Commit 54a78cbd authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Peng Fan
Browse files

mmc: sdhci-cadence: send tune request twice to work around errata

Cadence sent out an errata report to their customers of this IP.
This errata is not so severe, but the tune request should be sent
twice to avoid the potential issue.

Quote from the report:

Problem Summary
The IP6116 SD/eMMC PHY design has a timing issue on receive data path.
This issue may lead to an incorrect values of read/write pointers of
the synchronization FIFO. Such a situation can happen at the SDR104
and HS200 tuning procedure when the PHY is requested to change a phase
of sampling clock when moving to the next tuning iteration.

The following are valid workarounds to resolve the issue:

1. In eMMC mode, software sends tune request twice instead of once at
   each iteration. This means that the clock phase is not changed on
   the second request so there is no potential for clock instability.
2. In SD mode, software must not use the hardware tuning and instead
   perform an almost identical procedure to eMMC, using the HRS34 Tune
   Force register.

Signed-off-by: Masahiro Yamada's avatarMasahiro Yamada <>
parent 4af66596
......@@ -171,6 +171,7 @@ static int sdhci_cdns_set_tune_val(struct sdhci_cdns_plat *plat,
void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS06;
u32 tmp;
int i, ret;
return -EINVAL;
......@@ -178,11 +179,23 @@ static int sdhci_cdns_set_tune_val(struct sdhci_cdns_plat *plat,
tmp = readl(reg);
writel(tmp, reg);
return readl_poll_timeout(reg, tmp, !(tmp & SDHCI_CDNS_HRS06_TUNE_UP),
* Workaround for IP errata:
* The IP6116 SD/eMMC PHY design has a timing issue on receive data
* path. Send tune request twice.
for (i = 0; i < 2; i++) {
writel(tmp, reg);
ret = readl_poll_timeout(reg, tmp,
!(tmp & SDHCI_CDNS_HRS06_TUNE_UP), 1);
if (ret)
return ret;
return 0;
static int __maybe_unused sdhci_cdns_execute_tuning(struct udevice *dev,
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment