Commit 96912453 authored by Liu Hui-R64343's avatar Liu Hui-R64343 Committed by Albert Aribaud
Browse files

fec_mxc: add support for MX53 processor



This patch add FEC support for Freescale MX53 processor
Signed-off-by: default avatarJason Liu <r64343@freescale.com>
parent 595f3e56
......@@ -354,7 +354,7 @@ static int fec_open(struct eth_device *edev)
*/
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
&fec->eth->ecntrl);
#ifdef CONFIG_MX25
#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
udelay(100);
/*
* setup the MII gasket for RMII mode
......
......@@ -147,7 +147,7 @@ struct ethernet_regs {
uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */
#ifdef CONFIG_MX25
#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */
uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */
uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */
......@@ -204,7 +204,7 @@ struct ethernet_regs {
#define FEC_ECNTRL_RESET 0x00000001 /* reset the FEC */
#define FEC_ECNTRL_ETHER_EN 0x00000002 /* enable the FEC */
#ifdef CONFIG_MX25
#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
/* defines for MIIGSK */
/* RMII frequency control: 0=50MHz, 1=5MHz */
#define MIIGSK_CFGR_FRCONT (1 << 6)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment