CHANGELOG 2.57 MB
Newer Older
Wolfgang Denk's avatar
Wolfgang Denk committed
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
commit 580ca3c2b1d032534195cd0bfd89aa11e8c03bb3
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 21 11:37:31 2010 +0100

    ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration

    A newer CPLD version on the 405EX evaluation board requires a different
    EBC controller setup for the CPLD register access. This patch adds a CPLD
    version detection for Kilauea and code to reconfigure the EBC controller
    (chip select 2) for the old CPLD if no new version is found.

    Additionally the CPLD version is printed upon bootup:

    Board: Kilauea - AMCC PPC405EX Evaluation Board (CPLD rev. 0)

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Wolfgang Denk <wd@denx.de>
    Cc: Zhang Bao Quan <bqzhang@udtech.com.cn>

commit eb20392ca986074c78ee4f241a8f2369777a8df3
Author: Felix Radensky <felix@embedded-sol.com>
Date:	Sat Jan 23 01:35:24 2010 +0200

    ppc4xx: Fix sending type 1 PCI transactions

    The list of 4xx SoCs that should send type 1 PCI transactions
    is not defined correctly. As a result PCI-PCI bridges and devices
    behind them are not identified. The following 4xx variants should
    send type 1 transactions: 440GX, 440GP, 440SP, 440SPE, 460EX and 460GT.

    Signed-off-by: Felix Radensky <felix@embedded-sol.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 57ab8a129dd4121711540e2b976aff882998de51
Author: Felix Radensky <felix@embedded-sol.com>
Date:	Tue Jan 19 21:19:06 2010 +0200

    ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMs

    On platforms where SPD EEPROM and another EEPROM have adjacent
    I2C addresses SPD_EEPROM_ADDRESS should be defined as a single
    element array, otherwise DDR2 setup code would fail with the
    following error:

    ERROR: Unknown DIMM detected in slot 1

    However, fixing SPD_EEPROM_ADDRESS would result in another
    error:

    ERROR: DIMM's DDR1 and DDR2 type can not be mixed.

    This happens because initdram() routine does not explicitly
    initialize dimm_populated array. This patch fixes the problem.

    Signed-off-by: Felix Radensky <felix@embedded-sol.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 17ab3057bde25208af71326c0ff213d05eadb318
Author: Felix Radensky <felix@embedded-sol.com>
Date:	Tue Jan 19 17:37:13 2010 +0200

    ppc4xx: Fix reporting of bootstrap options G and F on 460EX/GT

    Bootstrap options G and F are reported incorrectly (G instead
    of F and vice versa). This patch fixes this.

    Signed-off-by: Felix Radensky <felix@embedded-sol.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit a200a7c04d89853d2a1395b96d8ca5e3dd754551
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Dec 15 23:20:54 2009 +0100

    Update CHANGELOG; prepare Prepare v2009.11

    Signed-off-by: Wolfgang Denk <wd@denx.de>

78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
commit f9476902b789b0481b9df49af88d6ca94fb16fa0
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Dec 15 12:10:47 2009 -0600

    mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation

    The gd->cpu pointer is set to an address located in flash when the
    probecpu() function is called while U-Boot is executing from flash.
    This pointer needs to be updated to point to an address in RAM after
    relocation has occurred otherwise Linux may not be able to boot due to
    "fdt board" crashing if flash has been erased or changed.

    This bug was introduced in commit
    a0e2066f392782730f0398095e583c87812d97f2.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Tested-by: Kumar Gala <galak@kernel.crashing.org>
    Tested on MPC8527DS.
    Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit 3363a34b9eeda9783afcbbed5cdd738926d1f4bf
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Dec 13 17:58:34 2009 -0600

    MVBLUE: Remove CONFIG_CMD_IRQ

    Neither the MVBLUE nor its underlying architecture implement the
    do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined.
    This change fixes the following MVBLUE compiler error:

    -> ./MAKEALL MVBLUE
    Configuring for MVBLUE board...
    common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo'
    make: *** [u-boot] Error 1

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

commit 18e8ad60ee87431c01cc2686985b60cc54f5dd3b
Author: Detlev Zundel <dzu@denx.de>
Date:	Mon Dec 14 17:54:40 2009 +0100

    imx27lite: Reenable MTD support on NOR flash.

    The support for this was silently dropped by a configuration
    split during the merge of the imx27lite board support in commit
    864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common
    handling of FLASH devices via MTD layer).

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit f4cfe42758192d09f8375e384cc000aa70d97029
Author: Stefan Roese <sr@denx.de>
Date:	Wed Dec 9 09:01:43 2009 +0100

    nand: Fix access to last block in NAND devices

    Currently, the last block of NAND devices can't be accessed. This patch
    fixes this issue by correcting the boundary checking (off-by-one error).

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: Scott Wood <scottwood@freescale.com>
    Cc: Wolfgang Denk <wd@denx.de>

commit 3b887ca8ce72cc12129183538f6e828db13f4867
Author: Peter Korsgaard <jacmet@sunsite.dk>
Date:	Tue Dec 8 22:20:34 2009 +0100

    mpc83xx: boot time regression, move LCRR setup back to cpu_init_f

    Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR,
    and LCRR bitfields) moved the LCRR assignment to after relocation
    to RAM because of the potential problem with changing the local bus
    clock while executing from flash.

    This change unfortunately adversely affects the boot time, as running
    all code up to cpu_init_r can cause significant slowdown.

    E.G. on a 8347 board a bootup time increase of ~600ms has been observed:

       0.020 CPU:   e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
       0.168 RS:    232
       0.172 I2C:   ready
       0.176 DRAM:  64 MB
       1.236 FLASH: 32 MB

    Versus:

       0.016 CPU:   e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
       0.092 RS:    232
       0.092 I2C:   ready
       0.096 DRAM:  64 MB
       0.644 FLASH: 32 MB

    So far no boards have needed the late LCRR setup, so simply revert it
    for now - If it is needed at a later time, those boards can either do
    their own final LCRR setup in board code (E.G. in board_early_init_r),
    or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do
    the setup in cpu_init_r.

    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 386118a896554b13f14ad0f82356276988f7de82
Author: Michal Simek <monstr@monstr.eu>
Date:	Tue Dec 8 09:12:49 2009 +0100

    microblaze: Correct ffs regression for Microblaze

    We are using generic implementation of ffs. This should
    be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00

    Here is warning message which this patch removes.

    In file included from /tmp/u-boot-microblaze/include/common.h:38,
		     from cmd_mtdparts.c:87:
    /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined
    In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110,
		     from /tmp/u-boot-microblaze/include/common.h:38,
		     from cmd_mtdparts.c:87:
    /tmp/u-boot-microblaze/include/asm/bitops.h:269:1:
    warning: this is the location of the previous definition

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 8fe7b29f9811322931f0192a56431edcf819d6b9
Author: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Date:	Mon Dec 7 08:09:57 2009 -0800

    microblaze: Stop stack clobbering in microblaze-generic.

    A typo caused the stack and malloc regions to overlap, which prevented
    mem_malloc_init() from returning. This commit makes the memory layout match
    the example described in include/configs/microblaze-generic.h

    Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 0fc52948bda0734431cb528ee4fd82f1dec8c7b5
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Dec 7 23:14:13 2009 +0100

    Update CHANGELOG, prepare -rc2

    Signed-off-by: Wolfgang Denk <wd@denx.de>

Wolfgang Denk's avatar
Wolfgang Denk committed
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
commit f2352877cb2daac88115192fb09991a2397d0b27
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Dec 6 23:58:28 2009 -0600

    MAKEALL: Fix return value

    Previously MAKEALL would always return a value of 0, even if 1 or more
    boards did not compile.  This change causes MAKEALL to return 0 if all
    boards were able to build, otherwise 1.

    This change also requires changing the script interpreter from sh to
    bash to support bash's PIPESTATUS variable.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit fbc1c8f6f6c972524197829c56dd8f2f5da0200a
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Dec 6 01:33:24 2009 -0600

    tools/mkimage: Remove duplicate line of code

    Recent commits 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e and
    6a590c5f5fd12cdd27f3153522acfac3854590e7 both fixed the same bug in the
    same manner.  Unfortunately git was "smart" enough to merge both changes
    which resulted in some duplicate code.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

    Reordered code and comment a bit.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit df002fa6b9cd475909ede35bf95b803c2289c6a4
Author: Heiko Schocher <hs@denx.de>
Date:	Sat Dec 5 11:59:51 2009 +0100

    i2c: fix dangling comment in do_i2c_mw()

    commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b deleted some unused
    code in do_i2c_mw(), but missed to also remove the respective
    commment. This patch fixes this.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit f8450829f921cf10667af98a8d08edfa3d998f04
Author: Heiko Schocher <hs@denx.de>
Date:	Tue Dec 1 19:30:47 2009 +0100

    52xx, manroland: add fdt_fixup_memory() in ft_board_setup()

    To update the real memory size in the memory node on the
    uc101 and mucmc52 boards call fdt_fixup_memory() in
    ft_board_setup().

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 0ec81db20294efdad2454a753e79f1fe244a43ca
Author: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
Date:	Tue Dec 1 14:05:55 2009 +0100

    Fix computation in nand_util.c:get_len_incl_bad

    Depending on offset, flash size and the number of bad blocks,
    get_len_incl_bad may return a too small value which may lead to:

    1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the
    bad block aware read/write code. This may hurt performance, but does
    not have any adverse effects.

    2) If there are bad blocks, the nand_{read,write}_skip_bad may choose
    the bad block unaware read/write code (if len_incl_bad == *length)
    which leads to corrupted data.

    Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch>

commit aabb8cb0818e285aeed0cfaf243635997e07554d
Author: Evan Samanas <esamanas@xes-inc.com>
Date:	Mon Nov 9 20:08:36 2009 -0600

    nfs: NfsTimeout() updates

    - NfsTimeout() does not correctly update the NFS timeout value which
      results in NfsTimeout() only being called once in certain situations.
      This can result in the 'nfs' command hanging indefinetly.  For
      example, the command:

	nfs 192.168.0.1:/home/user/file

      will not exit until ctrl-c is pressed if 192.168.0.1 does not have an
      NFS server running.

      This issue is resolved by reinitializting the NFS timeout value inside
      NfsTimeout() when a timeout occurs.

    - Make the 'nfs' command print the 'T' character when a timeout occurs.
      Previously there was no indication that timeouts were occuring.

    - Mimic the 'tftpboot' command and when a download fails print "Retry
      count exceeded; starting again", and restart the download taking the
      'netretry' environment variable into account.

    Signed-off-by: Evan Samanas <esamanas@xes-inc.com>
    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

    Tested on TQM8xxL.

    Tested by: Wolfgang Denk <wd@denx.de>

    Tested on MPC8527DS.

    Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit 224c90d1060bf1a83cbf33ca51d060b9d19e0294
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Nov 18 19:08:59 2009 -0600

    bootm: Fix help message's sub-command ordering

    The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
    sub-commands in the wrong order which resulted in the error below when
    following the 'help' command's instructions:

      "Trying to execute a command out of order"

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a93c92cddaedd5f0720e0da15c6664f7a688b582
Author: Robert P. J. Day <rpjday@crashcourse.ca>
Date:	Tue Nov 17 07:30:23 2009 -0500

    help: Correct syntax of nandecc help output.

    "nandecc" help output should not reproduce the command name, nor have
    a trailing newline.

    Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

commit c2fff331a32ceca837d76eb7827d6340da270d52
Author: Mike Rapoport <mike@compulab.co.il>
Date:	Wed Nov 11 10:03:03 2009 +0200

    smc911x: update SMC911X related configuration description

    Since commit 736fead8fdbf8a8407048bebc373cd551d01ec98 "Convert SMC911X
    Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options
    are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update
    README to reflect that change.

    Signed-off-by: Mike Rapoport <mike@compulab.co.il>

commit 45b6b65c6bf06a589ef3123192af94b0381db27b
Author: Mike Rapoport <mike@compulab.co.il>
Date:	Wed Nov 11 10:03:09 2009 +0200

    smc911x: fix typo in smc911x_handle_mac_address name

    Signed-off-by: Mike Rapoport <mike@compulab.co.il>

commit f64ef9bb995687e24e0b61b52316f4eaa97c3bbc
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Thu Nov 19 02:47:28 2009 -0600

    fix nfs symlink name corruption

    An off by one error may cause nfs readlink lookup fail if
    nfs_path_buff has non-zero data from a previous use.

    Loading: *** ERROR: File lookup fail

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit e8fac25e83426fdf461c66aa8a2530ec28ec536e
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Dec 7 21:06:40 2009 +0100

    at91sam9261ek.c: fix minor coding style issue.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4713010adf5beda87410d637ebfc58db0db9a9db
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Dec 6 01:21:28 2009 +0100

    trab: fix warning: implicit declaration of function 'disable_vfd'

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a9f99ab44b473fb394169ba365f8b4380f981584
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Dec 6 00:53:18 2009 +0100

    zlib.c: avoid build conflicts for cradle board

    Commit dce3d79710 updated the zlib code to v0.95; this caused
    conflicts when building for the "cradle" board, because the (pretty
    generic) preprocessor variable "OFF" was used in multiple files.
    Make sure to avoid further conflicts by #undef'ing it in zlib.c
    before redefining it.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    cc: Giuseppe Condorelli <giuseppe.condorelli@st.com>
    cc: Angelo Castello <angelo.castello@st.com>
    cc: Alessandro Rubini <rubini-list@gnudd.com>

commit 8cbf4e4f17121d732e78764f0ba317c9a1838ea6
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Dec 6 00:26:19 2009 +0100

    Fix out-of-tree building of "apollon" board.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f68ab43de67f59925542efb6bcec30f4a84fe695
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Fri Dec 4 05:35:15 2009 -0500

    lzma: ignore unset filesizes

    The Linux kernel build system changed how it compresses things with LZMA
    such that the header no longer contains the filesize (it is instead set to
    all F's).  So if we get a LZMA image that has -1 for the 64bit field,
    let's just assume that the decompressed size is unknown and continue on.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit cccfc2ab77877dbdd2abe26b28d4c1f467feb0c0
Author: Detlev Zundel <dzu@denx.de>
Date:	Tue Dec 1 17:16:19 2009 +0100

    README: Rearrange paragraphs to regain linear arrangement.

    Two later additions to the Configuration Option section unfortunately
    split the description of Show boot progress and the list of its call outs.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit c81296c16fd9d12422c9968cc0f1d9bf440a7d88
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Nov 24 16:42:10 2009 -0600

    tools/mkimage: Print FIT image contents after creation

    Previously, there was no indication to the user that a FIT image was
    successfully created after executing mkimage.  For example:

      $ mkimage -f uImage.its uImage.itb
      DTC: dts->dtb  on file "uImage.its"

    Adding some additional output after creating a FIT image lets the user
    know exactly what is contained in their image, eg:

      $ mkimage -f uImage.its uImage.itb
      DTC: dts->dtb  on file "uImage.its"
      FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty
      Created:	       Tue Nov 24 15:43:01 2009
       Image 0 (kernel@1)
	Description:  Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty
	Type:	      Kernel Image
	Compression:  gzip compressed
	Data Size:    2707311 Bytes = 2643.86 kB = 2.58 MB
	Architecture: PowerPC
	OS:	      Linux
	Load Address: 0x00000000
	Entry Point:  0x00000000
	Hash algo:    crc32
	Hash value:   efe0798b
	Hash algo:    sha1
	Hash value:   ecafba8c95684f2c8fec67e33c41ec88df1534d7
       Image 1 (fdt@1)
	Description:  Flattened Device Tree blob
	Type:	      Flat Device Tree
	Compression:  uncompressed
	Data Size:    12288 Bytes = 12.00 kB = 0.01 MB
	Architecture: PowerPC
	Hash algo:    crc32
	Hash value:   a5cab676
	Hash algo:    sha1
	Hash value:   168722b13e305283cfd6603dfe8248cc329adea6
       Default Configuration: 'config@1'
       Configuration 0 (config@1)
	Description:  Default Linux kernel
	Kernel:       kernel@1
	FDT:	      fdt@1

