Commit 0a50b3c9 authored by Wolfgang Denk's avatar Wolfgang Denk Committed by Tom Rini
Browse files

WS cleanup: remove trailing white space


Signed-off-by: Wolfgang Denk's avatarWolfgang Denk <wd@denx.de>
Reviewed-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
parent c72231d2
......@@ -133,7 +133,7 @@ such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
......
......@@ -327,14 +327,14 @@ os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
$(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
$(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
# Snow Leopards build environment has no longer restrictions as described above
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
# macOS Mojave (10.14.X)
# macOS Mojave (10.14.X)
# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
endif
......
......@@ -408,7 +408,7 @@ struct cm_dpll {
unsigned int resv1;
unsigned int clktimer2clk; /* offset 0x04 */
unsigned int resv2[11];
unsigned int clkselmacclk; /* offset 0x34 */
unsigned int clkselmacclk; /* offset 0x34 */
};
#endif /* CONFIG_AM43XX */
......
......@@ -34,7 +34,7 @@
mov \divisor, \divisor, lsl \result
mov \curbit, \curbit, lsl \result
mov \result, #0
#else
@ Initially shift the divisor left 3 bits if possible,
......@@ -48,7 +48,7 @@
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
1: cmp \divisor, #0x10000000
cmplo \divisor, \dividend
......@@ -135,7 +135,7 @@
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
1: cmp \divisor, #0x10000000
cmplo \divisor, \dividend
......
......@@ -89,7 +89,7 @@
#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */
#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */
#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */
#define XCHAL_HAVE_HIFI_MINI 0
#define XCHAL_HAVE_HIFI_MINI 0
#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */
......
......@@ -62,7 +62,7 @@ static struct __attribute__ ((__packed__)) eeprom {
u8 mac_count; /* 0x40 Number of MAC addresses */
u8 mac_flag; /* 0x41 MAC table flags */
u8 mac[MAX_NUM_PORTS][6]; /* 0x42 - 0xa1 MAC addresses */
u8 res_2[90]; /* 0xa2 - 0xfb Reserved */
u8 res_2[90]; /* 0xa2 - 0xfb Reserved */
u32 crc; /* 0xfc - 0xff CRC32 checksum */
#endif
} e;
......
......@@ -73,7 +73,7 @@ static void sdhci_power_init(void)
/* drive strength configs for sdhc pins */
const struct tlmm_cfg hdrv[] = {
{ SDC1_CLK_HDRV, TLMM_CUR_VAL_16MA, TLMM_HDRV_MASK, },
{ SDC1_CMD_HDRV, TLMM_CUR_VAL_10MA, TLMM_HDRV_MASK, },
{ SDC1_DATA_HDRV, TLMM_CUR_VAL_10MA, TLMM_HDRV_MASK, },
......@@ -81,14 +81,14 @@ static void sdhci_power_init(void)
/* pull configs for sdhc pins */
const struct tlmm_cfg pull[] = {
{ SDC1_CLK_PULL, TLMM_NO_PULL, TLMM_PULL_MASK, },
{ SDC1_CMD_PULL, TLMM_PULL_UP, TLMM_PULL_MASK, },
{ SDC1_DATA_PULL, TLMM_PULL_UP, TLMM_PULL_MASK, },
};
const struct tlmm_cfg rclk[] = {
{ SDC1_RCLK_PULL, TLMM_PULL_DOWN, TLMM_PULL_MASK,},
};
......
......@@ -19,7 +19,7 @@ $ make
This will generate the U-Boot binary called u-boot-dtb.imx.
Put warp7 board in USB download mode:
Put warp7 board in USB download mode:
Remove the CPU board from the base board then put switch 2 in the upper
position
......
......@@ -194,7 +194,7 @@ static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
err = part_get_info(mmc_get_blk_desc(mmc), type_part, &info);
if (err)
continue;
if (info.sys_ind ==
if (info.sys_ind ==
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE) {
partition = type_part;
break;
......
......@@ -233,7 +233,7 @@ fdtfile:
the DTB with a different DTB. fdtfile will automatically be set for you if
it matches the format ${soc}-${board}.dtb which covers most 32 bit use cases.
AArch64 generally does not match as the Linux kernel put the dtb files under
SoC vendor directories.
SoC vendor directories.
ramdisk_addr_r:
......
......@@ -9,7 +9,7 @@ SoC.
1.1 MAC Address: It is stored in fuse bank 4, with the 32 lsbs in word 2 and the
16 msbs in word 3[15:0].
For i.MX6SX and i.MX6UL, they have two MAC addresses. The second MAC address
is stored in fuse bank 4, with the 16 lsb in word 3[31:16] and the 32 msbs in
is stored in fuse bank 4, with the 16 lsb in word 3[31:16] and the 32 msbs in
word 4.
Example:
......
......@@ -339,7 +339,7 @@ int atsha204a_read(struct udevice *dev, enum atsha204a_zone zone, bool read32,
retry--;
atsha204a_wakeup(dev);
} while (retry >= 0);
if (res) {
debug("ATSHA204A read failed\n");
return res;
......
......@@ -4,7 +4,7 @@
* drivers and users.
*
* Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
* Copyright © 2006 Red Hat UK Limited
* Copyright © 2006 Red Hat UK Limited
*
*/
......@@ -123,7 +123,7 @@ void *idr_get_next(struct idr *idp, int *next)
} else {
*next = 0;
}
return ret;
}
......
......@@ -907,7 +907,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
u32 time_start;
time_start = get_timer(0);
while (get_timer(time_start) < timer) {
if (chip->dev_ready) {
......
......@@ -189,7 +189,7 @@ int nand_erase_opts(struct mtd_info *mtd,
#define NAND_CMD_LOCK_TIGHT 0x2c
#define NAND_CMD_LOCK_STATUS 0x7a
/******************************************************************************
* Support for locking / unlocking operations of some NAND devices
*****************************************************************************/
......
......@@ -115,7 +115,7 @@ static struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
#else
struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
#endif
#ifndef __UBOOT__
/* Serializes UBI devices creations and removals */
DEFINE_MUTEX(ubi_devices_mutex);
......
......@@ -73,7 +73,7 @@ restart_aneg:
if (!(wol & BIT(12)) ||
((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) {
/* Looks like aneg failed after all */
if (!retries) {
printf("%s LPA corruption max attempts\n",
......
......@@ -286,7 +286,7 @@ static int stm32_fmc_of_to_plat(struct udevice *dev)
} else {
dev_dbg(dev, "cannot find st,mem_remap property\n");
}
swp_fmc = dev_read_u32_default(dev, "st,swp_fmc", NOT_FOUND);
if (swp_fmc != NOT_FOUND) {
/* set fmc swapping selection */
......
......@@ -70,16 +70,16 @@ struct reset_ops meson_reset_ops = {
.rst_deassert = meson_reset_deassert,
};
static const struct udevice_id meson_reset_ids[] = {
{ .compatible = "amlogic,meson-gxbb-reset" },
static const struct udevice_id meson_reset_ids[] = {
{ .compatible = "amlogic,meson-gxbb-reset" },
{ .compatible = "amlogic,meson-axg-reset" },
{ }
};
{ }
};
static int meson_reset_probe(struct udevice *dev)
{
struct meson_reset_priv *priv = dev_get_priv(dev);
return regmap_init_mem(dev_ofnode(dev), &priv->regmap);
}
......
......@@ -233,7 +233,7 @@ static int msm_serial_of_to_plat(struct udevice *dev)
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
priv->clk_bit_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
priv->clk_bit_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bit-rate", UART_DM_CLK_RX_TX_BIT_RATE);
return 0;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment