Commit 36aa8937 authored by Thomas Abraham's avatar Thomas Abraham Committed by Minkyu Kang
Browse files

arm: exynos: realign the code to allow support for newer 64-bit platforms



The existing Exynos 32-bit platform support needs to be realigned in
order to support newer 64-bit Exynos platforms. The driver model will
be utlized for drivers on the 64-bit Exynos platforms and so some of
the older platform support code would not be required for the newer
64-bit Exynos platforms.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: default avatarThomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang's avatarMinkyu Kang <mk7.kang@samsung.com>
parent cf75cdf9
......@@ -426,7 +426,6 @@ config TARGET_BCMNSP
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select CPU_V7
select DM
select DM_SPI_FLASH
select DM_SERIAL
......
if ARCH_EXYNOS
choice
prompt "EXYNOS board select"
prompt "EXYNOS architecture type select"
optional
config ARCH_EXYNOS4
bool "Exynos4 SoC family"
select CPU_V7
help
Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
are multiple SoCs in this family including Exynos4210, Exynos4412,
and Exynos4212.
config ARCH_EXYNOS5
bool "Exynos5 SoC family"
select CPU_V7
help
Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs
in this family including Exynos5250, Exynos5420 and Exynos5800.
endchoice
if ARCH_EXYNOS4
choice
prompt "EXYNOS4 board select"
config TARGET_SMDKV310
select SUPPORT_SPL
bool "Exynos4210 SMDKV310 board"
......@@ -25,6 +48,14 @@ config TARGET_TRATS2
config TARGET_ODROID
bool "Exynos4412 Odroid board"
endchoice
endif
if ARCH_EXYNOS5
choice
prompt "EXYNOS5 board select"
config TARGET_ODROID_XU3
bool "Exynos5422 Odroid board"
select OF_CONTROL
......@@ -68,6 +99,7 @@ config TARGET_PEACH_PIT
select OF_CONTROL
endchoice
endif
config SYS_SOC
default "exynos"
......
......@@ -5,7 +5,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += clock.o power.o soc.o system.o pinmux.o tzpc.o
obj-y += soc.o
obj-$(CONFIG_CPU_V7) += clock.o pinmux.o power.o system.o
obj-$(CONFIG_EXYNOS5420) += sec_boot.o
......@@ -13,6 +14,6 @@ ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_EXYNOS5) += clock_init_exynos5.o
obj-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o
obj-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o
obj-y += spl_boot.o
obj-y += spl_boot.o tzpc.o
obj-y += lowlevel_init.o
endif
......@@ -270,7 +270,7 @@ IS_EXYNOS_TYPE(exynos5420, 0x5420)
IS_EXYNOS_TYPE(exynos5422, 0x5422)
#define SAMSUNG_BASE(device, base) \
static inline unsigned int __attribute__((no_instrument_function)) \
static inline unsigned long __attribute__((no_instrument_function)) \
samsung_get_base_##device(void) \
{ \
if (cpu_is_exynos4()) { \
......
......@@ -1349,7 +1349,7 @@ enum exynos5420_gpio_pin {
};
struct gpio_info {
unsigned int reg_addr; /* Address of register for this part */
unsigned long reg_addr; /* Address of register for this part */
unsigned int max_gpio; /* Maximum GPIO in this part */
};
......
......@@ -11,7 +11,9 @@
void reset_cpu(ulong addr)
{
#ifdef CONFIG_CPU_V7
writel(0x1, samsung_get_base_swreset());
#endif
}
#ifndef CONFIG_SYS_DCACHE_OFF
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_ARNDALE=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_ODROID_XU3=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_ODROID=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_ORIGEN=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen"
CONFIG_SPL=y
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_PEACH_PI=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_PEACH_PIT=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_S5PC210_UNIVERSAL=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210"
CONFIG_HUSH_PARSER=y
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SMDK5250=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SMDK5420=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_SMDKV310=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-smdkv310"
CONFIG_SPL=y
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SNOW=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SPRING=y
CONFIG_DM_I2C=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-spring"
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_TRATS2=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
......
CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_TRATS=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats"
CONFIG_FIT=y
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment