Commit b6059ddc authored by Dave Gerlach's avatar Dave Gerlach Committed by Lokesh Vutla
Browse files

arm: dts: k3-am642: Add r5 specific dt support



Add initial support for dt that runs on r5.
Signed-off-by: default avatarDave Gerlach <d-gerlach@ti.com>
parent 5db2915a
......@@ -1056,7 +1056,8 @@ dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
k3-j721e-r5-common-proc-board.dtb \
k3-j7200-common-proc-board.dtb \
k3-j7200-r5-common-proc-board.dtb
dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb
dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
k3-am642-r5-evm.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7622-rfb.dtb \
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
/ {
chosen {
stdout-path = "serial2:115200n8";
tick-timer = &timer1;
};
};
&cbass_main{
u-boot,dm-spl;
timer1: timer@2400000 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x2400000 0x0 0x80>;
ti,timer-alwon;
clock-frequency = <250000000>;
u-boot,dm-spl;
};
};
&main_uart0 {
u-boot,dm-spl;
};
&dmss {
u-boot,dm-spl;
};
&secure_proxy_main {
u-boot,dm-spl;
};
&dmsc {
u-boot,dm-spl;
};
&k3_pds {
u-boot,dm-spl;
};
&k3_clks {
u-boot,dm-spl;
};
&k3_reset {
u-boot,dm-spl;
};
&sdhci0 {
u-boot,dm-spl;
};
&sdhci1 {
u-boot,dm-spl;
};
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
#include "k3-am642.dtsi"
/ {
chosen {
stdout-path = "serial2:115200n8";
tick-timer = &timer1;
};
aliases {
remoteproc0 = &sysctrler;
remoteproc1 = &a53_0;
};
memory@80000000 {
device_type = "memory";
/* 2G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
};
a53_0: a53@0 {
compatible = "ti,am654-rproc";
reg = <0x00 0x00a90000 0x00 0x10>;
power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
<&k3_pds 135 TI_SCI_PD_EXCLUSIVE>;
resets = <&k3_reset 135 0>;
clocks = <&k3_clks 61 0>;
assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>;
assigned-clock-parents = <&k3_clks 61 2>;
assigned-clock-rates = <200000000>, <1000000000>;
ti,sci = <&dmsc>;
ti,sci-proc-id = <32>;
ti,sci-host-id = <10>;
u-boot,dm-spl;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
alignment = <0x1000>;
no-map;
};
};
clk_200mhz: dummy-clock-200mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <200000000>;
u-boot,dm-spl;
};
};
&cbass_main {
sysctrler: sysctrler {
compatible = "ti,am654-system-controller";
mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>;
mbox-names = "tx", "rx";
u-boot,dm-spl;
};
};
&main_pmx0 {
u-boot,dm-spl;
main_uart0_pins_default: main-uart0-pins-default {
u-boot,dm-spl;
pinctrl-single,pins = <
AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
>;
};
main_uart1_pins_default: main-uart1-pins-default {
u-boot,dm-spl;
pinctrl-single,pins = <
AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
>;
};
main_mmc0_pins_default: main-mmc0-pins-default {
u-boot,dm-spl;
pinctrl-single,pins = <
AM64X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
AM64X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
AM64X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
AM64X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
AM64X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
AM64X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
AM64X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
AM64X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
AM64X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
AM64X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
AM64X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
>;
};
main_mmc1_pins_default: main-mmc1-pins-default {
u-boot,dm-spl;
pinctrl-single,pins = <
AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
>;
};
};
&dmsc {
mboxes= <&secure_proxy_main 0>,
<&secure_proxy_main 1>,
<&secure_proxy_main 0>;
mbox-names = "rx", "tx", "notify";
ti,host-id = <35>;
ti,secure-host;
};
&main_uart0 {
/delete-property/ power-domains;
/delete-property/ clocks;
/delete-property/ clock-names;
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
status = "okay";
};
&main_uart1 {
u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
};
&sdhci0 {
/delete-property/ power-domains;
clocks = <&clk_200mhz>;
clock-names = "clk_xin";
ti,driver-strength-ohm = <50>;
disable-wp;
pinctrl-0 = <&main_mmc0_pins_default>;
};
&sdhci1 {
/delete-property/ power-domains;
clocks = <&clk_200mhz>;
clock-names = "clk_xin";
ti,driver-strength-ohm = <50>;
disable-wp;
pinctrl-0 = <&main_mmc1_pins_default>;
};
#include "k3-am642-evm-u-boot.dtsi"
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment