Commit 6633b4d8 authored by Chris Morgan's avatar Chris Morgan Committed by Kever Yang
Browse files

rockchip: px30: Add support for using SFC



This patch adds support for setting the correct pin configuration
for the Rockchip Serial Flash Controller found on the PX30.
Signed-off-by: default avatarChris Morgan <macromorgan@hotmail.com>
Signed-off-by: default avatarJon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang's avatarKever Yang <kever.yang@rock-chips.com>
parent 3fb08a21
......@@ -51,6 +51,57 @@ struct mm_region *mem_map = px30_mem_map;
#define QOS_PRIORITY_LEVEL(h, l) ((((h) & 3) << 8) | ((l) & 3))
/* GRF_GPIO1AL_IOMUX */
enum {
GPIO1A3_SHIFT = 12,
GPIO1A3_MASK = 0xf << GPIO1A3_SHIFT,
GPIO1A3_GPIO = 0,
GPIO1A3_FLASH_D3,
GPIO1A3_EMMC_D3,
GPIO1A3_SFC_SIO3,
GPIO1A2_SHIFT = 8,
GPIO1A2_MASK = 0xf << GPIO1A2_SHIFT,
GPIO1A2_GPIO = 0,
GPIO1A2_FLASH_D2,
GPIO1A2_EMMC_D2,
GPIO1A2_SFC_SIO2,
GPIO1A1_SHIFT = 4,
GPIO1A1_MASK = 0xf << GPIO1A1_SHIFT,
GPIO1A1_GPIO = 0,
GPIO1A1_FLASH_D1,
GPIO1A1_EMMC_D1,
GPIO1A1_SFC_SIO1,
GPIO1A0_SHIFT = 0,
GPIO1A0_MASK = 0xf << GPIO1A0_SHIFT,
GPIO1A0_GPIO = 0,
GPIO1A0_FLASH_D0,
GPIO1A0_EMMC_D0,
GPIO1A0_SFC_SIO0,
};
/* GRF_GPIO1AH_IOMUX */
enum {
GPIO1A4_SHIFT = 0,
GPIO1A4_MASK = 0xf << GPIO1A4_SHIFT,
GPIO1A4_GPIO = 0,
GPIO1A4_FLASH_D4,
GPIO1A4_EMMC_D4,
GPIO1A4_SFC_CSN0,
};
/* GRF_GPIO1BL_IOMUX */
enum {
GPIO1B1_SHIFT = 4,
GPIO1B1_MASK = 0xf << GPIO1B1_SHIFT,
GPIO1B1_GPIO = 0,
GPIO1B1_FLASH_RDY,
GPIO1B1_EMMC_CLKOUT,
GPIO1B1_SFC_CLK,
};
/* GRF_GPIO1BH_IOMUX */
enum {
GPIO1B7_SHIFT = 12,
......@@ -193,6 +244,19 @@ int arch_cpu_init(void)
GPIO1D4_SDMMC_D2 << GPIO1D4_SHIFT);
#endif
#ifdef CONFIG_ROCKCHIP_SFC
rk_clrsetreg(&grf->gpio1al_iomux,
GPIO1A3_MASK | GPIO1A2_MASK | GPIO1A1_MASK | GPIO1A0_MASK,
GPIO1A3_SFC_SIO3 << GPIO1A3_SHIFT |
GPIO1A2_SFC_SIO2 << GPIO1A2_SHIFT |
GPIO1A1_SFC_SIO1 << GPIO1A1_SHIFT |
GPIO1A0_SFC_SIO0 << GPIO1A0_SHIFT);
rk_clrsetreg(&grf->gpio1ah_iomux, GPIO1A4_MASK,
GPIO1A4_SFC_CSN0 << GPIO1A4_SHIFT);
rk_clrsetreg(&grf->gpio1bl_iomux, GPIO1B1_MASK,
GPIO1B1_SFC_CLK << GPIO1B1_SHIFT);
#endif
#endif
/* Enable PD_VO (default disable at reset) */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment