1. 08 Mar, 2013 1 commit
    • Nikita Kiryanov's avatar
      lcd: add option for board specific splash screen preparation · 581bb419
      Nikita Kiryanov authored
      
      
      Currently there is no logical place to put the code that prepares the
      splash image data. The splash image data should be ready in memory
      before bmp_display() is called, and after the environment is ready
      (since lcd.c looks for the splash image in an address specified by
      the environment variable "splashimage").
      
      Our window of opportunity in board_init_r() is therefore: between
      env_relocate() and bmp_display(), and from the available options
      only the lcd related functions in drv_lcd_init() seem appropriate
      for such lcd oriented code.
      
      Add the option to prepare the splash image data in lcd_logo() right
      before it is sent to be displayed.
      
      Cc: Anatolij Gustschin <agust@denx.de>
      Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
      Signed-off-by: default avatarNikita Kiryanov <nikita@compulab.co.il>
      Signed-off-by: default avatarIgor Grinberg <grinberg@compulab.co.il>
      581bb419
  2. 15 Feb, 2013 2 commits
  3. 14 Jan, 2013 1 commit
  4. 10 Jan, 2013 5 commits
    • Javier Martinez Canillas's avatar
      serial/ns16550: add an option to avoid hanging on broken platforms · 7de0fe1a
      Javier Martinez Canillas authored
      
      
      Some platforms (e.g. IGEPv2 board) has a broken ns16550 UART that
      does not set the TEMT bit when the transmitter is empty in SPL.
      This makes U-Boot to hang while waiting for TEMT to be set.
      
      Add a new option to avoid this:
      
      CONFIG_SYS_NS16550_BROKEN_TEMT
      
      16550 UART set the Transmitter Empty (TEMT) Bit when all output
      has finished and the transmitter is totally empty. U-Boot waits
      for this bit to be set to initialize the serial console. On some
      broken platforms this bit is not set in SPL making U-Boot to
      hang while waiting for TEMT. Define this option to avoid it.
      Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
      7de0fe1a
    • Simon Glass's avatar
      Add option to display customised memory information · 15a33e49
      Simon Glass authored
      
      
      Some boards want to report more than just memory size. For example, it
      might be useful to display the memory type (DDR2, DDR3) or manufacturer.
      
      Add a weak function to support this requirement, accessed through a new
      'meminfo' command.
      
      Any example of the DRAM: output is below, just for illustration:
      
      SMDK5250 # meminfo
      DRAM:  2 GiB Elpida DDR3 @ 800MHz
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      15a33e49
    • Simon Glass's avatar
      arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCD · e2e3e2b1
      Simon Glass authored
      
      
      This option displays board info after stdio is running, so that it will
      appear on the LCD. If it is displayed earlier, the board info will appear
      on the serial console but not on the LCD.
      
      Here follows a blow-by-blow description.
      
      1a. Without CONFIG_DISPLAY_BOARDINFO_LATE, on serial:
      
      U-Boot 2011.12-02550-g037e1c5-dirty (Nov 15 2012 - 14:29:42) for SMDK5250
      
      CPU:   S5PC520 @ 1700MHz
      
      Board: Google Snow, rev 0
      I2C:   ready
      DRAM:  2 GiB Elpida DDR3 @ 800MHz
      MMC:   S5P MSHC0: 0, S5P MSHC1: 1
      SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
      *** Warning - bad CRC, using default environment
      
      In:    mkbp-keyb
      Out:   lcd
      Err:   lcd
      Net:   No ethernet found.
      Hit any key to stop autoboot:  0
      SMDK5250 #
      
      1b. Without CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info
      is missing):
      
      In:    mkbp-keyb
      Out:   lcd
      Err:   lcd
      Net:   No ethernet found.
      Hit any key to stop autoboot:  0
      SMDK5250 #
      
      2a. With CONFIG_DISPLAY_BOARDINFO_LATE, on serial:
      
      U-Boot 2011.12-02550-g037e1c5 (Nov 15 2012 - 14:27:40) for SMDK5250
      
      CPU:   S5PC520 @ 1700MHz
      I2C:   ready
      DRAM:  2 GiB Elpida DDR3 @ 800MHz
      MMC:   S5P MSHC0: 0, S5P MSHC1: 1
      SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
      *** Warning - bad CRC, using default environment
      
      Model: Google Snow
      In:    mkbp-keyb
      Out:   lcd
      Err:   lcd
      Net:   No ethernet found.
      Hit any key to stop autoboot:  0
      SMDK5250 #
      
      2b. With CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is present):
      
      Model: Google Snow
      In:    mkbp-keyb
      Out:   lcd
      Err:   lcd
      Net:   No ethernet found.
      Hit any key to stop autoboot:  0
      SMDK5250 #
      
      Since the LCD is all that a typical user sees, it is useful to display
      the model there.
      
      We may be able to rearrange things some other way one day, but at
      present this seems like a convenient way of getting the required
      behaviour.
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      e2e3e2b1
    • Simon Glass's avatar
      Document the CONFIG_DISPLAY_BOARDINFO option · b2b92f53
      Simon Glass authored
      
      
      Add a short note about this in the README.
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      b2b92f53
    • Simon Glass's avatar
      arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading · 06fd8538
      Simon Glass authored
      This option delays loading of the environment until later, so that only the
      default environment will be available to U-Boot.
      
      This can address the security risk of untrusted data being used during boot.
      
      Any time you load untrusted data you expose yourself to a bug in the
      code. The attacker gets to choose the data so can sometimes carefully
      craft it to exploit a bug. We try to avoid touching user-controlled
      data during a verified boot unless strictly necessary. Since the
      default environment is good enough in this case (or you would just
      change it), this gets around the problem by just not loading the
      environment.
      
      When CONFIG_DELAY_ENVIRONMENT is defined, it is convenient to have a
      run-time way of enabling loading of the environment. Add this to the
      fdt as /config/delay-environment.
      
      Note: This patch depends on http://patchwork.ozlabs.org/patch/194342/
      
      Signed-off-by: default avatarDoug Anderson <dianders@chromium.org>
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      Reviewed-by: default avatarDoug Anderson <dianders@chromium.org>
      06fd8538
  5. 19 Dec, 2012 3 commits
  6. 15 Dec, 2012 1 commit
  7. 13 Dec, 2012 5 commits
  8. 11 Dec, 2012 4 commits
    • Tom Wai-Hong Tam's avatar
      edid: Add I2C command for printing the EDID · 735987c5
      Tom Wai-Hong Tam authored
      
      
      Add a single command to read the EDID information over I2C.
      
      For example:
      
      SMDK5250 # i2c dev 7
      Setting bus to 7
      SMDK5250 # i2c edid 50
      EDID version: 1.4
      Product ID code: 305c
      Manufacturer: AUO
      Serial number: 00000000
      Manufactured in week: 0 year: 2011
      Video input definition: digital signal, voltage level 0, blank to black
      Monitor is non-RGB
      Maximum visible display size: 26 cm x 14 cm
      Power management features: no active off, no suspend, no standby
      Estabilished timings:
      Standard timings:
              1366x768        60 Hz (detailed)
              1366x768        60 Hz (detailed)
      Monitor ID: 2VD2K.B116XW
      Signed-off-by: default avatarTom Wai-Hong Tam <waihong@chromium.org>
      Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      735987c5
    • Simon Glass's avatar
      Add hash command to perform hashing using various algorithms · bf36c5d5
      Simon Glass authored
      
      
      This new command supports hashing SHA1 and SHA256. It could be extended
      to others such as MD5 and the CRC algorithms. The syntax is modeled on
      those:
      
         hash <algorithm> <address> <length> [*<dest_addr> | <dest_envvar>]
      
      to calculate a hash, and:
      
         hash -v <algorithm> <address> <length> [*<verify_addr> | <verify_envvar>]
      
      to verify a hash.
      
      Use CONFIG_CMD_HASH to enable the command, CONFIG_SHA1 to enable SHA1 and
      CONFIG_SHA256 to enable SHA256.
      
      The existing sha1sum command remains.
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      bf36c5d5
    • Kenneth Waters's avatar
      Add a command to read raw blocks from a partition · ff048ea9
      Kenneth Waters authored
      
      
      Sometimes data is on a block device and within a partition, but not in a
      particular filesystem.
      
      This commands permits reading raw data from a partition.
      Signed-off-by: default avatarKenneth Waters <kwaters@chromium.org>
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      ff048ea9
    • Anton Staaf's avatar
      Add gettime command · 53fdc7ef
      Anton Staaf authored
      
      
      Gettime returns the current timer value.  If CONFIG_SYS_HZ is defined
      then the timer value is also converted to seconds.
      
      Tegra20 (SeaBoard) # gettime
      Timer val: 7754
      Seconds : 7
      Remainder : 754
      sys_hz = 1000
      
      There has been some discussion about whether this is useful enough to
      be included in U-Boot. The following boards do not have CONFIG_SYS_HZ
      defined:
      
      M52277EVB
      M52277EVB_stmicro
      M53017EVB
      M54418TWR
      M54418TWR_nand_mii
      M54418TWR_nand_rmii
      M54418TWR_nand_rmii_lowfreq
      M54418TWR_serial_mii
      M54418TWR_serial_rmii
      Signed-off-by: default avatarAnton Staaf <robotboy@chromium.org>
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      53fdc7ef
  9. 06 Dec, 2012 3 commits
  10. 30 Nov, 2012 1 commit
  11. 28 Nov, 2012 1 commit
  12. 26 Nov, 2012 6 commits
  13. 19 Nov, 2012 2 commits
  14. 13 Nov, 2012 1 commit
    • Gabe Black's avatar
      fdt: Add option to default to most compatible conf in a fit image · d95f6ec7
      Gabe Black authored
      
      
      When booting a fit image with multiple configurations, the user either has to
      specify which configuration to use explicitly, or there has to be a default
      defined which is chosen automatically. This change adds an option to change
      that behavior so that a configuration can be selected explicitly, or the
      configuration which has the device tree that claims to be compatible with the
      earliest item in U-Boot's device tree.
      
      In other words, if U-Boot claimed to be compatible with A, B, and then C, and
      the configurations claimed to be compatible with A, D and B, D and D, E, the
      first configuration, A, D, would be chosen. Both the first and second
      configurations match, but the first one matches a more specific entry in
      U-Boot's device tree. The order in the kernel's device tree is ignored.
      Signed-off-by: default avatarGabe Black <gabeblack@google.com>
      
      Commit-Ready: Gabe Black <gabeblack@chromium.org>
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      d95f6ec7
  15. 06 Nov, 2012 1 commit
  16. 02 Nov, 2012 2 commits
  17. 30 Oct, 2012 1 commit