1. 07 Jul, 2020 3 commits
    • Peter Robinson's avatar
      rockchip: Pinebook Pro: Fix USB and the USB attached keyboard · 3a577124
      Peter Robinson authored and Kever Yang's avatar Kever Yang committed
      
      
      The built in keyboard on the Pinebook Pro is attached via USB so
      fix this up to ensure USB works as expected.
      Signed-off-by: default avatarPeter Robinson <pbrobinson@gmail.com>
      Reviewed-by: Kever Yang's avatarKever Yang <kever.yang@rock-chips.com>
      3a577124
    • Peter Robinson's avatar
      rockchip: Pinebook Pro: enable rng to provide an entropy source · dc38a583
      Peter Robinson authored and Kever Yang's avatar Kever Yang committed
      
      
      Enable the rng so UEFI can provide entropy for KASLR
      Signed-off-by: default avatarPeter Robinson <pbrobinson@gmail.com>
      Reviewed-by: Kever Yang's avatarKever Yang <kever.yang@rock-chips.com>
      dc38a583
    • Marcin Juszkiewicz's avatar
      rockchip: rockpro64: initialize USB in preboot · f81f9f0e
      Marcin Juszkiewicz authored and Kever Yang's avatar Kever Yang committed
      
      
      With video output enabled and USB keyboard supported there is no need
      for serial console. So let initialize USB subsystem so keyboard connected to
      board (either directly or via hub) can be used to interrupt autoboot.
      
      U-Boot TPL 2020.07-rc3-00123-g52d6cbd1a7 (Jun 03 2020 - 17:34:20)
      Channel 0: LPDDR4, 50MHz
      BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
      Channel 1: LPDDR4, 50MHz
      BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
      256B stride
      256B stride
      lpddr4_set_rate: change freq to 400000000 mhz 0, 1
      lpddr4_set_rate: change freq to 800000000 mhz 1, 0
      Trying to boot from BOOTROM
      Returning to boot ROM...
      
      U-Boot SPL 2020.07-rc3-00123-g52d6cbd1a7 (Jun 03 2020 - 17:34:20 +0200)
      Trying to boot from SPI
      
      U-Boot 2020.07-rc3-00123-g52d6cbd1a7 (Jun 03 2020 - 17:34:20 +0200)
      
      SoC: Rockchip rk3399
      Reset cause: RST
      Model: Pine64 RockPro64 v2.1
      DRAM:  3.9 GiB
      PMIC:  RK808
      MMC:   mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
      Loading Environment from SPI Flash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
      OK
      In:    serial
      Out:   vidconsole
      Err:   vidconsole
      Model: Pine64 RockPro64 v2.1
      Net:   eth0: ethernet@fe300000
      starting USB...
      Bus usb@fe380000: USB EHCI 1.00
      Bus usb@fe3a0000: USB OHCI 1.0
      Bus usb@fe3c0000: USB EHCI 1.00
      Bus usb@fe3e0000: USB OHCI 1.0
      Bus dwc3: Register 2000140 NbrPorts 2
      Starting the controller
      USB XHCI 1.10
      Bus dwc3: Register 2000140 NbrPorts 2
      Starting the controller
      USB XHCI 1.10
      scanning bus usb@fe380000 for devices... 1 USB Device(s) found
      scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
      scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
      scanning bus usb@fe3e0000 for devices... 2 USB Device(s) found
      scanning bus dwc3 for devices... 1 USB Device(s) found
      scanning bus dwc3 for devices... 2 USB Device(s) found
             scanning usb for storage devices... 1 Storage Device(s) found
      Hit any key to stop autoboot:  0
      =>
      Signed-off-by: default avatarMarcin Juszkiewicz <marcin@juszkiewicz.com.pl>
      Reviewed-by: Kever Yang's avatarKever Yang <kever.yang@rock-chips.com>
      f81f9f0e
  2. 06 Jul, 2020 2 commits
  3. 05 Jul, 2020 3 commits
  4. 03 Jul, 2020 8 commits
  5. 02 Jul, 2020 6 commits
  6. 30 Jun, 2020 3 commits
  7. 29 Jun, 2020 3 commits
  8. 28 Jun, 2020 3 commits
  9. 27 Jun, 2020 9 commits