    This brings the behavior of creating a FIT image in line with creating a
    standard uImage, which also prints out the uImage contents after
    creation.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 8e1c89663cc8796b85588910046e03b388a7597c
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Nov 24 16:42:09 2009 -0600

    tools/fit_image.c: Remove unused fit_set_header()

    The FIT fit_set_header() function was copied from the standard uImage's
    image_set_header() function during mkimage reorganization.	However, the
    fit_set_header() function is not used since FIT images use a standard
    device tree blob header.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Nov 24 16:42:08 2009 -0600

    tools/mkimage: Assume FDT image type for FIT images

    When building a Flattened Image Tree (FIT) the image type needs to be
    "flat_dt".	Commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5 introduced a
    regression which caused the user to need to specify the "-T flat_dt"
    parameter on the command line when building a FIT image.  The "-T
    flat_dt" parameter should not be needed and is at odds with the current
    FIT image documentation.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 270737acca21f3939f814de5dcf350a1c3d80d83
Author: Michael Brandt <Michael.Brandt@emsyso.de>
Date:	Sun Nov 22 14:13:27 2009 +0100

    EXT2FS: fix inode size for ext2fs rev#0

    extfs.c assumes that there is always a valid inode_size field in the
    superblock. But this is not true for ext2fs rev 0. Such ext2fs images
    are for instance generated by genext2fs. Symptoms on ARM machines are
    messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will
    print nothing.
    This fix checks for rev 0 and uses then 128 bytes as inode size.

    Signed-off-by: Michael Brandt <Michael.Brandt@emsyso.de>
    Tested on: TQM5200S
    Tested-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit bcb324d68f7955c1136dafc944eb55db8ebaa601
Author: Robert P. J. Day <rpjday@crashcourse.ca>
Date:	Thu Nov 19 11:00:28 2009 -0500

    Remove superfluous preprocessor tests from some cmd_*.c files.

    A small number of common/cmd_*.c files contain preprocessor tests that
    are apparently superfluous since those same tests are used in the
    Makefile to control the compilation of those files.  Those tests are
    clearly redundant as long as they surround the entirety of the source
    in those files.

    Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

commit ad53226156fa64b6d04c0d1d6e91e09979cbea15
Author: Robert P. J. Day <rpjday@crashcourse.ca>
Date:	Tue Nov 17 01:59:29 2009 -0500

    README: Update the list of directories.

    Bring the directory listing more into line with current content.

    Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b
Author: Pratap Chandu <pratap.rrke@gmail.com>
Date:	Thu Nov 12 19:28:25 2009 +0530

    Removes dead code in the file common/cmd_i2c.c

    There is some dead code enclosed by #if 0 .... #endif in the file
    common/cmd_i2c.c
    This patch removes the dead code.

    Signed-off-by: Pratap Chandu <pratap.rrke@gmail.com>

commit 64a480601a5614b441de692ae15a62c51e0bb381
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 11 17:51:56 2009 -0500

    smc91111_eeprom: drop CONFIG stub protection

    Since the Makefile now controls the compilation of this, there is no need
    for CONFIG checking nor the stub function.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit f3a7bddc06c927c36a1a99a97131299479ef207a
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Wed Nov 11 19:56:58 2009 +0100

    RTC: Fix return code in MC13783 RTC driver.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit d52e3e0176a74c30549251e16c5c00a363c544d2
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:	Wed Nov 11 19:56:36 2009 +0100

    cmd_date: Fix spelling in error message.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit c253122395753abb9e531d8906c5265dc8803fb1
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Nov 11 10:36:28 2009 -0600

    Move do_irqinfo() to common/cmd_irq.c

    cmd_irq.c is a much better home and it is already conditionally
    compiled based on CONFIG_CMD_IRQ.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a5dd4dc64fe68e549c5ffcf6a048281b5ba94752
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Wed Nov 11 10:36:19 2009 -0600

    cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSE

    cmd_license is already conditionally compiled at the Makefile-level.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 06015146a15adc7455440c491d543f6a8091551d
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Nov 9 15:18:52 2009 -0600

    m41t11: Remove unused functions

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 9ef78511cda39987e5fc10febf386fd19f58ecf7
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Mon Nov 9 15:17:50 2009 -0600

    circbuf: Move to lib_generic and conditionally compile

    circbuf could be used as a generic library and is only currently
    needed when CONFIG_USB_TTY is defined.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 604f7ce55ad74694ef8743ad2e99933dc0265e46
Author: Sanjeev Premi <premi@ti.com>
Date:	Mon Nov 9 22:43:00 2009 +0530

    Fix build failure in examples/standalone

    Some versions of 'make' do not handle trailing white-spaces
    properly. Trailing spaces in ELF causes a 'fake' source to
    be added to the variable COBJS; leading to build failure
    (listed below). The problem was found with GNU Make 3.80.

    Using text-function 'strip' as a workaround for the problem.

    make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone'
    arm-none-linux-gnueabi-gcc -g  -Os	 -fno-common -ffixed-r8 -msoft-float
    -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include
    -fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1-
    203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe  -DCONFIG_
    ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-interwork -march=armv5
    -Wall -Wstrict-prototypes -fno-stack-protector -g  -Os   -fno-common -ff
    ixed-r8 -msoft-float   -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje
    ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co
    desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ
    e -pipe  -DCONFIG_ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-inte
    rwork -march=armv5 -I.. -Bstatic -T u-boot.lds  -Ttext 0x80e80000 -o .c
    arm-none-linux-gnueabi-gcc: no input files
    make[1]: *** [.c] Error 1
    make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone'
    make: *** [examples/standalone] Error 2
    premi #

    Signed-off-by: Sanjeev Premi <premi@ti.com>

    Fixed typo (s/ElF/ELF/).
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit af860962b544ddf323c4ff68454f00d31e44df0a
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Wed Nov 4 18:30:08 2009 -0600

    85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config files

    A bunch of the 85xx boards have this cruft in them - it's not used
    anywhere.  Delete it.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit deec1fbd4f704dded2e668bb9e368631981ea139
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Dec 2 22:26:30 2009 +0100

    MAINTAINERS: update responsible for MPC85xx/86xx

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Kumar Gala <galak@kernel.crashing.org>
    Cc: Becky Bruce <beckyb@kernel.crashing.org>

commit 824d82997fbcf28e49081d36fdd5d3be1b92b03d
Author: Ira W. Snyder <iws@ovro.caltech.edu>
Date:	Wed Nov 4 13:37:59 2009 -0800

    Fix example FIT image source files

    The example FIT image source files do not compile with the latest dtc and
    mkimage. The following error message is produced:

    DTC: dts->dtb  on file "kernel.its"
    Error: kernel.its 7:0 - 1:0 syntax error
    FATAL ERROR: Unable to parse input tree
    ./mkimage: Can't read kernel.itb.tmp: Invalid argument

    The FIT image source files are missing the "/dts-v1/;" directive at the
    beginning of the file. Add the directive to the examples.

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>

commit fd66066ee3ce15c2966feb9b2be0f0d51a95db48
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 4 16:13:19 2009 -0500

    img2srec: use standard types

    The img2srec code creates a lot of typedefs with common names.  These
    easily clash with system headers that include these typedefs (like mingw).

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8204e068110e8abe5db9c3b7df9971b58cda8f26
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Nov 4 16:03:25 2009 -0500

    tools: gitignore *.exe binaries

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 425d3b666eee5c58fdb82fb894a535dd71782a05
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Tue Nov 3 23:31:07 2009 -0600

    ppc: Move conditional compilation of kgdb.c to Makefile

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit e06ab6546b332acc55ac4e7c31338662328b0fb3
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Nov 3 11:36:39 2009 -0500

    spi_flash.h: pull in linux/types.h for u## types

commit 0008555f4d57c15ad86ee735861ca0d783042f61
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Tue Nov 3 11:36:26 2009 -0500

    bootm: mark local boot_os[] table static

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit a8fa379d47f06c7d3ed75c8fb26ae43ee38e1fd7
Author: Nishanth Menon <nm@ti.com>
Date:	Mon Nov 2 09:40:18 2009 -0600

    mkconfig: deny messed up ARCH definition

    Refuse to setup a platform if the command line ARCH= is not the same
    as the one required for the board. This prevents any user with
    prehistoric aliases from messing up their builds.

