* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)

* Add support for MGT5100 and MPC5200 processors

CHANGELOG

+======================================================================
+Changes for U-Boot 0.4.4:
+======================================================================
+
+* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
+
+* Add support for MGT5100 and MPC5200 processors
+
+* Patch by Lutz Dennig, 15 Jul 2003:
+  update for R360MPI board
+
 ======================================================================
 Changes for U-Boot 0.4.3:
 ======================================================================
 
 * Patches by Kshitij, 04 Jul 2003
-  - added support for arm925t cpu core 
+  - added support for arm925t cpu core
   - added support for TI OMAP 1510 Innovator Board
 
 * Patches by Martin Krause, 14 Jul 2003:
@@ -24,7 +35,7 @@ Changes for U-Boot 0.4.3:
   - Fix PCI config table for A3000
   - Fix iobase for natsemi.c
     (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
-	
+
 * Allow to enable "slow" POST routines by key press on power-on
 * Fix temperature dependend switching of LCD backlight on LWMON
 * Tweak output format for LWMON

MAINTAINERS

@@ -52,6 +52,8 @@ Wolfgang Denk <wd@denx.de>
 	FPS850L			MPC850
 	FPS860L			MPC860
 	ICU862			MPC862
+	IceCube_5100		MGT5100
+	IceCube_5200		MPC5200
 	IP860			MPC860
 	IVML24			MPC860
 	IVML24_128		MPC860

MAKEALL

@@ -18,6 +18,14 @@ LIST_5xx="	\
 	cmi_mpc5xx							\
 "
 
+#########################################################################
+## MPC5xxx Systems
+#########################################################################
+
+LIST_5xxx="	\
+	IceCube_5100	IceCube_5200					\
+"
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -45,9 +53,9 @@ LIST_8xx="	\
 
 LIST_4xx="	\
 	ADCIOP		AR405		ASH405          BUBINGA405EP    \
-        CANBT		CPCI405		CPCI4052 	CPCI405AB       \
+	CANBT		CPCI405		CPCI4052 	CPCI405AB       \
 	CPCI440         CPCIISER4	CRAYL1  	DASA_SIM	\
-        DU405    	EBONY           ERIC  		EXBITGEN	\
+	DU405    	EBONY           ERIC  		EXBITGEN	\
 	MIP405  	MIP405T		ML2		OCRTC		\
 	ORSG		PCI405		PIP405		PMC405          \
 	W7OLMC		W7OLMG          WALNUT405			\
@@ -87,7 +95,8 @@ LIST_7xx="	\
 	BAB7xx		ELPPC						\
 "
 
-LIST_ppc="${LIST_5xx}  ${LIST_8xx}  \
+LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
+	  ${LIST_8xx}  \
 	  ${LIST_824x} ${LIST_8260} \
 	  ${LIST_4xx}		    \
 	  ${LIST_74xx} ${LIST_7xx}"
@@ -159,7 +168,7 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	5xx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|pxa|mips|I486|x86)
+	5xx|5xxx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|pxa|mips|I486|x86)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}

Makefile

@@ -181,6 +181,22 @@ unconfig:
 cmi_mpc5xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx cmi
 
+#########################################################################
+## MPC5xxx Systems
+#########################################################################
+IceCube_5200_config	\
+IceCube_5100_config:		unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _5200,$@)" ] || \
+		{ echo "#define CONFIG_MPC5200"		>>include/config.h ; \
+		  echo "... with MPC5200 processor" ; \
+		}
+	@[ -z "$(findstring _5100,$@)" ] || \
+		{ echo "#define CONFIG_MGT5100"		>>include/config.h ; \
+		  echo "... with MGT5100 processor" ; \
+		}
+	@./mkconfig -a IceCube ppc mpc5xxx icecube
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################

README

@@ -206,7 +206,7 @@ Directory Hierarchy:
 - board/mvs1	Files specific to MVS1       boards
 - board/nx823   Files specific to NX823      boards
 - board/oxc	Files specific to OXC        boards
-- board/omap1510inn  
+- board/omap1510inn
 		Files specific to OMAP 1510 Innovator boards
 - board/pcippc2	Files specific to PCIPPC2/PCIPPC6 boards
 - board/pm826	Files specific to PM826      boards
@@ -913,35 +913,35 @@ The following options need to be configured:
 - I2C Support:	CONFIG_HARD_I2C | CONFIG_SOFT_I2C
 
 		These enable I2C serial bus commands. Defining either of
-		(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will 
-		include the appropriate I2C driver for the selected cpu. 
+		(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
+		include the appropriate I2C driver for the selected cpu.
 
-		This will allow you to use i2c commands at the u-boot 
-		command line (as long as you set CFG_CMD_I2C in 
+		This will allow you to use i2c commands at the u-boot
+		command line (as long as you set CFG_CMD_I2C in
 		CONFIG_COMMANDS) and communicate with i2c based realtime
 		clock chips. See common/cmd_i2c.c for a description of the
 		command line interface.
 
