Commit f20393c5 authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Prepare v2009.11.1



Update CHANGELOG
Signed-off-by: Wolfgang Denk's avatarWolfgang Denk <wd@denx.de>
parent 580ca3c2
commit 580ca3c2b1d032534195cd0bfd89aa11e8c03bb3
Author: Stefan Roese <sr@denx.de>
Date: Thu Jan 21 11:37:31 2010 +0100
ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration
A newer CPLD version on the 405EX evaluation board requires a different
EBC controller setup for the CPLD register access. This patch adds a CPLD
version detection for Kilauea and code to reconfigure the EBC controller
(chip select 2) for the old CPLD if no new version is found.
Additionally the CPLD version is printed upon bootup:
Board: Kilauea - AMCC PPC405EX Evaluation Board (CPLD rev. 0)
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Cc: Zhang Bao Quan <bqzhang@udtech.com.cn>
commit eb20392ca986074c78ee4f241a8f2369777a8df3
Author: Felix Radensky <felix@embedded-sol.com>
Date: Sat Jan 23 01:35:24 2010 +0200
ppc4xx: Fix sending type 1 PCI transactions
The list of 4xx SoCs that should send type 1 PCI transactions
is not defined correctly. As a result PCI-PCI bridges and devices
behind them are not identified. The following 4xx variants should
send type 1 transactions: 440GX, 440GP, 440SP, 440SPE, 460EX and 460GT.
Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Stefan Roese <sr@denx.de>
commit 57ab8a129dd4121711540e2b976aff882998de51
Author: Felix Radensky <felix@embedded-sol.com>
Date: Tue Jan 19 21:19:06 2010 +0200
ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMs
On platforms where SPD EEPROM and another EEPROM have adjacent
I2C addresses SPD_EEPROM_ADDRESS should be defined as a single
element array, otherwise DDR2 setup code would fail with the
following error:
ERROR: Unknown DIMM detected in slot 1
However, fixing SPD_EEPROM_ADDRESS would result in another
error:
ERROR: DIMM's DDR1 and DDR2 type can not be mixed.
This happens because initdram() routine does not explicitly
initialize dimm_populated array. This patch fixes the problem.
Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Stefan Roese <sr@denx.de>
commit 17ab3057bde25208af71326c0ff213d05eadb318
Author: Felix Radensky <felix@embedded-sol.com>
Date: Tue Jan 19 17:37:13 2010 +0200
ppc4xx: Fix reporting of bootstrap options G and F on 460EX/GT
Bootstrap options G and F are reported incorrectly (G instead
of F and vice versa). This patch fixes this.
Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Stefan Roese <sr@denx.de>
commit a200a7c04d89853d2a1395b96d8ca5e3dd754551
Author: Wolfgang Denk <wd@denx.de>
Date: Tue Dec 15 23:20:54 2009 +0100
Update CHANGELOG; prepare Prepare v2009.11
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit f9476902b789b0481b9df49af88d6ca94fb16fa0 commit f9476902b789b0481b9df49af88d6ca94fb16fa0
Author: Peter Tyser <ptyser@xes-inc.com> Author: Peter Tyser <ptyser@xes-inc.com>
Date: Tue Dec 15 12:10:47 2009 -0600 Date: Tue Dec 15 12:10:47 2009 -0600
...@@ -23,7 +23,7 @@ ...@@ -23,7 +23,7 @@
VERSION = 2009 VERSION = 2009
PATCHLEVEL = 11 PATCHLEVEL = 11
SUBLEVEL = SUBLEVEL = 1
EXTRAVERSION = EXTRAVERSION =
ifneq "$(SUBLEVEL)" "" ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment