- 08 Feb, 2021 40 commits
-
-
Pine H64 and Orange Pi 3 both provide a USB3 type A port. Enable it in U-Boot. Signed-off-by:Samuel Holland <samuel@sholland.org>
-
Some platforms, like the Allwinner H6, do not have a separate glue layer around the dwc3. Instead, they rely on the clocks/resets/phys referenced from the dwc3 DT node itself. Add support for enabling the clocks/resets referenced from the dwc3 DT node. Signed-off-by: -
Resetting an XHCI controller inside xhci_register undoes any register setup performed by the platform driver. And at least on the Allwinner H6, resetting the XHCI controller also resets the PHY, which prevents the controller from working. That means the controller must be taken out of reset before initializing the PHY, which must be done before calling xhci_register. The logic in the XHCI core was added to support the Raspberry Pi 4 (although this was not mentioned in the commit log!), which uses the xhci-pci platform driver. Move the reset logic to the platform driver, where it belongs, and where it cannot interfere with other platform drivers. Fixes: 0b80371b ("usb: xhci: Add reset controller support") Signed-off-by:
-
This driver is needed for XHCI to work on the Allwinner H6 SoC. The driver is copied from Linux v5.10. Signed-off-by: -
The XHCI controller has its own clock and reset. Add them. Signed-off-by: -
The 32kHz clock ("LOSC") on sunxi SoCs is provided by the RTC. It is used, among other things, by the XHCI controller in the H6. To be able to call clk_get_bulk() on the XHCI controller, some device needs to provide all referenced clocks. Since LOSC is a fixed-rate always-on clock, implementation is trivial. Signed-off-by: -
git://git.denx.de/u-boot-marvellTom Rini authored
- Espressobin: Set default env values at runtime (Pali) - Espressobin: Set the maximum slave SPI speed to 40MHz (Pali) - theadorable: PCIe test code enhancement and early deemphasis enabling (Stefan) - pci_mvebu: Disable config access to PCI host bridge ports (Stefan) - mv_sdhci: parse device-tree entry (Baruch)
-
git://git.denx.de/u-boot-fsl-qoriqTom Rini authored
Layerscape: Enable gpio Bug fixes & updates related to dspi, qspi, pciep, SVR mask, stream-id, env variables, mdio for LAyerscape Platforms Add SATA, network variant 1, 2 support on sl28 powerpc: T1042: drop CONFIG_VIDEO, Add kmcent2 board supporrt, keymile Bug fixes and updates for keymile, Kontron
-
-
git://git.denx.de/u-boot-usbTom Rini authored
-
Enable CMD_GPIO for board lx2160aqds Signed-off-by:
Biwen Li <biwen.li@nxp.com> Reviewed-by:
Priyanka Jain <priyanka.jain@nxp.com>
-
Enable CMD_GPIO for board lx2160ardb Signed-off-by:
-
Enable DM_GPIO and CMD_GPIO for board ls1088ardb Signed-off-by:
-
Enable DM_GPIO and CMD_GPIO for board ls1088aqds Signed-off-by:
-
Enable CMD_GPIO for board ls2088aqds Signed-off-by:
-
Enable DM_GPIO and CMD_GPIO for board ls2088ardb Signed-off-by:
-
Enable CMD_GPIO for board ls1046aqds Signed-off-by:
-
Enable CMD_GPIO for board ls1046ardb Signed-off-by:
-
Enable CMD_GPIO for board ls1043ardb Signed-off-by:
-
Enable CMD_GPIO for board ls1043aqds Signed-off-by:
-
Enable CMD_GPIO for board ls1028ardb Signed-off-by:
-
Enable CMD_GPIO for board ls1028aqds Signed-off-by:
-
Enable CMD_GPIO for ls1021atwr Signed-off-by:
-
Enable CMD_GPIO for board ls1021aqds Signed-off-by:
-
Enable CMD_GPIO for ls1012ardb Signed-off-by:
-
Enable CMD_GPIO for ls1012afrwy Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for board ls1021aqds Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for board ls1021atwr Signed-off-by:
-
Enable MPC8XXX_GPIO for SoC LS1046A Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for SoC LX2160A Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for LS208xA Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for LS1088A Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1028A Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1043A Signed-off-by:
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1012A Signed-off-by:
-
Add gpio node for SoC LS208xA Signed-off-by:
-
Add gpio node for SoC LS1088A Signed-off-by:
-
Add gpio node for SoC LS1046A Signed-off-by:
-
Add gpio node for SoC LS1043A Signed-off-by:
-
Add gpio node for SoC LS1028A Signed-off-by:
-