-		CONFIG_HARD_I2C	selects the CPM hardware driver for I2C. 
+		CONFIG_HARD_I2C	selects the CPM hardware driver for I2C.
 
-		CONFIG_SOFT_I2C configures u-boot to use a software (aka 
+		CONFIG_SOFT_I2C configures u-boot to use a software (aka
 		bit-banging) driver instead of CPM or similar hardware
 		support for I2C.
 
-		There are several other quantities that must also be 
+		There are several other quantities that must also be
 		defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
 
 		In both cases you will need to define CFG_I2C_SPEED
-		to be the frequency (in Hz) at which you wish your i2c bus 
-		to run and CFG_I2C_SLAVE to be the address of this node (ie 
-		the cpu's i2c node address). 
-		
+		to be the frequency (in Hz) at which you wish your i2c bus
+		to run and CFG_I2C_SLAVE to be the address of this node (ie
+		the cpu's i2c node address).
+
 		Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c)
 		sets the cpu up as a master node and so its address should
 		therefore be cleared to 0 (See, eg, MPC823e User's Manual
-		p.16-473). So, set CFG_I2C_SLAVE to 0.  
+		p.16-473). So, set CFG_I2C_SLAVE to 0.
 
-		That's all that's required for CONFIG_HARD_I2C. 
+		That's all that's required for CONFIG_HARD_I2C.
 
 		If you use the software i2c interface (CONFIG_SOFT_I2C)
 		then the following macros need to be defined (examples are
@@ -999,15 +999,15 @@ The following options need to be configured:
 
 		eg: #define I2C_SCL(bit) \
 		         if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
-		         else    immr->im_cpm.cp_pbdat &= ~PB_SCL 
+		         else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 
 		I2C_DELAY
 
 		This delay is invoked four times per clock cycle so this
 		controls the rate of data transfer.  The data rate thus
 		is 1 / (I2C_DELAY * 4). Often defined to be something
-		like: 
-		
+		like:
+
 		#define I2C_DELAY  udelay(2)
 
 		CFG_I2C_INIT_BOARD
@@ -1862,7 +1862,7 @@ configurations; the following names are supported:
     GENIETV_config	  TQM823L_config	PIP405_config
     GEN860T_config	  EBONY_config		FPS860L_config
     ELPT860_config	  cmi_mpc5xx_config	NETVIA_config
-    at91rm9200dk_config	  omap1510inn_config	
+    at91rm9200dk_config	  omap1510inn_config
 
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for

board/a3000/a3000.c

@@ -91,31 +91,31 @@ Done:
  */
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_a3000_config_table[] = {
-        /* vendor, device, class */
-        /* bus, dev, func */
+	/* vendor, device, class */
+	/* bus, dev, func */
 	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,	   /* dp83815 eth0 divice */
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,	/* dp83815 eth0 divice */
 	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
 				       PCI_ENET0_MEMADDR,
 				       PCI_COMMAND_IO |
 				       PCI_COMMAND_MEMORY |
 				       PCI_COMMAND_MASTER }},
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_ANY_ID, 0x14, PCI_ANY_ID,         /* PCI slot1 */
+	  PCI_ANY_ID, 0x14, PCI_ANY_ID,		/* PCI slot1 */
 	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
 				       PCI_ENET1_MEMADDR,
 				       PCI_COMMAND_IO |
 				       PCI_COMMAND_MEMORY |
 				       PCI_COMMAND_MASTER }},
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_ANY_ID, 0x15, PCI_ANY_ID,         /* PCI slot2 */
+	  PCI_ANY_ID, 0x15, PCI_ANY_ID, 	/* PCI slot2 */
 	  pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
 				       PCI_ENET2_MEMADDR,
 				       PCI_COMMAND_IO |
 				       PCI_COMMAND_MEMORY |
 				       PCI_COMMAND_MASTER }},
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_ANY_ID, 0x16, PCI_ANY_ID,         /* PCI slot3 */
+	  PCI_ANY_ID, 0x16, PCI_ANY_ID,		/* PCI slot3 */
 	  pci_cfgfunc_config_device, { PCI_ENET3_IOADDR,
 				       PCI_ENET3_MEMADDR,
 				       PCI_COMMAND_IO |

board/exbitgen/flash.c

@@ -217,7 +217,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	short i;
 	FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
 
 	/* Write auto select command: read Manufacturer ID */
 	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
@@ -247,7 +247,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 	switch (value) {
 	case (FLASH_WORD_SIZE)AMD_ID_F040B:
-	        info->flash_id += FLASH_AM040;
+		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000; /* => 512 ko */
 		break;
@@ -335,14 +335,14 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	}
 
 	/* set up sector start address table */
-        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
 		(info->flash_id  == FLASH_AM040) ||
 		(info->flash_id == FLASH_AMDLV033C) ||
 		(info->flash_id == FLASH_AMDLV065D)) {
 		ulong sectsize = info->size / info->sector_count;
 		for (i = 0; i < info->sector_count; i++)
 			info->start[i] = base + (i * sectsize);
-        } else {
+	} else {
 	    if (info->flash_id & FLASH_BTYPE) {
 		/* set sector offsets for bottom boot block type	*/
 		info->start[0] = base + 0x00000000;
@@ -370,9 +370,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		/* D0 = 1 if protected */
 
 		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-                if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
 			info->protect[i] = 0;
-                else
+		else
 			info->protect[i] = addr2[2] & 1;
 	}
 
@@ -450,7 +450,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			while ((addr2[0] & 0x00800080) !=
 				(FLASH_WORD_SIZE) 0x00800080) {
 				if ((now=get_timer(start)) >
-				           CFG_FLASH_ERASE_TOUT) {
+					   CFG_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					addr[0] = (FLASH_WORD_SIZE)0x00F000F0;
 					return 1;
@@ -551,12 +551,12 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
-        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
-        volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
-        volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
-        int i;
+	int i;
 
 	/* Check if Flash is (sufficiently) erased */
 	if ((*((volatile ulong *)dest) & data) != data) {
@@ -565,7 +565,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		return 2;
 	}
 
-        for (i=0; i < 4/sizeof(FLASH_WORD_SIZE); i++) {
+	for (i=0; i < 4/sizeof(FLASH_WORD_SIZE); i++) {
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 

board/exbitgen/u-boot.lds

@@ -98,7 +98,7 @@ SECTIONS
   PROVIDE (erotext = .);
   .reloc   :
   {
-    *(.got) 
+    *(.got)
     _GOT2_TABLE_ = .;
     *(.got2)
     _FIXUP_TABLE_ = .;

board/gen860t/gen860t.c

@@ -303,7 +303,7 @@ board_poweroff(void)
 }
 
 #ifdef CONFIG_POST
-/* 
+/*
  * Returns 1 if keys pressed to start the power-on long-running tests
  * Called from board_init_f().
  */

board/icecube/Makefile

+
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/icecube/config.mk

+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# IceCube board
+#
+
+TEXT_BASE = 0xfff00000
+# TEXT_BASE = 0x00100000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board

board/icecube/flash.c

+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
+ *        has nothing to do with the flash chip being 8-bit or 16-bit.
+ */
+#ifdef CONFIG_FLASH_16BIT
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+#define	FLASH_ID_MASK	0xFFFF
+#else
+typedef unsigned char FLASH_PORT_WIDTH;
+typedef volatile unsigned char FLASH_PORT_WIDTHV;
+#define	FLASH_ID_MASK	0xFF
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+#define FLASH_CYCLE1	0x0555
+#define FLASH_CYCLE2	0x02aa
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(FPWV *addr, flash_info_t *info);
+static void flash_reset(flash_info_t *info);
+static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
+static flash_info_t *flash_get_info(ulong base);
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size = 0;
+	int i;
+	extern void flash_preinit(void);
+
+	flash_preinit();
+
+	/* Init: no FLASHes known */
+	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		ulong flashbase = CFG_FLASH_BASE;
+
+		memset(&flash_info[i], 0, sizeof(flash_info_t));
+
+		flash_info[i].size =
+			flash_get_size((FPW *)flashbase, &flash_info[i]);
+
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
+			i, flash_info[i].size);
+		}
+
+		size += flash_info[i].size;
+	}
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CFG_MONITOR_BASE));
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      flash_get_info(CFG_ENV_ADDR));
+#endif
+
+
+	return size ? size : 1;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_reset(flash_info_t *info)
+{
+	FPWV *base = (FPWV *)(info->start[0]);
+
+	/* Put FLASH back in read mode */
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
+	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
+		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+static flash_info_t *flash_get_info(ulong base)
+{
+	int i;
+	flash_info_t * info;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+		info = & flash_info[i];
+		if (info->start[0] <= base && base <= info->start[0] + info->size - 1)
+			break;
+	}
+
+	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info (flash_info_t *info)
+{
+	int i;
+	uchar *boottype;
+	uchar *bootletter;
+	uchar *fmt;
+	uchar botbootletter[] = "B";
+	uchar topbootletter[] = "T";
+	uchar botboottype[] = "bottom boot sector";
+	uchar topboottype[] = "top boot sector";
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("STM ");		break;
+	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	/* check for top or bottom boot, if it applies */
+	if (info->flash_id & FLASH_BTYPE) {
+		boottype = botboottype;
+		bootletter = botbootletter;
+	}
+	else {
+		boottype = topboottype;
+		bootletter = topbootletter;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMDLV065D:
+		fmt = "29LV065 (64 Mbit, uniform sectors)\n";
+		break;
+	default:
+		fmt = "Unknown Chip Type\n";
+		break;
+	}
+
+	printf (fmt, bootletter, boottype);
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20,
+		info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+ulong flash_get_size (FPWV *addr, flash_info_t *info)
+{
+	int i;
+	/* Write auto select command: read Manufacturer ID */
+	/* Write auto select command sequence and test FLASH answer */
+	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
+	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
+	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
+
+	/* The manufacturer codes are only 1 byte, so just use 1 byte.
+	 * This works for any bus width and any FLASH device width.
+	 */
+	udelay(100);
+	switch (addr[0] & 0xff) {