    Reported in thread:
    http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html

    Inputs from: Mike Frysinger and Wolfgang Denk:
    http://lists.denx.de/pipermail/u-boot/2009-November/063642.html

    Cc: Wolfgang Denk <wd@denx.de>
    Cc: Mike Frysinger <vapier@gentoo.org>
    Cc: Anand Gadiyar <gadiyar@ti.com>
    Cc: Dirk Behme <dirk.behme@googlemail.com>
    Signed-off-by: Nishanth Menon <nm@ti.com>

commit 67b96e87da1b84660fa1e5b78cc760246d116814
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Oct 28 22:13:39 2009 +0100

    Repair the 'netretry=once' option.

    'netretry = once' does the same as 'netretry = yes', because it is not stored
    when it was tried once.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit b25e38fc36e13fa8037fa4d37fe909d1d6e6f372
Author: Remy Bohmer <linux@bohmer.net>
Date:	Thu Oct 29 14:24:22 2009 +0100

    Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=y

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 01826abc02ce160501534788e63629ccbe31b05c
Author: Grazvydas Ignotas <notasas@gmail.com>
Date:	Thu Nov 12 11:46:07 2009 +0200

    OMAP3: pandora: fix booting without serial attached

    When the board is booted without serial cable attached (which
    is how most of them will be used) UART RX is left floating and
    sometimes picks noise, which interrupts countdown and enters
    U-Boot prompt instead of booting the kernel.

    Fix this by setting up internal pullup on UART RX pin. This
    does not prevent serial from working as the internal pullup
    is weak.

    Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>

commit 41dfd8a60324243dbe2dc313a607910824a68aa7
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Oct 28 22:13:37 2009 +0100

    Add support for CS2 dataflash for Atmel-SPI.

    The only missing chipselect line support is CS2, and I need it on
    CS2...

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit faf36c1437c95e4a86835633d9801c5f6396a3c7
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Oct 28 22:13:36 2009 +0100

    Fix mingw tools build

    mkimage does not build due to missing strtok_r() and getline() implementation

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 6a590c5f5fd12cdd27f3153522acfac3854590e7
Author: Remy Bohmer <linux@bohmer.net>
Date:	Wed Oct 28 22:13:35 2009 +0100

    Building of FIT images does not work.

    The type is not set for generation of the FIT images, resulting
    in no images being created without printing or returning an error

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 0a7691e820e33b23f61c6ea0ef6fa72099d1a6ae
Author: Renato Andreola <renato.andreola@imagos.it>
Date:	Mon Nov 23 16:45:14 2009 -0500

    Nios2: do_boom_linux(): kernel gunzip input data integrity problem due to
	missing cache flush.

	Added instruction and data caches flush.

    Signed-off-by: Scott McNutt <smcnutt@psyent.com>

commit de03825386eaedb5e17261dd87cde86e9a764ba9
Author: Scott McNutt <smcnutt@psyent.com>
Date:	Mon Nov 23 16:29:40 2009 -0500

    Nios2: Fix compiler warnings in lib_nios2/board.c (unused variables)

    Signed-off-by: Scott McNutt <smcnutt@psyent.com>

commit 57baa379cf2f67df89a5c6052767fd25daff20bd
Author: Scott McNutt <smcnutt@psyent.com>
Date:	Mon Nov 23 15:54:25 2009 -0500

    Nios2/Nios: Remove unnecessary (residual) linker Nios command scripts from
	the standalone examples.

    Signed-off-by: Scott McNutt <smcnutt@psyent.com>

commit fcffb680e77fcb48598d4a9944dbe2d4503170e0
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Wed Oct 14 19:28:03 2009 -0400

    sf: fix stmicro offset setup while erasing

    Reported-by: Peter Gombos <gombos@protecta.hu>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit d394a7795027d96ca55799df40bd5c4a13dbeebe
Author: Jason McMullan <mcmullan@netapp.com>
Date:	Fri Oct 9 17:12:23 2009 -0400

    sf: new driver for Winbond W25X16/32/64 devices

    Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit cada315100c88894b85972a91309a6f2413966b6
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:	Thu Oct 1 23:55:17 2009 +0200

    mpc8260: move FDT memory node fixup into common CPU code.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
    Tested-by: Heiko Schocher <hs@denx.de>

commit f2cea405f83da46b72098ea874fb3eefe185d312
Author: Po-Yu Chuang <ratbert.chuang@gmail.com>
Date:	Wed Sep 23 15:52:35 2009 +0800

    Add driver for FTRTC010 real time clock

    Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>

    Edited commit message.
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c0356a88011330646e960dfac8a2c909bede3304
Author: Mark Jackson <mpfj-list@mimc.co.uk>
Date:	Mon Aug 17 16:42:52 2009 +0100

    MIMC200: set default fbmem value

    This patch adds a default bootargs "fbmem" value to the
    CONFIG_BOOTARGS string for the MIMC200 board.

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

commit 3ffc0d61bad7d986e344ce7062b37c5c8f04fb0e
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Oct 27 19:58:09 2009 +0100

    ppc4xx: Initialize magnetic coupler on VOM405 boards

    This patch fixes an ugly behavior of the IL712 magnetic coupler
    as used on VOM405. These parts will remember their last state
    over a power cycle which might cause unwanted behavior.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit be0db3e3141c6c6b4e232b51091f35a284cc54e5
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:	Mon Oct 26 09:58:45 2009 +0100

    ppc4xx: Initialize magnetic couplers in PLU405

    This patch fixes an ugly behavior of the IL712 magnetic couplers
    as used on PLU405. These parts will remember their last state
    over a power cycle which might cause unwanted behavior.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 067f54c66acd469870ef6946e1591bfcc02de1b3
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:	Mon Oct 26 09:55:40 2009 +0100

    Add minimal SJA1000 header for basic CAN mode

    This patch is in preparation for the upcoming PLU405 board fix.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit cdbdbe65f5f006cba208accee5a126c659d4b867
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Fri Nov 13 08:52:21 2009 -0600

    ppc/85xx: Fix how we determine the number of CAM entries

    We were incorrectly use the max CAM size as the number of entries in
    the array for setting up the addrmap.  We should be using the NENTRY
    field which is the low 12-bits of TLB1CFG.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fbd47b6753b08162436d9ccad1e63c8d43ede54c
Author: Mike Rapoport <mike@compulab.co.il>
Date:	Thu Nov 12 15:35:08 2009 +0200

    smc911x: make smc911x_initialize return correct value

    Make smc911x_initialize return -1 on error and number of interfaces
    detected otherwise.

    Signed-off-by: Mike Rapoport <mike@compulab.co.il>
    Acked-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit c44efcf97b335dcef7d014f65b7d3094e79adb13
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Thu Nov 12 22:26:02 2009 -0500

    smc911x_eeprom: fix building after smc911x overhaul

    When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was
    missed.  The config option needed updating as well as overhauling of the
    rergister read/write functions.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Tested-by: Mike Rapoport <mike.rapoport@gmail.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3ad95deb30ac73bd57e966d321215a17d3236f9f
Author: Dave Liu <daveliu@freescale.com>
Date:	Thu Nov 12 07:26:37 2009 +0800

    fsl-ddr: Fix the chip-select interleaving issue

    commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
    introduced one new bug to chip-select interleaving.

    Single DDR controller also can do the chip-select
    interleaving if there is dual-rank or qual-rank DIMMs.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 651ef90fa6ca824c8e581aeef9e04bbbe7f7e9ce
Author: javier Martin <javier.martin@vista-silicon.com>
Date:	Thu Oct 29 08:22:43 2009 +0100

    mxc_fec: avoid free() calls to already freed pointers.

    Sometimes, inside NetLoop, eth_halt() is called before eth_init() has
    been called. This is harmless except for free() calls to pointers
    which have not been allocated yet.

    This patch initializes those pointers to NULL and allocates them only
    the first time. This way we can get rid of free calls in halt callback.

    This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.

    Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit e8f1546a88b4ade6a910c4a7958a774ee1b40023
Author: javier Martin <javier.martin@vista-silicon.com>
Date:	Thu Oct 29 08:18:34 2009 +0100

    mxc_fec: fix some erroneous PHY accesses.

    This patch fixes erroneous access to the ethernet PHY which broke the driver.
    1. Selector field in the auto-negotiation register must be 0x00001 for
    using 802.3, not 0x00000 which is reseved.
    2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not
    0x0 fixed address.

    This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.

    Now using proper defines for auto-negotiation register.

    Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit f865fcbbb35851e75fee9c3a3fa8e0f71d9e6463
Author: Ron Lee <ron@debian.org>
Date:	Wed Aug 5 20:14:01 2009 +0200

    ARM Don't inline weak symbols

    ------------------------------------------------------------------------

    GCC 4.4 complains about this now.

    Signed-off-by: Ron Lee <ron@debian.org>

commit d14c7ec2b51fb92c4a5218b299b772c3d186510d
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Mon Nov 9 13:09:57 2009 -0800

    Fix SMC91111 regression: lpd7a40x build failures

    Both lpd7a400 and lpd7a404 failed to compile because they had
    CONFIG_SMC_USE_IOFUNCS defined:

    examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw'

    Also removed an orphaned paren in lpd7a404.h

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1031ae960ce6ce8332190278a06e2d72c2b2793e
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Mon Nov 9 14:01:08 2009 -0800

    SMC91111: Clean up SMC_inx macros on xsengine and xaeniax

    This patch fixes the following warnings:

    Configuring for xaeniax board...
    smc91111_eeprom.c: In function 'print_macaddr':
    smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of &
    smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of &
    ...
    Configuring for xsengine board...
    smc91111_eeprom.c: In function 'print_macaddr':
    smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift
    smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 830c7b6722c6a9762411bf52a7bf2fae4dc71dab
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Mon Nov 9 11:43:18 2009 -0800

    Fix CS8900 regression on impa7 board

    The following error was seen on impa7 board, due to its use of a 32-bit bus
    on CS8900.
    cs8900.c:137:37: error: macro "get_reg_init_bus" passed 2 arguments, but takes just 1

    This patch gives the macro the correct number of arguments

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit e5c5d9e0834bacf1c4787fa76cc4e369f2597cf5
Author: Mike Frysinger <vapier@gentoo.org>
Date:	Sun Nov 1 22:39:56 2009 -0500

    clarify eth driver halt/recv steps

    The dev->halt() func can be called at any time, and the dev->recv() func
    does not need to use NetRxPackets[] when calling NetReceive().

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 497ab0eec5e1e2dfccc141a4485cd6b940e1424a
Author: Hui.Tang <zetalabs@gmail.com>
Date:	Thu Nov 5 09:58:44 2009 +0800

    Fix cs8900 dev->priv not init issue

    Ensure all CS8900 data structures are assigned before accessing device

    Signed-off-by: Hui.Tang <zetalabs@gmail.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 4fe5193d464ecdac26ddc71b1351be5b86bbff29
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 3 14:34:45 2009 +0100

    ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES)

    This error only appears when DEBUG is enabled in this driver. That's why
    it went unnoticed till now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 916ed9444d3ab7b5cd6312557005f2a764a8baf7
Author: Stefan Roese <sr@denx.de>
Date:	Thu Oct 29 18:37:45 2009 +0100

    ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)

    This patch fixes a problem only seen very occasionally on Canyonlands.
    The NOR flash interface (CFI driver) doesn't work reliably in all cases.
    Erasing and/or programming sometimes doesn't work. Sometimes with
    an error message, like "flash not erased" when trying to program an
    area that should have just been erased. And sometimes without any error
    messages. As mentioned above, this problem was only seen rarely and with
    some PLL configuration (CPU speed, EBC speed).

    Now I spotted this problem a few times, when running my Canyonlands with
    the following setup (chip_config):

    1000-nor	     - NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100

    Changing the EBC configuration to not release the bus into high
    impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1
    in EBC0_CFG) seems to fix this problem. I haven't seen any failure
    anymore with this patch applied.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: David Mitchell <dmitchell@amcc.com>
    Cc: Jeff Mann <MannJ@embeddedplanet.com>

commit 25793f76bf9a7be59c9415ef0f78d034e8d53dae
Author: Remy Bohmer <linux@bohmer.net>
Date:	Thu Oct 29 12:29:37 2009 +0100

    ARM: Use Linux version for unaligned access code

    The asm-arm/unaligned.h includes linux/unaligned/access_ok.h
    This file is unsafe to be used on ARM, since it does an unaligned memory
    accesses which fails on ARM.

    Lookin at Linux the basic difference seems to be the header
    "include/asm-arm/unaligned.h". The Linux version of "unaligned.h"
    does *not* include "access_ok.h" at all. It includes "le_byteshift.h"
    and "be_byteshift.h" instead.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Stefan Roese <sr@denx.de>
    --
     include/asm-arm/unaligned.h	    |	 3 -
     include/linux/unaligned/be_byteshift.h |	70 +++++++++++++++++++++++++++++++++
     include/linux/unaligned/le_byteshift.h |	70 +++++++++++++++++++++++++++++++++
     3 files changed, 142 insertions(+), 1 deletion(-)
     create mode 100644 include/linux/unaligned/be_byteshift.h
     create mode 100644 include/linux/unaligned/le_byteshift.h

commit 6d6e7c53d5c75e5e24841c5506f4ed9d82adee09
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Nov 4 18:02:10 2009 -0600

    ppc/85xx: Fix inclusion of 83xx immap in 85xx builds

    The nand_boot_fsl_elbc.c is shared between 83xx & 85xx however we should
    not be including the immap_83xx.h when building 85xx.  We can just get
    this all from common.h

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 107b579c75256212d4bf8b99ee8d68e0078f3646
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:	Wed Nov 4 17:34:04 2009 -0600

    86xx: Remove redundant code in initdram

    The same code exists both inside an #ifdef and outside of it.
    Remove the extra code for all the 86xx boards.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 715d8f7608f77c93f1807a032644893fd5b6d08b
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Mon Nov 2 09:05:49 2009 -0600

    fsl_pci_init_port end-point initialization is broken

    commit 70ed869e broke fsl pcie end-point initialization.
    Returning 0 is not correct.  The function must return the first free
    bus number for the next controller.

    fsl_pci_init() must still be called and a bus allocated even if the
    controller is an end-point.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 01471d538fb163f472a769f21267d7676c91267c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Wed Nov 4 01:29:04 2009 -0600

    Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"

    This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc.

    There isn't any need to modify the API for fsl_pci_init_port to pass the
    status of host/agent(end-point) status.  We can determine that
    internally to fsl_pci_init_port.  Revert the patch that makes the API
    change.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ff88229549e08fdd3f9127c1cc4db11a3576250f
Author: Dave Liu <daveliu@freescale.com>
Date:	Sat Oct 31 07:59:55 2009 +0800

    ppc/85xx: Fix misc L2 cache enabling bug

    We need loop-check the flash clear lock and enable bit for L2 cache.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 59434fe243962758742af5cb8e2ced976e17c302
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 30 10:16:27 2009 +0900

    sh: Update lowlevel_init.S of espt-giga

    There was the point that did not use write macro.
    Change to write macro.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit f1cae1969d9e971fb72827a5731ce7e752464aa2
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Fri Oct 30 10:01:25 2009 +0900

    sh: Move some defs to convince 'pcrel too far'

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
    Signed-off-by: Takashi Yoshii <yoshii.takashi@gmail.com>

commit 0f9eaf4b323ea0ca95944b84c7465b81ba575514
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:	Thu Oct 15 13:36:34 2009 +0900

    sh: Remove malloc_bin_reloc from lib_sh, lib_nios2 and lib_nios.

    By "arm/microblaze/nios/nios2/sh: Remove relocation fixups"
    (commit: 0630535e2d062dd73c1ceca5c6125c86d1127a49", doesn't need
    malloc_bin_reloc function. This commit remove this.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 0775437293a6963cb21244dfae6978cbf67c6bfe
Author: Ben Warren <biggerbadderben@gmail.com>
Date:	Wed Oct 21 21:53:39 2009 -0700

    Fix DM9000 MAC address handling

    Proper behavior is to pull MAC address from NVRAM in the initialization() an
    stuff it in dev->address, then program the device from dev->address in
    the init() function.

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 98d92d8c9f4021629a45261ad5ec3f3595f3a27a
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Oct 28 22:07:56 2009 +0100

    sbc8349: fix incorrect comment

    The comment for the BR0_PRELIM port size initialization incorrectly
    stated 32 bit, while it's actually 16 bit. The code is correct.

    Reported-by: Guenter Koellner <guenter.koellner@nsn.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a38f85e180a30b6225808828ded1017b1a5418c6
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:	Wed Oct 28 11:05:03 2009 -0400

    Fix Compliation warning for TNY-A9260 and TNY-A9G20

    The patch fixes a compilation warning by defining
    CONFIG_SYS_64BIT_VSPRINTF in the config file

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 264e42ee54f1d322805d9068168fd362b413fd09
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:	Wed Oct 28 11:04:53 2009 -0400

    Fix Compliation warning for SBC35-A9G20 board

    The patch fixes a compilation warning by defining
    CONFIG_SYS_64BIT_VSPRINTF in the config file

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 353462f6ff9769091fb644d44d8025f20a4192d9
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:	Wed Oct 28 09:37:33 2009 -0500

    galaxy5200: Add default environment variables

    Extend bootdelay to 10 seconds.  Set boot retry time to 120 seconds and use
    reset to retry.  Define default bootcommand and bootargs for production.

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

commit fa36ae790eb10ce70935f9a78f07703719dca422
Author: Stefan Roese <sr@denx.de>
Date:	Tue Oct 27 15:15:55 2009 +0100

    cfi: Add weak default function for flash_cmd_reset()

    Currently the CFI driver issues both AMD and Intel reset commands.
    This is because the driver doesn't know yet which chips are connected.
    This dual reset seems to cause problems with the M29W128G chips as
    reported by Richard Retanubun. This patch now introduces a weak default
    function for the CFI reset command, still with both resets. This can
    be overridden by a board specific version if necessary.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com>

commit 4946775c6db52dba28f72ba3525764b54f1d4593
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Oct 28 00:49:47 2009 +0100

    Coding Style cleanup; update CHANGELOG, prepare -rc1

    Signed-off-by: Wolfgang Denk <wd@denx.de>

1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
commit 246c69225c7b962d5c93e92282b78ca9fc5fefee
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Oct 25 15:12:56 2009 -0500

    Add 'editenv' command

    The editenv command can be used to edit an environment variable.
    Editing an environment variable is useful when one wants to tweak an
    existing variable, for example fix a typo or change the baudrate in the
    'bootargs' environment variable.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit b0fa8e50632a628766db23f5c884ec63f1469552
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Oct 25 15:12:55 2009 -0500

    setenv(): Delete 0-length environment variables

    Previously setenv() would only delete an environment variable if it
    was passed a NULL string pointer as a value.  It should also delete an
    environment variable when it encounters a valid string pointer of
    0-length.

    This change/fix is generally useful and is necessary for the upcoming
    "editenv" command.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit ecc5500ee487170d8af6ff893fd1e0082380a01a
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Oct 25 15:12:54 2009 -0500

    readline(): Add ability to modify a string buffer

    If the 'buf' parameter is a non-0-length string, its contents will be
    edited.  Previously, the initial contents of 'buf' were ignored and the
    user entered its contents from scratch.

    This change is necessary to support the upcoming "editenv" command but
    could also be used for future commands which require a user to modify
    an existing string.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit f923943843cd617d681387e7fe81a48060cc6401
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Oct 25 15:12:53 2009 -0500

    cread_line(): Remove unused variables

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit e491a71e578e93bd3b2f8f20d8ef8f111c98010d
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Sun Oct 25 15:12:52 2009 -0500

    Check for NULL prompt in readline_into_buffer()

    Previously, passing readline() or readline_into_buffer() a NULL 'prompt'
    parameter would result in puts() printing garbage when
    CONFIG_CMDLINE_EDITING was enabled.

    Note that no board currently triggers this bug.  Enabling
    CONFIG_CMDLINE_EDITING on some boards (eg bab7xx) would result in
    the bug appearing.	This change is only intended to prevent someone
    from running into this issue in the future.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 16d1c10783660f3fdbc3c19141f42f3b0d1834d3
Author: Wolfgang Denk <wd@denx.de>
Date:	Sun Oct 25 23:00:09 2009 +0100

    drivers/net/phy/miiphybb.c: fix warning: no newline at end of file

    Add missing newline.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Luigi Mantellini <luigi.mantellini@idf-hit.com>
    Cc: Ben Warren <biggerbadderben@gmail.com>

commit a747a7f31059b9069e97c78bba5496409c33aa05
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Oct 27 00:03:32 2009 +0100

    Revert "env: only build env_embedded and envcrc when needed"

    Breaks building on many boards, and no really clean fix available yet.

    This reverts commit 6dab6add2d8ee80905234b326abc3de11be1d178.

commit 3fca80375981fe83d4674a0267183b469a1ea7ff
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 15 17:47:16 2009 +0400

    mpc85xx: Configure QE USB for MPC8569E-MDS boards

    Setup QE pin multiplexing for USB function, configure needed BCSRs
    and add some fdt fixups.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 14809b6c21c89dd65abaf3fea7627fb5ea0f78a3
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 15 17:47:13 2009 +0400

    mpc85xx: Configure QE UART for MPC8569E-MDS boards

    To make QE UART usable by Linux we should setup pin multiplexing
    and turn UCC2 Ethernet node into UCC2 QE UART node.

    Also, QE UART is mutually exclusive with UART0, so we can't enable
    it if eSDHC is in 4-bits mode on pilot boards, or if it's a prototype
    board with eSDHC in 1- or 4-bits mode.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 70d665b1d230b9575a647948e8db3da1e6743e5c
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 15 17:47:11 2009 +0400

    mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards

    SPI Flash (M25P40) is connected to the SPI1 bus, we need a few
    qe_iop entries to actually enable SPI1 on these boards.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 65dec3b4599a17e83ec69dfd059e4ea1e795ef37
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 15 17:47:09 2009 +0400

    mpc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards

    This patch sets memory window for Serial RapidIO on MPC8569E-MDS
    boards.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a29155e12286cc5ec2df72c1cab28e3659bfdad5
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 15 17:47:08 2009 +0400

    mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards

    Simply add some defines, and adjust TLBe setup to include some
    space for eLBC NAND.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7f52ed5ef1b490da282ace3316be381a6abf96a5
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:	Thu Oct 15 17:47:06 2009 +0400

    mpc85xx: Add eSDHC support for MPC8569E-MDS boards

    eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2
    (in 1-bit mode). When eSDHC is used, we should switch u-boot console to
    UART1, and make the proper device-tree fixups.

    Because of an erratum in prototype boards it is impossible to use eSDHC
    without disabling UART0 (which makes it quite easy to 'brick' the board
    by simply issung 'setenv hwconfig esdhc', and not able to interact with
    U-Boot anylonger).

    So, but default we assume that the board is a prototype, which is a most
    safe assumption. There is no way to determine board revision from a
    register, so we use hwconfig.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 48618126f78f05042dae428811809b594f747eb9
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Fri Oct 23 15:55:48 2009 -0500

    xpedite5370: Enable multi-core support

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb
Author: Peter Tyser <ptyser@xes-inc.com>
Date:	Fri Oct 23 15:55:47 2009 -0500

    85xx: MP Boot Page Translation update

    This change has 3 goals:
    - Have secondary cores be released into spin loops at their 'true'
      address in SDRAM.  Previously, secondary cores were put into spin
      loops in the 0xfffffxxx address range which required that boot page
      translation was always enabled while cores were in their spin loops.

    - Allow the TLB window that the primary core uses to access the
      secondary cores boot page to be placed at any address.  Previously, a
      TLB window at 0xfffff000 was always used to access the seconary cores'
      boot page.  This TLB address requirement overlapped with other
      peripherals on some boards (eg XPedite5370).  By default, the boot
      page TLB will still use the 0xfffffxxx address range, but this can be
      overridden on a board-by-board basis by defining a custom
      CONFIG_BPTR_VIRT_ADDR.  Note that the TLB used to map the boot page
      remains in use while U-Boot executes.  Previously it was only
      temporarily used, then restored to its initial value.

    - Allow Boot Page Translation to be disabled on bootup.  Previously,
      Boot Page Translation was always left enabled after secondary cores
      were brought out of reset.  This caused the 0xfffffxxx address range
      to somewhat "magically" be translated to an address in SDRAM.  Some
      boards may not want this oddity in their memory map, so defining
      CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after
      the secondary cores are initialized.

    These changes are only applicable to 85xx boards with CONFIG_MP defined.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc
Author: Vivek Mahajan <vivek.mahajan@freescale.com>
Date:	Tue Oct 27 12:18:55 2009 +0530

    ppc/85xx/pci: fsl_pci_init: pcie agent mode support

    Originally written by Jason Jin and Mingkai Hu for mpc8536.

    When QorIQ based board is configured as a PCIe agent, then unlock/enable
    inbound PCI configuration cycles and init a 4K inbound memory window;
    so that a PCIe host can access the PCIe agents SDRAM at address 0x0

    * Supported in fsl_pci_init_port() after adding pcie_ep as a param
    * Revamped copyright in drivers/pci/fsl_pci_init.c
    * Mods in 85xx based board specific pci init after this change

    Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 273a28ad9ef59dcfcd4c056ec1f61f1e0896cfaa
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:	Tue Oct 27 09:36:38 2009 +0530

    85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data rate

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 924024c396761c267b948f38d78e9905f2036501
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:	Tue Oct 27 09:26:55 2009 +0530

    85xx/p1_p2rdb: Fix crash while configuring 32 bit DDR i/f for P1020RDB.

    The data being modified was in NOR flash which caused the crash.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Wolfgang Denk's avatar
Wolfgang Denk committed
1667
1668
1669
1670
1671
1672
1673
1674
1675
commit 2c0c58b92dbb68007061bdc0edd23bdf142efebf
Author: Sergey Mironov <ierton@gmail.com>
Date:	Wed Sep 23 16:47:38 2009 +0400

    Fix bug in jumptable call stubs for SPARC.

    Signed-off-by: Sergey Mironov <ierton@gmail.com>
    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
3351
3352
3353
3354
3355
3356
3357
3358
3359
3360
3361
3362
3363
3364
3365
3366
3367
3368
3369
3370
3371
3372
3373
3374
3375
3376
3377
3378
3379
3380
3381
3382
3383
3384
3385
3386
3387
3388
3389
3390
3391
3392
3393
3394
3395
3396
3397
3398
3399
3400
3401
3402
3403
3404
3405
3406
3407
3408
3409
3410
3411
3412
3413
3414
3415
3416
3417
3418
3419
3420
3421
3422
3423
3424
3425
3426
3427
3428
3429
3430
3431
3432
3433
3434
3435
3436
3437
3438
3439
3440
3441
3442
3443
3444
3445
3446
3447
3448
3449
3450
3451
3452
3453
3454
3455
3456
3457
3458
3459
3460
3461
3462
3463
3464
3465
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
3480
3481
3482
3483
3484
3485
3486
3487
3488
3489
3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
3505
3506
3507
3508
3509
3510
3511
3512
3513
3514
3515
3516
3517
3518
3519
3520
3521
3522
3523
3524
3525
3526
3527
3528
3529
3530
3531
3532
3533
3534
3535
3536
3537
3538
3539
3540
3541
3542
3543
3544
3545
3546
3547
3548
3549
3550
3551
3552
3553
3554
3555
3556
3557
3558
3559
3560
3561
3562
3563
3564
3565
3566
3567
3568
3569
3570
3571
3572
3573
3574
3575
3576
3577
3578
3579
3580
3581
3582
3583
3584
3585
3586
3587
3588
3589
3590
3591
3592
3593
3594
3595
3596
3597
3598
3599
3600
3601
3602
3603
3604
3605
3606
3607
3608
3609
3610
3611
3612
3613
3614
3615
3616
3617
3618
3619
3620
3621
3622
3623
3624
3625
3626
3627
3628
3629
3630
3631
3632
3633
3634
3635
3636
3637
3638
3639
3640
3641
3642
3643
3644
3645
3646
3647
3648
3649
3650
3651
3652
3653
3654
3655
3656
3657
3658
3659
3660
3661
3662
3663
3664
3665
3666
3667
3668
3669
3670
3671
3672
3673
3674
3675
3676
3677
3678
3679
3680
3681
3682
3683
3684
3685
3686
3687
3688
3689
3690
3691
3692
3693
3694
3695
3696
3697
3698
3699
3700
3701
3702
3703
3704
3705
3706
3707
3708
3709
3710
3711
3712
3713
3714
3715
3716
3717
3718
3719
3720
3721
3722
3723
3724
3725
3726
3727
3728
3729
3730
3731
3732
3733
3734
3735
3736
3737
3738
3739
3740
3741
3742
3743
3744
3745
3746
3747
3748
3749
3750
3751
3752
3753
3754
3755
3756
3757
3758
3759
3760
3761
3762
3763
3764
3765
3766
3767
3768
3769
3770
3771
3772
3773
3774
3775
3776
3777
3778
3779
3780
3781
3782
3783
3784
3785
3786
3787
3788
3789
3790
3791
3792
3793
3794
3795
3796
3797
3798
3799
3800
3801
3802
3803
3804
3805
3806
3807
3808
3809
3810
3811
3812
3813
3814
3815
3816
3817
3818
3819
3820
3821
3822
3823
3824
3825
3826
3827
3828
3829
3830
3831
3832
3833
3834
3835
3836
3837
3838
3839
3840
3841
3842
3843
3844
3845
3846
3847
3848
3849
3850
3851
3852
3853
3854
3855
3856
3857
3858
3859
3860
3861
3862
3863
3864
3865
3866
3867
3868
3869
3870
3871
3872
3873
3874
3875
3876
3877
3878
3879
3880
3881
3882
3883
3884
3885
3886
3887
3888
3889
3890
3891
3892
3893
3894
3895
3896
3897
3898
3899
3900
3901
3902
3903
3904
3905
3906
3907
3908
3909
3910
3911
3912
3913
3914
3915
3916
3917
3918
3919
3920
3921
3922
3923
3924
3925
3926
3927
3928
3929
3930
3931
3932
3933
3934
3935
3936
3937
3938
3939
3940
3941
3942
3943
3944
3945
3946
3947
3948
3949
3950
3951
3952
3953
3954
3955
3956
3957
3958
3959
3960
3961
3962
3963
3964
3965
3966
3967
3968
3969
3970
3971
3972
3973
3974
3975
3976
3977
3978
3979
3980
3981
3982
3983
3984
3985
3986
3987
3988
3989
3990
3991
3992
3993
3994
3995
3996
3997
3998
3999
4000
4001
4002
4003
4004
4005
4006
4007
4008
4009
4010
4011
4012
4013
4014
4015
4016
4017
4018
4019
4020
4021
4022
4023
4024
4025
4026
4027
4028
4029
4030
4031
4032
4033
4034
4035
4036
4037
4038
4039
4040
4041
4042
4043
4044
4045
4046
4047
4048
4049
4050
4051
4052
4053
4054
4055
4056
4057
4058
4059
4060
4061
4062
4063
4064
4065
4066
4067
4068
4069
4070
4071
4072
4073
4074
4075
4076
4077
4078
4079
4080
4081
4082
4083
4084
4085
4086
4087
4088
4089
4090
4091
4092
4093
4094
4095
4096
4097
4098
4099
4100
4101
4102
4103
4104
4105
4106
4107
4108
4109
4110
4111
4112
4113
4114
4115
4116
4117
4118
4119
4120
4121
4122
4123
4124
4125
4126
4127
4128
4129
4130
4131
4132
4133
4134
4135
4136
4137
4138
4139
4140
4141
4142
4143
4144
4145
4146
4147
4148
4149
4150
4151
4152
4153
4154
4155
4156
4157
4158
4159
4160
4161
4162
4163
4164
4165
4166
4167
4168
4169
4170
4171
4172
4173
4174
4175
4176
4177
4178
4179
4180
4181
4182
4183
4184
4185
4186
4187
4188
4189
4190
4191
4192
4193
4194
4195
4196
4197
4198
4199
4200
4201
4202
4203
4204
4205
4206
4207
4208
4209
4210
4211
4212
4213
4214
4215
4216
4217
4218
4219
4220
4221
4222
4223
4224
4225
4226
4227
4228
4229
4230
4231
4232
4233
4234
4235
4236
4237
4238
4239
4240
4241
4242
4243
4244
4245
4246
4247
4248
4249
4250
4251
4252
4253
4254
4255
4256
4257
4258
4259
4260
4261
4262
4263
4264
4265
4266
4267
4268
4269
4270
4271
4272
4273
4274
4275
4276
4277
4278
4279
4280
4281
4282
4283
4284
4285
4286
4287
4288
4289
4290
4291
4292
4293
4294
4295
4296
4297
4298
4299
4300
4301
4302
4303
4304
4305
4306
4307
4308
4309
4310
4311
4312
4313
4314
4315
4316
4317
4318
4319
4320
4321
4322
4323
4324
4325
4326
4327
4328
4329
4330
4331
4332
4333
4334
4335
4336
4337
4338
4339
4340
4341
4342
4343
4344
4345
4346
4347
4348
4349
4350
4351
4352
4353
4354
4355
4356
4357
4358
4359
4360
4361
4362
4363
4364
4365
4366
4367
4368
4369
4370
4371
4372
4373
4374
4375
4376
4377
4378
4379
4380
4381
4382
4383
4384
4385
4386
4387
4388
4389
4390
4391
4392
4393
4394
4395
4396
4397
4398
4399
4400
4401
4402
4403
4404
4405
4406
4407
4408
4409
4410
4411
4412
4413
4414
4415
4416
4417
4418
4419
4420
4421
4422
4423
4424
4425
4426
4427
4428
4429
4430
4431
4432
4433
4434
4435
4436
4437
4438
4439
4440
4441
4442
4443
4444
4445
4446
4447
4448
4449
4450
4451
4452
4453
4454
4455
4456
4457
4458
4459
4460
4461
4462
4463
4464
4465
4466
4467
4468
4469
4470
4471
4472
4473
4474
4475
4476
4477
4478
4479
4480
4481
4482
4483
4484
4485
4486
4487
4488
4489
4490
4491
4492
4493
4494
4495
4496
4497
4498
4499
4500
4501
4502
4503
4504
4505
4506
4507
4508
4509
4510
4511
4512
4513
4514
4515
4516
4517
4518
4519
4520
4521
4522
4523
4524
4525
4526
4527
4528
4529
4530
4531
4532
4533
4534
4535
4536
4537
4538
4539
4540
4541
4542
4543
4544
4545
4546
4547
4548
4549
4550
4551
4552
4553
4554
4555
4556
4557
4558
4559
4560
4561
4562
4563
4564
4565
4566
4567
4568
4569
4570
4571
4572
4573
4574
4575
4576
4577
4578
4579
4580
4581
4582
4583
4584
4585
4586
4587
4588
4589
4590
4591
4592
4593
4594
4595
4596
4597
4598
4599
4600
4601
4602
4603
4604
4605
4606
4607
4608
4609
4610
4611
4612
4613
4614
4615
4616
4617
4618
4619
4620
4621
4622
4623
4624
4625
4626
4627
4628
4629
4630
4631
4632
4633
4634
4635
4636
4637
4638
4639
4640
4641
4642
4643
4644
4645
4646
4647
4648
4649
4650
4651
4652
4653
4654
4655
4656
4657
4658
4659
4660
4661
4662
4663
4664
4665
4666
4667
4668
4669
4670
4671
4672
4673
4674
4675
4676
4677
4678
4679
4680
4681
4682
4683
4684
4685
4686
4687
4688
4689
4690
4691
4692
4693
4694
4695
4696
4697
4698
4699
4700
4701
4702
4703
4704
4705
4706
4707
4708
4709
4710
4711
4712
4713
4714
4715
4716
4717
4718
4719
4720
4721
4722
4723
4724
4725
4726
4727
4728
4729
4730
4731
4732
4733
4734
4735
4736
4737
4738
4739
4740
4741
4742
4743
4744
4745
4746
4747
4748
4749
4750
4751
4752
4753
4754
4755
4756
4757
4758
4759
4760
4761
4762
4763
4764
4765
4766
4767
4768
4769
4770
4771
4772
4773
4774
4775
4776
4777
4778
4779
4780
4781
4782
4783
4784
4785
4786
4787
4788
4789
4790
4791
4792
4793
4794
4795
4796
4797
4798
4799
4800
4801
4802
4803
4804
4805
4806
4807
4808
4809
4810
4811
4812
4813
4814
4815
4816
4817
4818
4819
4820
4821
4822
4823
4824
4825
4826
4827
4828
4829
4830
4831
4832
4833
4834
4835
4836
4837
4838
4839
4840
4841
4842
4843
4844
4845
4846
4847
4848
4849
4850
4851
4852
4853
4854
4855
4856
4857
4858
4859
4860
4861
4862
4863
4864
4865
4866
4867
4868
4869
4870
4871
4872
4873
4874
4875
4876
4877
4878
4879
4880
4881
4882
4883
4884
4885
4886
4887
4888
4889
4890
4891
4892
4893
4894
4895
4896
4897
4898
4899
4900
4901
4902
4903
4904
4905
4906
4907
4908
4909
4910
4911
4912
4913
4914
4915
4916
4917
4918
4919
4920
4921
4922
4923
4924
4925
4926
4927
4928
4929
4930
4931
4932
4933
4934
4935
4936
4937
4938
4939
4940
4941
4942
4943
4944
4945
4946
4947
4948
4949
4950
4951
4952
4953
4954
4955
4956
4957
4958
4959
4960
4961
4962
4963
4964
4965
4966
4967
4968
4969
4970
4971
4972
4973
4974
4975
4976
4977
4978
4979
4980
4981
4982
4983
4984
4985
4986
4987
4988
4989
4990
4991
4992
4993
4994
4995
4996
4997
4998
4999
5000
5001
5002
5003
5004
5005
5006
5007
5008
5009
5010
5011
5012
5013
5014
5015
5016
5017
5018
5019
5020
5021
5022
5023
5024
5025
5026
5027
5028
5029
5030
5031
5032
5033
5034
5035
5036
5037
5038
5039
5040
5041
5042
5043
5044
5045
5046
5047
5048
5049
5050
5051
5052
5053
5054
5055
5056
5057
5058
5059
5060
5061
5062
5063
5064
5065
5066
5067
5068
5069
5070
5071
5072
5073
5074
5075
5076
5077
5078
5079
5080
5081
5082
5083
5084
5085
5086
5087
5088
5089
5090
5091
5092
5093
5094
5095
5096
5097
5098
5099
5100
5101
5102
5103
5104
5105
5106
5107
5108
5109
5110
5111
5112
5113
5114
5115
5116
5117
5118
5119
5120
5121
5122
5123
5124
5125
5126
5127
5128
5129
5130
5131
5132
5133
5134
5135
5136
5137
5138
5139
5140
5141
5142
5143
5144
5145
5146
5147
5148
5149
5150
5151
5152
5153
5154
5155
5156
5157
5158
5159
5160
5161
5162
5163
5164
5165
5166
5167
5168
5169
5170
5171
5172
5173
5174
5175
5176
5177
5178
5179
5180
5181
5182
5183
5184
5185
5186
5187
5188
5189