Commit a9046b9e authored by Wolfgang Denk's avatar Wolfgang Denk
Browse files

Prepare v2010-rc2


Signed-off-by: Wolfgang Denk's avatarWolfgang Denk <wd@denx.de>
parent f986325d
commit f986325dd569faeaec4186f678d113505c5c4828
Author: Ron Madrid <ron_madrid@sbcglobal.net>
Date: Tue Jun 1 17:00:49 2010 -0700
Update SICRL_USBDR to reflect 4 different settings
This patch changed the SICRL_USBDR define to reflect the 4 different bit
settings for this two-bit field. The four different options are '00', '01',
'10', and '11'. This patch also corrects the config file for SIMPC8313 and
MPC8313ERDB for the appropriate fields. This change only affects the MPC8313
cpu.
Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 3057c6be5efda781a72ca04432e0a4ed6e670030
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Fri Apr 23 12:20:11 2010 -0500
fdt_support: add entry for sec3.1 and fix sec3.3
Add sec3.1 h/w geometry for fdt node fixups.
Also, technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor
type, it lacks the ARC4 algorithm execution unit required to be able
to execute anything meaningful with it. Change the node to agree with
the documentation that declares that the sec3.3 really doesn't have such
a descriptor type.
Reported-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 5f4d36825a028e300b7d56a566d2cf84418b7a68
Author: Timur Tabi <timur@freescale.com>
Date: Thu May 20 11:16:16 2010 -0500
fsl: rename 'dma' to 'brdcfg1' in the ngPIXIS structure
The ngPIXIS is a board-specific FPGA, but the definition of the registers
is mostly consistent. On boards where it matter, register 9 is called
'brdcfg1' instead of 'dma', so rename the variable in the ngpixis_t
definition.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 6e37a044076896ba88b0d6316fadd492032c5193
Author: Timur Tabi <timur@freescale.com>
Date: Thu May 20 12:45:39 2010 -0500
fsl/85xx: add clkdvdr and pmuxcr2 to global utilities structure definition
Add the 'clkdvdr' and 'pmuxcr2' registers to the 85xx definition of
struct ccsr_gur.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 39c209546ab5b11ca6410c5cc57dcbf457e50800
Author: Tom <Tom@bumblecow.com>
Date: Fri May 28 13:23:16 2010 -0500
ARM Update mach-types
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php
And built with
repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
commit 3defb2476166445982a90c12d33f8947e75476c4
Signed-off-by: Tom <Tom@bumblecow.com>
commit 551bd947bd6f982fa38dde840576eba52346160c
Author: Tom <Tom@bumblecow.com>
Date: Sun May 9 16:58:11 2010 -0500
ARM Update mach-types
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php
And built with
repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
commit 257dab81413b31b8648becfe11586b3a41e5c29a
Signed-off-by: Tom <Tom@bumblecow.com>
commit 1117cbf2adac59050af1751af6c6a524afa5c3ef
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Fri May 28 10:56:50 2010 +0800
nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
commit 6803336c9f21ba428f5c1b1cf825bbbac0a762e5
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Fri May 21 11:08:02 2010 +0800
nios2: allow STANDALONE_LOAD_ADDR overriding
This patch allows users to override default STANDALONE_LOAD_ADDR.
The gcclibdir path was duplicated in the standalone Makefile and
can be removed.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
commit 8d52ea6db484c689a75ef8a36a4e525753b8f078
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Sat May 15 06:00:05 2010 +0800
nios2: fix div64 issue for gcc4
This patch fixes the run-time error on div64 when built with
gcc4, which was reported by jhwu0625 on nios forum. It merges
math support from libgcc of gcc4. This patch is copied from
nios2-linux.
It works with both gcc3 and gcc4. The old mult.c, divmod.c and
math.h are removed.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
commit 0df01fd3d71481b5cc7aeea6a741b9fc3be15178
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Fri May 21 11:08:03 2010 +0800
nios2: fix r15 issue for gcc4
The "-ffixed-r15" option doesn't work well for gcc4. Since we
don't use gp for small data with option "-G0", we can use gp
as global data pointer. This allows compiler to use r15. It
is necessary for gcc4 to work properly.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
commit 661ba14051db6766932fcb50ba1ec7c67f230054
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Fri Apr 30 11:34:16 2010 +0800
spi: add altera spi controller support
This patch adds the driver of altera spi controller, which is
used as epcs/spi flash controller. It also works with mmc_spi
driver.
