-
u-boot-stm32-20240119
Add CMDLINE dependecy for CMD_STM32KEY STM32MP1: --------- Set stdio to serial on DH STM32MP15xx DHSOM Fix reset for usart1 in scmi configuration STM32MP2: --------- Add BSEC and OTP support for STM32MP25 Fix CONFIG_STM32MP25X flag usage
-
u-boot-stm32-20231215
_ run savedefconfig on all STM32 defconfig STM32 MCU: _ Sync stm32f469-disco DT with Linux 6.5 _ rework ltdc node for stm32f769-disco _ clk: stm32f: Fix settings for LCD_CLK _ Support display on stm32f469-disco board STM32 MPU: _ stm32mp_dfu : Fix board_get_alt_info_mtd() _ stm32mp_dfu : Simplify MTD device parsing
-
u-boot-stm32-20231113
Introduce STM32MP2 SoCs family support Add STM32MP257F-EV1 board
-
u-boot-stm32-20231110
_ Fix compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS are enabled _ Fix issue following DT sync with kernel 6.3 for stm32mp15xx-ev1 and DHSOM SoM _ Enable TCP, IPv6, wget on DH STM32MP15 DHSOM _ Limit u-boot.itb size to 0x160000 bytes on DH STM32MP15 DHSOM _ Read auth stats and boot_partition from tamp
-
u-boot-stm32-20231004
STM32 MCU: _ alignment with kernel DT v6.5 for stm32f429 and stm32f746 _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco STM32 MPU: _ alignment with kernel DT v6.6-rc1 _ add RNG support for stm32mp13 _ add USB, USB boot and stm32prog command support for stm32mp13 _ add support of USART1 clock for stm32mp1 _ only print RAM and board code with SPL_DISPLAY_PRINT flag for stm32mp1 _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc for stm32mp15xx DHCOR
-
u-boot-stm32-20230825
Remove scmi-optee shmem for STM32MP15 and STM32MP13
-
u-boot-stm32-20230816
DHSOM: Power cycle Buck3 in reset DHCOM: Switch DWMAC RMII clock to MCO2 stm32f746: fix display pinmux stm32mp: psci: Inhibit PDDS because CSTBYDIS is set stm32mp1: DT alignment with v6.4 stm32mp1: add splashscreen with STMicroelectronics logo stm32mp1: clk: remove error for disabled clock in stm32mp1_clk_get_parent serial: stm32: Extend TC timeout
-
u-boot-stm32-20230616
serial: stm32: Fixes to avoid suprious characters Use U-Boot device tree to configure MTD partitions stm32mp13 and stm32mp15 boards stm32mp: stm32prog: Add support of ENV partition type config: stm32mp15: remove CONFIG_FASTBOOT_USB_DEV and CONFIG_FASTBOOT_CMD_OEM_FORMAT stm32: Add IWDG handling into PSCI suspend code stm32: Fix OF_LIST on DHCOR stm32: Add missing header for save_boot_params stm32: Use __section(".data") with dot in the section name on DHSOM stm32mp: soome changes and fixes for STM32MP13 and STM32MP15 boards dts: stm32mp: alignment with v6.3 dts: stm32f769-disco: remove the dsi_host node configs: stm32f746-disco: remove a useless comment
-
u-boot-stm32-20230419
configs: _ Add usb_pgood_delay for ST boards _ increase malloc size for pre-reloc for stm32mp15 _ Set CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=2s for stm32mp15 dts: _ Add QSPI support on STM32MP13x SoC family _ Add FMC support on STM32MP13x SoC family drivers/machine: _ pinctrl_stm32: Add slew rate support for stm32_pinctrl_get_pin_muxing() _ spi: stm32_qspi: Remove useless struct stm32_qspi_flash _ rawnand: stm32_fmc2: remove unsupported EDO mode _ stm32mp: fix various array bounds checks
-
u-boot-stm32-20230113
Add driver to manage onboard hub supplies Add calibration support for stm32-adc Linux kernel v6.1 DT synchronization for stm32mp151.dtsi stm32mp157a-dk1-scmi-u-boot.dtsi update Add support of OP-TEE and STM32MP13x in bsec driver ECDSA various fixes for stm32mp
-
u-boot-stm32-20230106
- stm32mp: Fix board_get_usable_ram_top(): workaround to avoid issue after the commit 777aaaa706b ("common/memsize.c: Fix get_effective_memsize() to check for overflow") because the effective DDR effective size is reduce by 4KiB and sometime the board hang on boot
-
u-boot-stm32-20221212
phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supply dm: pmic: ignore disabled node in pmic_bind_children
-
u-boot-stm32-20221207
- Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT DHSOM: - Enable assorted ST specific commands - Add version variable - Add boot counter STM32MP13: - Add sdmmc cd-gpios for STM32MP135F-DK - Add clock & reset support STM32 ADC: - Split channel init into several routines - Add support of generic channels binding
-
u-boot-stm32-20221018
- stm32mp: fix compilation issue with DEBUG_UART - DT update : - Remove buck3 regulator-always-on on AV96 - Enable btrfs support on DHSOM - Drop extra newline from AV96 U-Boot extras DT - Add DHCOR based Testbench board - Fix and expand PLL configuration comments - update SCMI dedicated file
-
u-boot-stm32-20220927
- Increase SYS_MALLOC_F_LEN for STM32 MCU's board - SPL fixes for STM32F7 MCUs - Device tree alignement with kernelv6.0-rc4 for MCU's board - Device tree alignement with kernelv6.0-rc3 for MPU's board - Update DDR node for STM32MP15 - Cleanup config file for STM32MP1 - Update for cmd_stm32key command - Fix compatible string to add partitions for STM32MP1 - Update for stm32programmer tool
-
u-boot-stm32-20220915
- Fixes on STM32 I2C drivers - Activate SCMI regulator for STM32MP15 defconfig, fix the usb start command for scmi device tree
-
u-boot-stm32-20220907
- simplify the STM32MP15x package parsing code - remove test on CONFIG_DM_REGULATOR in stm32mp1 board and enable CONFIG_DM_REGULATOR for stm32f769-disco - handle ck_usbo_48m clock provided by USBPHYC to fix the command 'usb start' after alignment with Linux kernel v5.19 DT (clocks = <&usbphyc>) - Fix SYS_HZ_CLOCK value for stih410-b2260 board - Switch STMM32MP15x DHSOM to FMC2 EBI driver - Remove hwlocks from pinctrl in STM32MP15x to avoid issue with kernel
-
u-boot-stm32-20220712
- Alignment with Linux kernel device tree v5.19 for stm32mp15 and stm32mp13 - Add OP-TEE nodes for stm32mp13x, alligned with upstreamed OP-TEE - Introduce of_to_plat ops in stm32_sdmmc2 driver - Activate more features in stm32mp13 defconfig and support of STM32MP13x Rev.Y - Drop fastboot and stm32prog trigger gpios on STM32MP15x DHCOM board
-
u-boot-stm32-20220620
- Add STM32MP13 SoCs support with associated board STM32M135F-DK - Correct livetree support in stm32mp1 boards - Activate livetree for stm32mp15 DHSOM boards
-
u-boot-stm32-20220617
- Fix the stm32prog command for stm32mp platform - Add stm32mp15x DHCOR based DRC Compact board