Commit 89ad7be8 authored by Prabhakar Kushwaha's avatar Prabhakar Kushwaha Committed by York Sun
Browse files

Makefile: Add support of CONFIG_SPL_FSL_PBL

Objective of this target to have concatenate binary having
 - SPL binary in PBL command format
 - U-boot binary
Signed-off-by: default avatarPrabhakar Kushwaha <>
Reviewed-by: default avatarYork Sun <>
parent 1eaa742d
......@@ -740,7 +740,11 @@ ALL-y += u-boot.srec u-boot.bin
ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
ifeq ($(CONFIG_SPL_FSL_PBL),y)
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
......@@ -925,6 +929,21 @@ endif
u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
$(call if_changed,cat)
#Add a target to create boot binary having SPL binary in PBI format
#concatenated with u-boot binary. It is need by PowerPC SoC having
#internal SRAM <= 512KB.
MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
$(call if_changed,pad_cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector
# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
# and need to introduce a new build target with the full blown U-Boot
......@@ -505,6 +505,10 @@ The following options need to be configured:
PBI commands can be used to configure SoC before it starts the execution.
Please refer doc/README.pblimage for more details
It adds a target to create boot binary having SPL binary in PBI format
concatenated with u-boot binary.
Defines the DDR controller register space as Big Endian
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment