Commit 2af181b5 authored by Vignesh Raghavendra's avatar Vignesh Raghavendra Committed by Lokesh Vutla
Browse files

ARM: dts: k3: Add cfg register space for ringacc and udmap



R5 SPL needs access to cfg space of Rings and UDMAP, therefore add RING
CFG, TCHAN CFG and RCHAN CFG address ranges.
Note that these registers are present within respective IPs but are
not populated in Linux DT nodes (as they are configured via TISCI APIs)
and hence are added to -u-boot.dtsi for now.
Signed-off-by: default avatarVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla's avatarLokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210607141753.28796-6-vigneshr@ti.com
parent 00d6fc9c
......@@ -35,11 +35,25 @@
u-boot,dm-spl;
ringacc@2b800000 {
reg = <0x0 0x2b800000 0x0 0x400000>,
<0x0 0x2b000000 0x0 0x400000>,
<0x0 0x28590000 0x0 0x100>,
<0x0 0x2a500000 0x0 0x40000>,
<0x0 0x28440000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
u-boot,dm-spl;
ti,dma-ring-reset-quirk;
};
dma-controller@285c0000 {
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x284c0000 0x0 0x4000>,
<0x0 0x2a800000 0x0 0x40000>,
<0x0 0x284a0000 0x0 0x4000>,
<0x0 0x2aa00000 0x0 0x40000>,
<0x0 0x28400000 0x0 0x2000>;
reg-names = "gcfg", "rchan", "rchanrt", "tchan",
"tchanrt", "rflow";
u-boot,dm-spl;
};
};
......
......@@ -40,6 +40,32 @@
chipid@43000014 {
u-boot,dm-spl;
};
mcu-navss{
u-boot,dm-spl;
ringacc@2b800000 {
reg = <0x0 0x2b800000 0x0 0x400000>,
<0x0 0x2b000000 0x0 0x400000>,
<0x0 0x28590000 0x0 0x100>,
<0x0 0x2a500000 0x0 0x40000>,
<0x0 0x28440000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
u-boot,dm-spl;
};
dma-controller@285c0000 {
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x284c0000 0x0 0x4000>,
<0x0 0x2a800000 0x0 0x40000>,
<0x0 0x284a0000 0x0 0x4000>,
<0x0 0x2aa00000 0x0 0x40000>,
<0x0 0x28400000 0x0 0x2000>;
reg-names = "gcfg", "rchan", "rchanrt", "tchan",
"tchanrt", "rflow";
u-boot,dm-spl;
};
};
};
&secure_proxy_main {
......
......@@ -54,10 +54,24 @@
u-boot,dm-spl;
ringacc@2b800000 {
reg = <0x0 0x2b800000 0x0 0x400000>,
<0x0 0x2b000000 0x0 0x400000>,
<0x0 0x28590000 0x0 0x100>,
<0x0 0x2a500000 0x0 0x40000>,
<0x0 0x28440000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
u-boot,dm-spl;
};
dma-controller@285c0000 {
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x284c0000 0x0 0x4000>,
<0x0 0x2a800000 0x0 0x40000>,
<0x0 0x284a0000 0x0 0x4000>,
<0x0 0x2aa00000 0x0 0x40000>,
<0x0 0x28400000 0x0 0x2000>;
reg-names = "gcfg", "rchan", "rchanrt", "tchan",
"tchanrt", "rflow";
u-boot,dm-spl;
};
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment