Commit 8c725b93 authored by stroese's avatar stroese

Coldfire MCF5249 support added

parent a20b27a3
......@@ -34,6 +34,10 @@
#endif
#ifdef CONFIG_M5249
#include <asm/m5249.h>
#endif
#ifdef CONFIG_M5272
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
......@@ -121,3 +125,22 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
return 0;
};
#endif
#ifdef CONFIG_M5249 /* test-only: todo... */
int checkcpu (void)
{
char buf[32];
printf ("CPU: MOTOROLA Coldfire MCF5249 at %s MHz\n", strmhz(buf, CFG_CLK));
return 0;
}
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
/* enable watchdog, set timeout to 0 and wait */
mbar_writeByte(MCFSIM_SYPCR, 0xc0);
while (1);
/* we don't return! */
return 0;
};
#endif
......@@ -34,7 +34,11 @@
#include <asm/immap_5282.h>
#endif
#ifdef CONFIG_M5272
#ifdef CONFIG_M5249
#include <asm/m5249.h>
#endif
#if defined(CONFIG_M5272)
/*
* Breath some life into the CPU...
*
......@@ -118,7 +122,7 @@ int cpu_init_r (void)
{
return (0);
}
#endif /* #ifdef CONFIG_M5272 */
#endif /* #if defined(CONFIG_M5272) */
#ifdef CONFIG_M5282
......@@ -142,3 +146,107 @@ int cpu_init_r (void)
return (0);
}
#endif
#if defined(CONFIG_M5249)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f (void)
{
#ifndef CFG_PLL_BYPASS
/*
* Setup the PLL to run at the specified speed
*
*/
volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
unsigned long pllcr;
#ifdef CFG_FAST_CLK
pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */
#else
pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */
#endif
cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */
mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */
mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */
pllcr ^= 0x00000001; /* Set pll bypass to 1 */
mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */
udelay(0x20); /* Wait for a lock ... */
#endif /* #ifndef CFG_PLL_BYPASS */
/*
* NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins
* (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
* which is their primary function.
* ~Jeremy
*/
mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC);
mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC);
mbar2_writeLong(MCFSIM_GPIO_EN, CFG_GPIO_EN);
mbar2_writeLong(MCFSIM_GPIO1_EN, CFG_GPIO1_EN);
mbar2_writeLong(MCFSIM_GPIO_OUT, CFG_GPIO_OUT);
mbar2_writeLong(MCFSIM_GPIO1_OUT, CFG_GPIO1_OUT);
/*
* dBug Compliance:
* You can verify these values by using dBug's 'ird'
* (Internal Register Display) command
* ~Jeremy
*
*/
mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */
mbar_writeByte(MCFSIM_SYPCR, 0x00);
mbar_writeByte(MCFSIM_SWIVR, 0x0f);
mbar_writeByte(MCFSIM_SWSR, 0x00);
mbar_writeLong(MCFSIM_IMR, 0xfffffbff);
mbar_writeByte(MCFSIM_SWDICR, 0x00);
mbar_writeByte(MCFSIM_TIMER1ICR, 0x00);
mbar_writeByte(MCFSIM_TIMER2ICR, 0x88);
mbar_writeByte(MCFSIM_I2CICR, 0x00);
mbar_writeByte(MCFSIM_UART1ICR, 0x00);
mbar_writeByte(MCFSIM_UART2ICR, 0x00);
mbar_writeByte(MCFSIM_ICR6, 0x00);
mbar_writeByte(MCFSIM_ICR7, 0x00);
mbar_writeByte(MCFSIM_ICR8, 0x00);
mbar_writeByte(MCFSIM_ICR9, 0x00);
mbar_writeByte(MCFSIM_QSPIICR, 0x00);
mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */
/* Setup interrupt priorities for gpio7 */
/* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */
/* IDE Config registers */
mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);
mbar2_writeLong(MCFSIM_IDECONFIG2, 0x00000000);
/*
* Setup chip selects...
*/
mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1);
mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1);
mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1);
mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0);
mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0);
mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0);
/* enable instruction cache now */
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r (void)
{
return (0);
}
#endif /* #if defined(CONFIG_M5249) */
......@@ -37,6 +37,10 @@
#include <asm/immap_5282.h>
#endif
#ifdef CONFIG_M5249
#include <asm/m5249.h>
#endif
#define NR_IRQS 31
......@@ -142,10 +146,11 @@ void int_handler (struct pt_regs *fp)
irq_vecs[vec -
vec_base].handler (irq_vecs[vec - vec_base].arg);
} else {
printf ("\nBogus External Interrupt Vector %ld\n", vec);
printf ("\nBogus External Interrupt Vector %d\n", vec);
}
}
#ifdef CONFIG_M5272
int interrupt_init (void)
{
......@@ -172,3 +177,12 @@ int interrupt_init (void)
return 0;
}
#endif
#ifdef CONFIG_M5249
int interrupt_init (void)
{
enable_interrupts ();
return 0;
}
#endif
......@@ -34,11 +34,19 @@
#include <asm/m5282.h>
#endif
#ifdef CONFIG_M5249
#include <asm/m5249.h>
#endif
#ifdef CONFIG_M5249
#define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a))
#else
#define DoubleClock(a) ((double)(CFG_CLK) / 32.0 / (double)(a))
#endif
void rs_serial_setbaudrate(int port,int baudrate)
{
#ifdef CONFIG_M5272
#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
volatile unsigned char *uartp;
double clock, fraction;
......
......@@ -32,6 +32,10 @@ int get_clocks (void)
DECLARE_GLOBAL_DATA_PTR;
gd->cpu_clk = CFG_CLK;
#ifdef CONFIG_M5249
gd->bus_clk = gd->cpu_clk / 2;
#else
gd->bus_clk = gd->cpu_clk;
#endif
return (0);
}
......@@ -110,13 +110,19 @@ _start:
movec %d0, %VBR
#endif
#ifdef CONFIG_M5272
#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */
move.c %d0, %MBAR
/*** The 5249 has MBAR2 as well ***/
#ifdef CFG_MBAR2
move.l #(CFG_MBAR2 + 1), %d0 /* Get MBAR2 address */
movec %d0, #0xc0e /* Set MBAR2 */
#endif
move.l #(CFG_INIT_RAM_ADDR + 1), %d0
movec %d0, %RAMBAR0
#endif
#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */
#ifdef CONFIG_M5282
/* Initialize IPSBAR */
......@@ -287,6 +293,28 @@ icache_enable:
rts
#endif
#ifdef CONFIG_M5249
.globl icache_enable
icache_enable:
/*
* Note: The 5249 Documentation doesn't give a bit position for CINV!
* From the 5272 and the 5307 documentation, I have deduced that it is
* probably CACR[24]. Should someone say something to Motorola?
* ~Jeremy
*/
move.l #0x01000000, %d0 /* Invalidate whole cache */
move.c %d0,%CACR
move.l #0xff00c000, %d0 /* Set FLASH cachable: always match (SM=0b10) */
move.c %d0, %ACR0
move.l #0x0000c000, %d0 /* Set SDRAM cachable: always match (SM=0b10) */
move.c %d0, %ACR1
move.l #0x90000200, %d0 /* Set cache enable cmd */
move.c %d0,%CACR
moveq #1, %d0
move.l %d0, icache_state
rts
#endif
.globl icache_disable
icache_disable:
move.l #0x00000100, %d0 /* Setup cache mask */
......@@ -307,6 +335,7 @@ icache_status:
icache_state:
.long 1
/*------------------------------------------------------------------------------*/
.globl version_string
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment