Merge https://source.denx.de/u-boot/custodians/u-boot-riscv

- SiFive FU740 and Unmatched support

arch/riscv/Kconfig

@@ -20,6 +20,9 @@ config TARGET_QEMU_VIRT
 config TARGET_SIFIVE_UNLEASHED
 	bool "Support SiFive Unleashed Board"
 
+config TARGET_SIFIVE_UNMATCHED
+	bool "Support SiFive Unmatched Board"
+
 config TARGET_SIPEED_MAIX
 	bool "Support Sipeed Maix Board"
 
@@ -56,11 +59,13 @@ source "board/AndesTech/ax25-ae350/Kconfig"
 source "board/emulation/qemu-riscv/Kconfig"
 source "board/microchip/mpfs_icicle/Kconfig"
 source "board/sifive/unleashed/Kconfig"
+source "board/sifive/unmatched/Kconfig"
 source "board/sipeed/maix/Kconfig"
 
 # platform-specific options below
 source "arch/riscv/cpu/ax25/Kconfig"
 source "arch/riscv/cpu/fu540/Kconfig"
+source "arch/riscv/cpu/fu740/Kconfig"
 source "arch/riscv/cpu/generic/Kconfig"
 
 # architecture-specific options below

arch/riscv/cpu/fu540/Kconfig

@@ -18,7 +18,7 @@ config SIFIVE_FU540
 	imply SPL_LOAD_FIT
 	imply SMP
 	imply CLK_SIFIVE
-	imply CLK_SIFIVE_FU540_PRCI
+	imply CLK_SIFIVE_PRCI
 	imply SIFIVE_SERIAL
 	imply MACB
 	imply MII

arch/riscv/cpu/fu740/Kconfig

+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <pragnesh.patel@sifive.com>
+
+config SIFIVE_FU740
+	bool
+	select ARCH_EARLY_INIT_R
+	select RAM
+	select SPL_RAM if SPL
+	imply CPU
+	imply CPU_RISCV
+	imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
+	imply SPL_SIFIVE_CLINT
+	imply CMD_CPU
+	imply SPL_CPU
+	imply SPL_OPENSBI
+	imply SPL_LOAD_FIT
+	imply SMP
+	imply CLK_SIFIVE
+	imply CLK_SIFIVE_PRCI
+	imply SIFIVE_SERIAL
+	imply MACB
+	imply MII
+	imply SPI
+	imply SPI_SIFIVE
+	imply MMC
+	imply MMC_SPI
+	imply MMC_BROKEN_CD
+	imply CMD_MMC
+	imply DM_GPIO
+	imply SIFIVE_GPIO
+	imply CMD_GPIO
+	imply MISC
+	imply SIFIVE_OTP
+	imply DM_PWM
+	imply PWM_SIFIVE

arch/riscv/cpu/fu740/Makefile

+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <pragnesh.patel@sifive.com>
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-y += spl.o
+else
+obj-y += dram.o
+obj-y += cpu.o
+obj-y += cache.o
+endif

arch/riscv/cpu/fu740/cache.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc
+ *
+ * Authors:
+ *   Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <asm/global_data.h>
+
+/* Register offsets */
+#define L2_CACHE_CONFIG	0x000
+#define L2_CACHE_ENABLE	0x008
+
+#define MASK_NUM_WAYS	GENMASK(15, 8)
+#define NUM_WAYS_SHIFT	8
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cache_enable_ways(void)
+{
+	const void *blob = gd->fdt_blob;
+	int node;
+	fdt_addr_t base;
+	u32 config;
+	u32 ways;
+
+	volatile u32 *enable;
+
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "sifive,fu740-c000-ccache");
+
+	if (node < 0)
+		return node;
+
+	base = fdtdec_get_addr_size_auto_parent(blob, 0, node, "reg", 0,
+						NULL, false);
+	if (base == FDT_ADDR_T_NONE)
+		return FDT_ADDR_T_NONE;
+
+	config = readl((volatile u32 *)base + L2_CACHE_CONFIG);
+	ways = (config & MASK_NUM_WAYS) >> NUM_WAYS_SHIFT;
+
+	enable = (volatile u32 *)(base + L2_CACHE_ENABLE);
+
+	/* memory barrier */
+	mb();
+	(*enable) = ways - 1;
+	/* memory barrier */
+	mb();
+	return 0;
+}

arch/riscv/cpu/fu740/cpu.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <irq_func.h>
+#include <asm/cache.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+	disable_interrupts();
+
+	cache_flush();
+
+	return 0;
+}

arch/riscv/cpu/fu740/dram.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#ifdef CONFIG_64BIT
+	/*
+	 * Ensure that we run from first 4GB so that all
+	 * addresses used by U-Boot are 32bit addresses.
+	 *
+	 * This in-turn ensures that 32bit DMA capable
+	 * devices work fine because DMA mapping APIs will
+	 * provide 32bit DMA addresses only.
+	 */
+	if (gd->ram_top > SZ_4G)
+		return SZ_4G;
+#endif
+	return gd->ram_top;
+}

arch/riscv/cpu/fu740/spl.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-201 SiFive, Inc
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <dm.h>
+#include <log.h>
+#include <asm/csr.h>
+
+#define CSR_U74_FEATURE_DISABLE	0x7c1
+
+int spl_soc_init(void)
+{
+	int ret;
+	struct udevice *dev;
+
+	/* DDR init */
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM init failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void harts_early_init(void)
+{
+	/*
+	 * Feature Disable CSR
+	 *
+	 * Clear feature disable CSR to '0' to turn on all features for
+	 * each core. This operation must be in M-mode.
+	 */
+	if (CONFIG_IS_ENABLED(RISCV_MMODE))
+		csr_write(CSR_U74_FEATURE_DISABLE, 0);
+}

arch/riscv/dts/Makefile

@@ -4,6 +4,7 @@ dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
 dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
 dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 
 targets += $(dtb-y)

arch/riscv/dts/fu740-c000-u-boot.dtsi

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) Copyright 2020-2021 SiFive, Inc
+ */
+
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+	cpus {
+		assigned-clocks = <&prci PRCI_CLK_COREPLL>;
+		assigned-clock-rates = <1200000000>;
+		u-boot,dm-spl;
+		cpu0: cpu@0 {
+			clocks = <&prci PRCI_CLK_COREPLL>;
+			u-boot,dm-spl;
+			status = "okay";
+			cpu0_intc: interrupt-controller {
+				u-boot,dm-spl;
+			};
+		};
+		cpu1: cpu@1 {
+			clocks = <&prci PRCI_CLK_COREPLL>;
+			u-boot,dm-spl;
+			cpu1_intc: interrupt-controller {
+				u-boot,dm-spl;
+			};
+		};
+		cpu2: cpu@2 {
+			clocks = <&prci PRCI_CLK_COREPLL>;
+			u-boot,dm-spl;
+			cpu2_intc: interrupt-controller {
+				 u-boot,dm-spl;
+			};
+		};
+		cpu3: cpu@3 {
+			clocks = <&prci PRCI_CLK_COREPLL>;
+			u-boot,dm-spl;
+			cpu3_intc: interrupt-controller {
+				u-boot,dm-spl;
+			};
+		};
+		cpu4: cpu@4 {
+			clocks = <&prci PRCI_CLK_COREPLL>;
+			u-boot,dm-spl;
+			cpu4_intc: interrupt-controller {
+				u-boot,dm-spl;
+			};
+		};
+	};
+
+	soc {
+		u-boot,dm-spl;
+		clint: clint@2000000 {
+			compatible = "riscv,clint0";
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+					       &cpu1_intc 3 &cpu1_intc 7
+					       &cpu2_intc 3 &cpu2_intc 7
+					       &cpu3_intc 3 &cpu3_intc 7
+					       &cpu4_intc 3 &cpu4_intc 7>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			u-boot,dm-spl;
+		};
+		prci: clock-controller@10000000 {
+			#reset-cells = <1>;
+			resets = <&prci PRCI_RST_DDR_CTRL_N>,
+				 <&prci PRCI_RST_DDR_AXI_N>,
+				 <&prci PRCI_RST_DDR_AHB_N>,
+				 <&prci PRCI_RST_DDR_PHY_N>,
+				 <&prci PRCI_RST_GEMGXL_N>,
+				 <&prci PRCI_RST_CLTX_N>;
+			reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+					"ddr_phy", "gemgxl_reset", "cltx_reset";
+		};
+		dmc: dmc@100b0000 {
+			compatible = "sifive,fu740-c000-ddr";
+			reg = <0x0 0x100b0000 0x0 0x0800
+			       0x0 0x100b2000 0x0 0x2000
+			       0x0 0x100b8000 0x0 0x1000>;
+			clocks = <&prci PRCI_CLK_DDRPLL>;
+			clock-frequency = <933333324>;
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&prci {
+	u-boot,dm-spl;
+};
+
+&uart0 {
+	u-boot,dm-spl;
+};
+
+&spi0 {
+	u-boot,dm-spl;
+};
+
+&eth0 {
+	assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>;
+	assigned-clock-rates = <125125000>;
+};
+
+&ccache {
+	status = "okay";
+};

arch/riscv/dts/fu740-c000.dtsi

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "sifive,fu740-c000", "sifive,fu740";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			compatible = "sifive,bullet0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			next-level-cache = <&ccache>;
+			reg = <0x0>;
+			riscv,isa = "rv64imac";
+			status = "disabled";
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu1: cpu@1 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x1>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu2: cpu@2 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x2>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu3: cpu@3 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x3>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu4: cpu@4 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x4>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus";
+		ranges;
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			compatible = "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			riscv,ndev = <69>;
+			interrupt-controller;
+			interrupts-extended = <
+				&cpu0_intc 0xffffffff
+				&cpu1_intc 0xffffffff &cpu1_intc 9
+				&cpu2_intc 0xffffffff &cpu2_intc 9
+				&cpu3_intc 0xffffffff &cpu3_intc 9
+				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+		};
+		prci: clock-controller@10000000 {
+			compatible = "sifive,fu740-c000-prci";
+			reg = <0x0 0x10000000 0x0 0x1000>;
+			clocks = <&hfclk>, <&rtcclk>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+		uart0: serial@10010000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10010000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <39>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		uart1: serial@10011000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10011000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <40>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		i2c0: i2c@10030000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10030000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <52>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		i2c1: i2c@10031000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10031000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <53>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi0: spi@10040000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10040000 0x0 0x1000
+			       0x0 0x20000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <41>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi1: spi@10041000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10041000 0x0 0x1000
+			       0x0 0x30000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <42>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		spi0: spi@10050000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10050000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <43>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		eth0: ethernet@10090000 {
+			compatible = "sifive,fu540-c000-gem";
+			interrupt-parent = <&plic0>;
+			interrupts = <55>;
+			reg = <0x0 0x10090000 0x0 0x2000
+			       0x0 0x100a0000 0x0 0x1000>;
+			local-mac-address = [00 00 00 00 00 00];
+			clock-names = "pclk", "hclk";
+			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+				 <&prci PRCI_CLK_GEMGXLPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		pwm0: pwm@10020000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10020000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <44 45 46 47>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		pwm1: pwm@10021000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10021000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <48 49 50 51>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		ccache: cache-controller@2010000 {
+			compatible = "sifive,fu740-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic0>;
+			interrupts = <19 21 22 20>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
+		gpio: gpio@10060000 {
+			compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+			interrupt-parent = <&plic0>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>, <31>, <32>, <33>, <34>, <35>, <36>,