Commit b73e8bf4 authored by Patrick Delaunay's avatar Patrick Delaunay Committed by Patrice Chotard
Browse files

arm: stm32mp: add defconfig for trusted boot with FIP



Add TF-A FIP support for trusted boot on STM32MP15x,
when STM32MP15x_STM32IMAGE is not activated.

With FIP support the SSBL partition is named "fip" and its size is 4MB,
so the ENV partition name in device tree  (for SD card or eMMC)
or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND)
need to be modified.

With FIP the TEE MTD partitions are removed because the OP-TEE binray are
included in the FIP containers.
Signed-off-by: Patrick Delaunay's avatarPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard's avatarPatrice Chotard <patrice.chotard@foss.st.com>
parent f91783ed
......@@ -15,13 +15,17 @@
config {
u-boot,boot-led = "heartbeat";
u-boot,error-led = "error";
u-boot,mmc-env-partition = "ssbl";
u-boot,mmc-env-partition = "fip";
st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
#ifdef CONFIG_STM32MP15x_STM32IMAGE
config {
u-boot,mmc-env-partition = "ssbl";
};
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
......
......@@ -15,12 +15,16 @@
config {
u-boot,boot-led = "heartbeat";
u-boot,error-led = "error";
u-boot,mmc-env-partition = "ssbl";
u-boot,mmc-env-partition = "fip";
st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
#ifdef CONFIG_STM32MP15x_STM32IMAGE
config {
u-boot,mmc-env-partition = "ssbl";
};
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
......
......@@ -8,18 +8,22 @@ config CMD_STBOARD
config MTDPARTS_NAND0_BOOT
string "mtd boot partitions for nand0"
default "2m(fsbl),2m(ssbl1),2m(ssbl2)"
default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || \
!TFABOOT
default "2m(fsbl),4m(fip1),4m(fip2)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
help
This define the partitions of nand0 used to build mtparts dynamically
for boot from nand0.
Each partition need to be aligned with the device erase block size,
512KB is the max size for the NAND supported by stm32mp1 platform.
The fsbl partition support multiple copy of the same binary, one by
erase block.
config MTDPARTS_NAND0_TEE
string "mtd tee partitions for nand0"
default "512k(teeh),512k(teed),512k(teex)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from nand0.
......@@ -28,7 +32,9 @@ config MTDPARTS_NAND0_TEE
config MTDPARTS_NOR0_BOOT
string "mtd boot partitions for nor0"
default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)"
default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" if STM32MP15x_STM32IMAGE || \
!TFABOOT
default "256k(fsbl1),256k(fsbl2),4m(fip),512k(u-boot-env)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
help
This define the partitions of nand0 used to build mtparts dynamically
......@@ -40,24 +46,27 @@ config MTDPARTS_NOR0_BOOT
config MTDPARTS_NOR0_TEE
string "mtd tee partitions for nor0"
default "256k(teeh),512k(teed),256k(teex)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from nor0.
config MTDPARTS_SPINAND0_BOOT
string "mtd boot partitions for spi-nand0"
default "2m(fsbl),2m(ssbl1),2m(ssbl2)"
default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || !TFABOOT
default "2m(fsbl),4m(fip1),4m(fip2)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
help
This define the partitions of nand0 used to build mtparts dynamically
for boot from spi-nand0,
512KB is the max size for the NAND supported by stm32mp1 platform.
The fsbl partition support multiple copy of the same binary, one by
erase block.
config MTDPARTS_SPINAND0_TEE
string "mtd tee partitions for spi-nand0"
default "512k(teeh),512k(teed),512k(teex)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from spi-nand0,
......
......@@ -11,7 +11,9 @@
#include <log.h>
#include <mtd.h>
#include <mtd_node.h>
#ifdef CONFIG_STM32MP15x_STM32IMAGE
#include <tee.h>
#endif
#include <asm/arch/stm32prog.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
......@@ -31,7 +33,9 @@ static void board_set_mtdparts(const char *dev,
char *mtdids,
char *mtdparts,
const char *boot,
#ifdef CONFIG_STM32MP15x_STM32IMAGE
const char *tee,
#endif
const char *user)
{
/* mtdids: "<dev>=<dev>, ...." */
......@@ -55,10 +59,12 @@ static void board_set_mtdparts(const char *dev,
strncat(mtdparts, ",", MTDPARTS_LEN);
}
#ifdef CONFIG_STM32MP15x_STM32IMAGE
if (tee) {
strncat(mtdparts, tee, MTDPARTS_LEN);
strncat(mtdparts, ",", MTDPARTS_LEN);
}
#endif
strncat(mtdparts, user, MTDPARTS_LEN);
}
......@@ -70,7 +76,10 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
static char parts[3 * MTDPARTS_LEN + 1];
static char ids[MTDIDS_LEN + 1];
static bool mtd_initialized;
bool tee, nor, nand, spinand, serial;
bool nor, nand, spinand, serial;
#ifdef CONFIG_STM32MP15x_STM32IMAGE
bool tee = false;
#endif
if (mtd_initialized) {
*mtdids = ids;
......@@ -78,7 +87,6 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
return;
}
tee = false;
nor = false;
nand = false;
spinand = false;
......@@ -89,7 +97,9 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
case BOOT_SERIAL_USB:
serial = true;
if (CONFIG_IS_ENABLED(CMD_STM32PROG)) {
#ifdef CONFIG_STM32MP15x_STM32IMAGE
tee = stm32prog_get_tee_partitions();
#endif
nor = stm32prog_get_fsbl_nor();
}
nand = true;
......@@ -108,9 +118,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
break;
}
#ifdef CONFIG_STM32MP15x_STM32IMAGE
if (!serial && CONFIG_IS_ENABLED(OPTEE) &&
tee_find_device(NULL, NULL, NULL, NULL))
tee = true;
#endif
memset(parts, 0, sizeof(parts));
memset(ids, 0, sizeof(ids));
......@@ -125,10 +137,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (nand) {
mtd = get_mtd_device_nm("nand0");
if (!IS_ERR_OR_NULL(mtd)) {
const char *mtd_tee = CONFIG_MTDPARTS_NAND0_TEE;
board_set_mtdparts("nand0", ids, parts,
CONFIG_MTDPARTS_NAND0_BOOT,
!nor && tee ? mtd_tee : NULL,
#ifdef CONFIG_STM32MP15x_STM32IMAGE
!nor && tee ? CONFIG_MTDPARTS_NAND0_TEE : NULL,
#endif
"-(UBI)");
put_mtd_device(mtd);
}
......@@ -137,10 +150,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (spinand) {
mtd = get_mtd_device_nm("spi-nand0");
if (!IS_ERR_OR_NULL(mtd)) {
const char *mtd_tee = CONFIG_MTDPARTS_SPINAND0_TEE;
board_set_mtdparts("spi-nand0", ids, parts,
CONFIG_MTDPARTS_SPINAND0_BOOT,
!nor && tee ? mtd_tee : NULL,
#ifdef CONFIG_STM32MP15x_STM32IMAGE
!nor && tee ? CONFIG_MTDPARTS_SPINAND0_TEE : NULL,
#endif
"-(UBI)");
put_mtd_device(mtd);
}
......@@ -148,10 +162,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (nor) {
if (!uclass_get_device(UCLASS_SPI_FLASH, 0, &dev)) {
const char *mtd_tee = CONFIG_MTDPARTS_NOR0_TEE;
board_set_mtdparts("nor0", ids, parts,
CONFIG_MTDPARTS_NOR0_BOOT,
tee ? mtd_tee : NULL,
#ifdef CONFIG_STM32MP15x_STM32IMAGE
tee ? CONFIG_MTDPARTS_NOR0_TEE : NULL,
#endif
"-(nor_user)");
}
}
......
......@@ -5,6 +5,7 @@ T: git https://source.denx.de/u-boot/custodians/u-boot-stm.git
S: Maintained
F: arch/arm/dts/stm32mp15*
F: board/st/stm32mp1/
F: configs/stm32mp15_defconfig
F: configs/stm32mp15_basic_defconfig
F: configs/stm32mp15_trusted_defconfig
F: include/configs/stm32mp1.h
CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
CONFIG_TFABOOT=y
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_SYS_MEMTEST_START=0xc0000000
CONFIG_SYS_MEMTEST_END=0xc4000000
CONFIG_ENV_OFFSET=0x480000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
CONFIG_TARGET_ST_STM32MP15x=y
CONFIG_CMD_STM32KEY=y
CONFIG_CMD_STM32PROG=y
CONFIG_ENV_OFFSET_REDUND=0x4C0000
CONFIG_TYPEC_STUSB160X=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_PROMPT="STM32MP> "
CONFIG_CMD_ADTIMG=y
CONFIG_CMD_ERASEENV=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_UNZIP=y
CONFIG_CMD_ADC=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_TIME=y
CONFIG_CMD_RNG=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_LOG=y
CONFIG_CMD_UBI=y
CONFIG_OF_LIVE=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_IS_IN_UBI=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_UBI_PART="UBI"
CONFIG_ENV_UBI_VOLUME="uboot_config"
CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=-1
CONFIG_STM32_ADC=y
CONFIG_CLK_SCMI=y
CONFIG_SET_DFU_ALT_INFO=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
CONFIG_FASTBOOT_BUF_SIZE=0x02000000
CONFIG_FASTBOOT_USB_DEV=1
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
CONFIG_FASTBOOT_MMC_BOOT1_NAME="mmc1boot0"
CONFIG_FASTBOOT_MMC_BOOT2_NAME="mmc1boot1"
CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
CONFIG_FASTBOOT_MMC_USER_NAME="mmc1"
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y
CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y
CONFIG_GPIO_HOG=y
CONFIG_DM_HWSPINLOCK=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_STM32_IPCC=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_SYS_MTDPARTS_RUNTIME=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_STM32_FMC2=y
CONFIG_MTD_SPI_NAND=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH=y
CONFIG_DWC_ETH_QOS=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_STMFX=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_STPMIC1=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_REMOTEPROC_STM32_COPRO=y
CONFIG_RESET_SCMI=y
CONFIG_DM_RNG=y
CONFIG_RNG_STM32MP1=y
CONFIG_DM_RTC=y
CONFIG_RTC_STM32=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_STM32_SPI=y
CONFIG_TEE=y
CONFIG_OPTEE=y
# CONFIG_OPTEE_TA_AVB is not set
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_DM_VIDEO=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
CONFIG_VIDEO_STM32=y
CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=1280
CONFIG_VIDEO_STM32_MAX_YRES=800
CONFIG_VIDEO_BMP_RLE8=y
CONFIG_BMP_16BPP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
CONFIG_WDT=y
CONFIG_WDT_STM32MP=y
CONFIG_ERRNO_STR=y
CONFIG_FDT_FIXUP_PARTITIONS=y
# CONFIG_LMB_USE_MAX_REGIONS is not set
CONFIG_LMB_MEMORY_REGIONS=2
CONFIG_LMB_RESERVED_REGIONS=16
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment