ppc4xx: Make output a little shorter on PCIe detection

Now not max 3 lines but 2 lines are printed per PCIe port.
Signed-off-by: Stefan Roese <sr@denx.de>

board/amcc/katmai/katmai.c

@@ -403,15 +403,13 @@ void pcie_setup_hoses(int busno)
 		if (!katmai_pcie_card_present(i))
 			continue;
 
-		if (is_end_point(i)) {
-			printf("PCIE%d: will be configured as endpoint\n", i);
+		if (is_end_point(i))
 			ret = ppc4xx_init_pcie_endport(i);
-		} else {
-			printf("PCIE%d: will be configured as root-complex\n", i);
+		else
 			ret = ppc4xx_init_pcie_rootport(i);
-		}
 		if (ret) {
-			printf("PCIE%d: initialization failed\n", i);
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 

board/amcc/kilauea/kilauea.c

@@ -342,15 +342,13 @@ void pcie_setup_hoses(int busno)
 
 	for (i = 0; i < board_pcie_count(); i++) {
 
-		if (is_end_point(i)) {
-			printf("PCIE%d: will be configured as endpoint\n", i);
+		if (is_end_point(i))
 			ret = ppc4xx_init_pcie_endport(i);
-		} else {
-			printf("PCIE%d: will be configured as root-complex\n", i);
+		else
 			ret = ppc4xx_init_pcie_rootport(i);
-		}
 		if (ret) {
-			printf("PCIE%d: initialization failed\n", i);
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 

board/amcc/yucca/yucca.c

@@ -853,16 +853,15 @@ void pcie_setup_hoses(int busno)
 			continue;
 
 		if (is_end_point(i)) {
-			printf("PCIE%d: will be configured as endpoint\n",i);
 			yucca_setup_pcie_fpga_endpoint(i);
 			ret = ppc4xx_init_pcie_endport(i);
 		} else {
-			printf("PCIE%d: will be configured as root-complex\n",i);
 			yucca_setup_pcie_fpga_rootpoint(i);
 			ret = ppc4xx_init_pcie_rootport(i);
 		}
 		if (ret) {
- 			printf("PCIE%d: initialization failed\n", i);
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}