Commit 89394047 authored by wdenk's avatar wdenk

* Patch by Martin Krause, 03 Aug 2004:

  change timing for SM501 graphics controller on TQM5200 module

* Patch by Mark Jonas, 13 July 2004:
  - Total5200 LCD now run in little endian mode. Endianess conversion
    is done in hardware.
  - Removed last reference to "console" environment variable.
parent 429168ea
......@@ -2,6 +2,14 @@
Changes since U-Boot 1.1.1:
======================================================================
* Patch by Martin Krause, 03 Aug 2004:
change timing for SM501 graphics controller on TQM5200 module
* Patch by Mark Jonas, 13 July 2004:
- Total5200 LCD now run in little endian mode. Endianess conversion
is done in hardware.
- Removed last reference to "console" environment variable.
* Patches by Lars Munch, 12 Jul 2004:
- move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
board specific
......
......@@ -249,6 +249,21 @@ icecube_5100_config: unconfig
}
@./mkconfig -a IceCube ppc mpc5xxx icecube
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
@ >include/config.h
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
echo "... DDR memory revision" ; \
}
@[ -z "$(findstring ROMBOOT,$@)" ] || \
{ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
echo "... booting from 8-bit flash" ; \
}
@./mkconfig -a PM520 ppc mpc5xxx pm520
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
......@@ -283,30 +298,15 @@ Total5200_Rev2_lowboot_config: unconfig
}
@./mkconfig -a Total5200 ppc mpc5xxx total5200
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
@ >include/config.h
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
echo "... DDR memory revision" ; \
}
@[ -z "$(findstring ROMBOOT,$@)" ] || \
{ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
echo "... booting from 8-bit flash" ; \
}
@./mkconfig -a PM520 ppc mpc5xxx pm520
TQM5200_AA_config \
TQM5200_AB_config \
TQM5200_AC_config \
MiniFAP_config: unconfig
@ >include/config.h
@[ -z "$(findstring Mini-FAP,$@)" ] || \
@[ -z "$(findstring MiniFAP,$@)" ] || \
{ echo "#define CONFIG_MINIFAP" >>include/config.h ; \
echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
echo "... TQM5200_AC on Mini-FAP" ; \
echo "... TQM5200_AC on MiniFAP" ; \
}
@[ -z "$(findstring AA,$@)" ] || \
{ echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \
......
......@@ -123,7 +123,9 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
/*****************************************************************************/
#ifdef CONFIG_VIDEO_SED13806
#ifndef CONFIG_TOTAL5200
#define VIDEO_FB_LITTLE_ENDIAN
#endif
#define VIDEO_HW_RECTFILL
#define VIDEO_HW_BITBLT
#endif
......
......@@ -36,9 +36,13 @@
#define writeByte(ptrReg,value) \
*(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value
#ifdef CONFIG_TOTAL5200
#define writeWord(ptrReg,value) \
(*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = value)
#else
#define writeWord(ptrReg,value) \
(*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00))
#endif
GraphicDevice sed13806;
......
......@@ -474,7 +474,7 @@
#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC)
#define CFG_CS1_START 0xE0000000
#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
#define CFG_CS1_CFG 0x0148FF70
#define CFG_CS1_CFG 0x8F48FF70
#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
#endif
......
......@@ -173,7 +173,6 @@
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
"bootfile=/tftpboot/MPC5200/uImage\0" \
"console=serial\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
......@@ -357,7 +356,7 @@
#define CFG_CS2_START CFG_LCD_BASE
#define CFG_CS2_SIZE 0x00400000 /* 4096 kB */
#define CFG_CS2_CFG 0x0032FD00 /* 50WS, MX, AL, AA, CE, AS_25, DS_16 */
#define CFG_CS2_CFG 0x0032FD0C /* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */
#if CONFIG_TOTAL5200_REV==1
# define CFG_CS3_START CFG_CPLD_BASE
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment