correct clock parent - USB controllers are enabled by default, which was already the case before this sync because all board enabled all the USB controller nodes. A linux patch to fix this is pending. - the eSDHC controller changes from big-endian to little-endian, but that property seems to be not used at all. Signed-off-by:
-
Disable the PCIe controllers by default, just like in the linux device tree. But there is one catch, for linux they are enabled in-place by the bootloader. Obviously, this doesn't work for the bootloader. Thus we explicitly enable the controllers in the -u-boot.dtsi files. Signed-off-by:
-
To make the synchronization of the u-boot device tree with the one from linux easier, move the I/O window to the one which is specified in the linux device tree. The actual value shouldn't matter as long as it mapped to the corresponding memory window of the PCIe controller which is a 32GiB window at 80_0000_0000h (first controller) or 88_0000_0000h (second controller). Signed-off-by:
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by:
-
This property is unused in the layerscape PCIe controller driver and not present in the linux device tree. Remove it to be similarly. Signed-off-by:
-
The official bindind of the PCIe controller of the ls1028a has the following compatible string: compatible = "fsl,ls1028a-pcie"; Additionally, the resource names and count are different. Update the driver to support this binding and change the entry in the ls1028a device tree. Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by:
-
The official ls1028a binding of the driver uses the following as compatibles: compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; Change the ls1028a device tree and add this new compatible to the fsl specific xhci driver, otherwise the generic dwc3 driver will be used with the compatibles above. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Signed-off-by:
Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: -
The driver will look for a named resource "ecc-addr", but this isn't the official binding. In fact, the official device tree binding documentation doesn't mention any resource names at all. But it is safe to assume that it's the linux ones we have to use if we want to be compatible with the linux device tree. Thus rename "ecc-addr" to "sata-ecc" and convert all the users in u-boot. While at it, also rename "sata-base" to "ahci" although its not used at all. This change doesn't affect the SATA controller on the ZynqMP. Cc: Michal Simek <monstr@monstr.eu> Signed-off-by:
-
The official ls1028a binding of the driver uses the following as compatibles: compatible = "fsl,ls1028a-lpuart"; Add the missing compatible to the driver and update the device tree. Signed-off-by:
-
The official devicetree bindings specifies spi-num-chipselects as the name. Use it. Signed-off-by:
-
The official ls1028a binding of the driver uses the following as compatibles: compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; Add the missing compatible to the driver and update the device tree. We can use the fallback "fsl,ls1021a-v1.0-dspi", because the endianness is determined by the little-endian property and not by the compatible string itself. Further, we won't need and specific details on the DMA configuration (which is different on the LS1021A). If it's ever needed, we can later add the more specific "fsl,ls1028a-dspi" compatible to the driver. Signed-off-by:
-
According to the linux device tree specification the compatible string is: compatible = "arm,sp805", "arm,primecell"; Fix all users in u-boot. Signed-off-by:
-
Update the labels of the nodes to match the kernel ones. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. While at it fix the indentation. Signed-off-by:
-
While inserting it into the new location, keep it sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. While at it fix the indentation. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
While inserting it into the new location, keep it sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by:
-
Populate the /soc node with the first device node. Signed-off-by:
-
To keep the device tree similar to the linux kernel one, we need to move all CCSR related devices into the /soc node. To keep the patches easy to review, we initially add an empty /soc node and populate it piece by piece. Signed-off-by:
-
Nowadays, both boards boot using the TF-A BL1/BL2 and SPL isn't used at all. The property is not needed, remove it. Signed-off-by:
-
This node is some hodgepodge between the ddr controller node at SoC offset 0x1080000 and some static memory size of 2GiB. Remove this bogus node because it doesn't seem to be used at all. Signed-off-by:
-
There is no "fsl,ls1028a-gpu" compatible string. It is solely for the proprietary driver which will never be open source. Lately, linux gained support for the open source etnaviv driver for the GPU (although there is still support for the DisplayPort PHY missing to get actual graphics output). Thus, instead of supporting some proprietary driver, switch over to the open source one, which also have an official device tree binding. Cc: Andy Tang <andy.tang@nxp.com> Signed-off-by:
-
Adds check for memory clock variable before calculating caslat_actual. Set mclk_ps to slowest DIMM supported if mclk_ps is found zero. Signed-off-by:
Maninder Singh <maninder.singh_1@nxp.com> Reviewed-by:
-
Extended fsl_mc command adding an extra option dump_log Signed-off-by:
Cosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com> Reviewed-by:
-
This has not been supported by toolchains for some time and has been putting out a warning. Drop this. Signed-off-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
-
Remove "num-cs" property from device-tree as it is no longer used by qspi driver anymore. Also, specify status as "disabled" and enable qspi support in respective board dts files. This will also help in aligning node properties with other board properties. Signed-off-by:
Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by:
-
Document the update image and how to use the EFI UpdateCapsule. Signed-off-by:
-
In order to add other Kontron boards to the docs alongside the existing sl28 board, we need to reduce the levels of the sections and change the title. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by:
-
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by:
-
Generate a FIT update image during build. The image will be called "u-boot.update" and can be used to build an EFI UpdateCapsule or during DFU mode. Although, the latter isn't supported because there is no USB OTG driver yet. Signed-off-by:
-
Allow EFI to actually set the time before ExitBootServices(). Signed-off-by:
-
Increase fdt blob size for lx2160 and lx2162 series to fix below errors/warnings during device tree fixup. Unable to update property /soc/spi@2100000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2110000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2120000:status, err=FDT_ERR_NOSPACE WARNING: could not set reg FDT_ERR_NOSPACE. WARNING unable to set iommus: FDT_ERR_NOSPACE Signed-off-by:
Wasim Khan <wasim.khan@nxp.com> Reviewed-by:
-
Remove Double free issue from calc_img_key_hash() and calc_esbchdr_esbc_hash() function. Verified the secure boot changes using lx2162aqds board. Signed-off-by:
Kshitiz Varshney <kshitiz.varshney@nxp.com> Reviewed-by:
-