This driver support more than one spi bus, with base list declared
#define CONFIG_SYS_ALTERA_SPI_LIST { BASE_0,BASE_1,... }
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
commit 1e8e9bad2db38e93c3bc9f4b6238b3d8be99e469
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Fri Apr 30 11:34:15 2010 +0800
nios2: add gpio support to nios2-generic board
This patch adds gpio support of Altera PIO component to the
nios2-generic board. Though it drives only gpio_led at the
moment, it supports bidirectional port to control bit-banging
I2C, NAND flash busy status or button switches, etc.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
commit 3e6b86b5552840bb4147871a753840eb3923374c
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Fri Apr 30 11:34:14 2010 +0800
misc: add gpio based status led driver
This patch adds a status led driver followed the GPIO access
conventions of Linux. The led mask is used to specify the gpio pin.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
commit cedd341d551b6b705e97ab1953a87575b9ff9ef9
Author: Thomas Chou <thomas@wytron.com.tw>
Date: Fri Apr 30 11:34:13 2010 +0800
nios2: add gpio support
This patch adds driver for a trivial gpio core, which is described
in http://nioswiki.com/GPIO. It is used for gpio led and nand flash
interface in u-boot.
When CONFIG_SYS_GPIO_BASE is not defined, board may provide
its own driver.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
commit adf55679af1ed98c15a136eb81d6204ebe740b30
Author: Wolfgang Wegner <w.wegner@astro-kom.de>
Date: Tue Mar 30 19:19:51 2010 +0100
add CONFIG_SYS_FEC_FULL_MII for MCF5445x
This patch adds support for full MII interface on MCF5445x (in contrast
to RMII as used on the evaluation boards).
Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
commit ae49099755affc942171a7727c1b12c51d167abf
Author: Wolfgang Wegner <w.wegner@astro-kom.de>
Date: Tue Mar 30 19:19:50 2010 +0100
add CONFIG_SYS_FEC_NO_SHARED_PHY for MCF5445x
This patch adds the possibility to handle seperate PHYs to MCF5445x.
Naming is chosen to resemble the contrary CONFIG_FEC_SHARED_PHY in the
linux kernel.
Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
commit e9b43cae1a20af13d1baeb13038b3f34905c14b5
Author: Wolfgang Wegner <w.wegner@astro-kom.de>
Date: Tue Mar 30 19:20:31 2010 +0100
add missing PCS3 for MCF5445x
This patch adds the code for handling PCS3 (DSPI chip select 3) in
cpu_init.c and m5445x.h
Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
commit d0fe1128c4451327b9cb0fac1a76efd194b078b5
Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Wed May 26 21:26:43 2010 +0400
USB: fix create_pipe()
create_pipe() can give wrong result if an expression is passed as the 'endpoint'
argument -- due to missing parentheses.
Thanks to Martin Mueller for finding the bug and providing the patch.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
commit c941b77adc40f344215e367b3d1fc638addff870
Author: Andrew Caldwell <Andrew.Caldwell@analog.com>
Date: Fri May 7 15:10:07 2010 -0400
Blackfin: nand: drain the write buffer before returning
The current Blackfin nand write function fills up the write buffer but
returns before it has had a chance to drain. On faster systems, this
isn't a problem as the operation finishes before the ECC registers are
read, but on slower systems the ECC may be incomplete when the core tries
to read it.
So wait for the buffer to drain once we're done writing to it.
Signed-off-by: Andrew Caldwell <Andrew.Caldwell@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
commit 01f03bda5b22e5aeae5f02fd537da97a41485c73
Author: Wolfgang Denk <wd@denx.de>
Date: Wed May 26 23:57:08 2010 +0200
Prepare v2010.06-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit c4976807cbbabd281f45466ac5e47e5639bcc9cb
Author: Wolfgang Denk <wd@denx.de>
Date: Wed May 26 23:51:22 2010 +0200
Coding style cleanup, update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit c7da8c19b5f7fd58b5b4b1d247648851af56e1f0
Author: Andreas Biessmann <andreas.devel@googlemail.com>
Date: Sat May 22 13:17:21 2010 +0200
......@@ -24,7 +24,7 @@
VERSION = 2010
PATCHLEVEL = 06
SUBLEVEL =
EXTRAVERSION = -rc1
EXTRAVERSION = -rc2
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
......
......@@ -143,9 +143,9 @@ Directory Hierarchy:
/cpu CPU specific files
/arm720t Files specific to ARM 720 CPUs
/arm920t Files specific to ARM 920 CPUs
/at91rm9200 Files specific to Atmel AT91RM9200 CPU
/imx Files specific to Freescale MC9328 i.MX CPUs
/s3c24x0 Files specific to Samsung S3C24X0 CPUs
/at91rm9200 Files specific to Atmel AT91RM9200 CPU
/imx Files specific to Freescale MC9328 i.MX CPUs
/s3c24x0 Files specific to Samsung S3C24X0 CPUs
/arm925t Files specific to ARM 925 CPUs
/arm926ejs Files specific to ARM 926 CPUs
/arm1136 Files specific to ARM 1136 CPUs
......@@ -2504,7 +2504,7 @@ to save the current settings.
I2C muxes, you can define here, how to reach this
EEPROM. For example:
#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
EEPROM which holds the environment, is reached over
a pca9547 i2c mux with address 0x70, channel 3.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment