Commit dcb2f95a authored by stroese's avatar stroese
Browse files

* Patch by Stefan Roese, 03 May 2005:

  Update for P3G4
  Fix problems in cmd_universe.c
parent 9f709b6c
......@@ -629,6 +629,7 @@ static void gt_setup_ide (struct pci_controller *hose,
}
}
#ifndef CONFIG_P3G4
static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
{
unsigned char pin, irq;
......@@ -642,6 +643,7 @@ static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
}
}
#endif
struct pci_config_table gt_config_table[] = {
{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
......@@ -651,12 +653,16 @@ struct pci_config_table gt_config_table[] = {
};
struct pci_controller pci0_hose = {
#ifndef CONFIG_P3G4
fixup_irq:gt_fixup_irq,
#endif
config_table:gt_config_table,
};
struct pci_controller pci1_hose = {
#ifndef CONFIG_P3G4
fixup_irq:gt_fixup_irq,
#endif
config_table:gt_config_table,
};
......@@ -692,8 +698,10 @@ void pci_init_board (void)
pci_register_hose (&pci0_hose);
#ifndef CONFIG_P3G4
pciArbiterEnable (PCI_HOST0);
pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
#endif
command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MASTER;
......@@ -735,8 +743,10 @@ void pci_init_board (void)
pci_register_hose (&pci1_hose);
#ifndef CONFIG_P3G4
pciArbiterEnable (PCI_HOST1);
pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
#endif
command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MASTER;
......
......@@ -72,6 +72,9 @@ int universe_init(void)
dev->busdevfn = busdevfn;
pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_1, &val);
if (val & 1) {
pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
}
val &= ~0xf;
dev->uregs = (UNIVERSE *)val;
......@@ -102,7 +105,13 @@ int universe_init(void)
* Arbitration Mode
* DTACK Enable
*/
writel(0x15060000, &dev->uregs->misc_ctl);
writel(0x15040000 | (readl(&dev->uregs->misc_ctl) & 0x00020000), &dev->uregs->misc_ctl);
if (readl(&dev->uregs->misc_ctl) & 0x00020000) {
debug ("System Controller!\n"); /* test-only */
} else {
debug ("Not System Controller!\n"); /* test-only */
}
/*
* Lets turn off interrupts
......@@ -114,12 +123,14 @@ int universe_init(void)
writel(0x0000, &dev->uregs->lint_map1); /* Map all ints to 0 */
eieio();
return 0;
break_30:
free(dev);
break_20:
lastError = result;
return 0;
return result;
}
......@@ -193,13 +204,13 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si
switch (pms & PCI_MS_Mxx) {
case PCI_MS_MEM:
ctl = 0x00000000;
ctl |= 0x00000000;
break;
case PCI_MS_IO:
ctl = 0x00000001;
ctl |= 0x00000001;
break;
case PCI_MS_CONFIG:
ctl = 0x00000002;
ctl |= 0x00000002;
break;
}
......@@ -278,13 +289,13 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si
switch (pms & PCI_MS_Mxx) {
case PCI_MS_MEM:
ctl = 0x00000000;
ctl |= 0x00000000;
break;
case PCI_MS_IO:
ctl = 0x00000001;
ctl |= 0x00000001;
break;
case PCI_MS_CONFIG:
ctl = 0x00000002;
ctl |= 0x00000002;
break;
}
......
......@@ -28,8 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/processor.h>
#ifndef __ASSEMBLY__
#include <galileo/core.h>
#endif
......@@ -66,7 +64,7 @@
* mpsc channel, change CONFIG_MPSC_PORT to the desired value.
*/
#define CONFIG_MPSC
#define CONFIG_MPSC_PORT 1
#define CONFIG_MPSC_PORT 0
#define CONFIG_NET_MULTI /* attempt all available adapters */
......@@ -75,20 +73,46 @@
#undef CONFIG_ETHER_PORT_MII /* use RMII */
#if 1
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp;" \
"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:" \
"$netmask:$hostname:eth0:none;" \
"bootm"
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=p3g4\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip addtty;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_74xx\0" \
"bootfile=/tftpboot/p3g4/uImage\0" \
"kernel_addr=ff000000\0" \
"ramdisk_addr=ff010000\0" \
"load=tftp 100000 /tftpboot/p3g4/u-boot.bin\0" \
"update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
"cp.b 100000 fff00000 $(filesize);" \
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
......@@ -101,7 +125,15 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ASKENV)
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_PCI | \
CFG_CMD_ELF | \
CFG_CMD_MII | \
CFG_CMD_PING | \
CFG_CMD_UNIVERSE| \
CFG_CMD_BSP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
......@@ -271,21 +303,20 @@
/* PCI MEMORY MAP section */
#define CFG_PCI0_MEM_BASE 0x80000000
#define CFG_PCI0_MEM_SIZE _128M
#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
#define CFG_PCI1_MEM_BASE 0x88000000
#define CFG_PCI1_MEM_SIZE _128M
#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)
/* PCI I/O MAP section */
#define CFG_PCI0_IO_BASE 0xfa000000
#define CFG_PCI0_IO_SIZE _16M
#define CFG_PCI1_IO_BASE 0xfb000000
#define CFG_PCI1_IO_SIZE _16M
#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
#define CFG_PCI0_IO_SPACE_PCI 0x00000000
#define CFG_PCI1_IO_BASE 0xfb000000
#define CFG_PCI1_IO_SIZE _16M
#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
#define CFG_PCI1_IO_SPACE_PCI 0x00000000
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment