Commit 33863f74 authored by Kurt Miller's avatar Kurt Miller Committed by Kever Yang
Browse files

rockchip: rk3328: rock64 - fix gen3 SPL hang



Use the same approach as ROC-RK3328-CC which enables SPL GPIO,
pinctl and regulator support. This allows the gen3 board to
boot through SPL and does not break gen2 in the process.
Signed-off-by: default avatarKurt Miller <kurt@intricatesoftware.com>
Acked-by: default avatarMatwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang's avatarKever Yang <kever.yang@rock-chips.com>
parent 5e50f878
......@@ -11,6 +11,22 @@
};
};
&gpio0 {
u-boot,dm-spl;
};
&pinctrl {
u-boot,dm-spl;
};
&sdmmc0m1_gpio {
u-boot,dm-spl;
};
&pcfg_pull_up_4ma {
u-boot,dm-spl;
};
&usb_host0_xhci {
vbus-supply = <&vcc_host_5v>;
status = "okay";
......@@ -25,3 +41,8 @@
/delete-property/ regulator-always-on;
/delete-property/ regulator-boot-on;
};
/* Need this and all the pinctrl/gpio stuff above to set pinmux */
&vcc_sd {
u-boot,dm-spl;
};
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_ROCKCHIP_RK3328=y
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
......@@ -25,6 +26,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
......@@ -36,7 +39,7 @@ CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_TPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_TPL_OF_PLATDATA=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
......@@ -64,7 +67,9 @@ CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_REGULATOR_PWM=y
CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment