Commit 7233fb31 authored by Stephen Warren's avatar Stephen Warren Committed by Tom Rini
Browse files

rpi: add Raspberry Pi 3 board ID

This allows U-Boot to known the name of the board.

The existing rpi_2_defconfig can operate correctly on the Raspberry Pi 3
in 32-bit mode /if/ you have configured the firmware to use the PL011 UART
as the console UART (the default is the mini UART). This requires two
things:
a) config.txt should contain dtoverlay=pi3-miniuart-bt
b) You should run the following to tell the VC FW to process DT when
booting, and copy u-boot.bin.img (rather than u-boot.bin) to the SD card
as the kernel image:

   path/to/kernel/scripts/mkknlimg --dtok u-boot.bin u-boot.bin.img

This works as of firmware.git commit 046effa13ebc "firmware: arm_loader:
emmc clock depends on core clock See:
https://github.com/raspberrypi/firmware/issues/572

".
Signed-off-by: Stephen Warren's avatarStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
parent 29937caa
......@@ -109,6 +109,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
"bcm2836-rpi-2-b.dtb",
true,
},
[0x8] = {
"3 Model B",
"bcm2837-rpi-3-b.dtb",
true,
},
[0x9] = {
"Zero",
"bcm2835-rpi-zero.dtb",
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment