Commit f10d86d3 authored by Tom Rini's avatar Tom Rini
Browse files

Merge branch 'master' of git://git.denx.de/u-boot-spi

parents 906d6fe3 adc0fabf
......@@ -637,19 +637,19 @@
interrupts = <0 151 4>;
clocks = <&qspi_clk>;
ext-decoder = <0>; /* external decoder */
num-chipselect = <4>;
num-cs = <4>;
fifo-depth = <128>;
bus-num = <2>;
status = "disabled";
};
spi0: spi@fff00000 {
compatible = "snps,dw-spi-mmio";
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfff00000 0x1000>;
interrupts = <0 154 4>;
num-chipselect = <4>;
num-cs = <4>;
bus-num = <0>;
tx-dma-channel = <&pdma 16>;
rx-dma-channel = <&pdma 17>;
......@@ -658,12 +658,12 @@
};
spi1: spi@fff01000 {
compatible = "snps,dw-spi-mmio";
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfff01000 0x1000>;
interrupts = <0 156 4>;
num-chipselect = <4>;
num-cs = <4>;
bus-num = <1>;
tx-dma-channel = <&pdma 20>;
rx-dma-channel = <&pdma 21>;
......
......@@ -297,7 +297,7 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
/* All other paramters are embedded in the child node */
subnode = fdt_first_subnode(blob, node);
if (!subnode) {
if (subnode < 0) {
printf("Error: subnode with SPI flash config missing!\n");
return -ENODEV;
}
......
......@@ -164,13 +164,13 @@ static void spi_hw_init(struct dw_spi_priv *priv)
if (!priv->fifo_len) {
u32 fifo;
for (fifo = 2; fifo <= 257; fifo++) {
for (fifo = 2; fifo <= 256; fifo++) {
dw_writew(priv, DW_SPI_TXFLTR, fifo);
if (fifo != dw_readw(priv, DW_SPI_TXFLTR))
break;
}
priv->fifo_len = (fifo == 257) ? 0 : fifo;
priv->fifo_len = (fifo == 2) ? 0 : fifo - 1;
dw_writew(priv, DW_SPI_TXFLTR, 0);
}
debug("%s: fifo_len=%d\n", __func__, priv->fifo_len);
......@@ -409,7 +409,7 @@ static const struct dm_spi_ops dw_spi_ops = {
};
static const struct udevice_id dw_spi_ids[] = {
{ .compatible = "snps,dw-spi-mmio" },
{ .compatible = "snps,dw-apb-ssi" },
{ }
};
......
......@@ -33,6 +33,12 @@
#define SEQID_PP 6
#define SEQID_RDID 7
#define SEQID_BE_4K 8
#ifdef CONFIG_SPI_FLASH_BAR
#define SEQID_BRRD 9
#define SEQID_BRWR 10
#define SEQID_RDEAR 11
#define SEQID_WREAR 12
#endif
/* QSPI CMD */
#define QSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */
......@@ -44,6 +50,14 @@
#define QSPI_CMD_SE 0xd8 /* Sector erase (usually 64KiB) */
#define QSPI_CMD_RDID 0x9f /* Read JEDEC ID */
/* Used for Micron, winbond and Macronix flashes */
#define QSPI_CMD_WREAR 0xc5 /* EAR register write */
#define QSPI_CMD_RDEAR 0xc8 /* EAR reigster read */
/* Used for Spansion flashes only. */
#define QSPI_CMD_BRRD 0x16 /* Bank register read */
#define QSPI_CMD_BRWR 0x17 /* Bank register write */
/* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */
#define QSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */
#define QSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes) */
......@@ -114,6 +128,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
/* Fast Read */
lut_base = SEQID_FAST_READ * 4;
#ifdef CONFIG_SPI_FLASH_BAR
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_FAST_READ) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
#else
if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_FAST_READ) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
......@@ -124,6 +143,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) |
OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) |
INSTR1(LUT_ADDR));
#endif
qspi_write32(&regs->lut[lut_base + 1], OPRND0(8) | PAD0(LUT_PAD1) |
INSTR0(LUT_DUMMY) | OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) |
INSTR1(LUT_READ));
......@@ -141,6 +161,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
/* Erase a sector */
lut_base = SEQID_SE * 4;
#ifdef CONFIG_SPI_FLASH_BAR
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_SE) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
#else
if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_SE) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
......@@ -149,6 +174,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_SE_4B) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
#endif
qspi_write32(&regs->lut[lut_base + 1], 0);
qspi_write32(&regs->lut[lut_base + 2], 0);
qspi_write32(&regs->lut[lut_base + 3], 0);
......@@ -163,6 +189,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
/* Page Program */
lut_base = SEQID_PP * 4;
#ifdef CONFIG_SPI_FLASH_BAR
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_PP) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
#else
if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_PP) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
......@@ -171,6 +202,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_PP_4B) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
#endif
#ifdef CONFIG_MX6SX
/*
* To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly.
......@@ -200,11 +232,141 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
#ifdef CONFIG_SPI_FLASH_BAR
/*
* BRRD BRWR RDEAR WREAR are all supported, because it is hard to
* dynamically check whether to set BRRD BRWR or RDEAR WREAR during
* initialization.
*/
lut_base = SEQID_BRRD * 4;
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_BRRD) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
PAD1(LUT_PAD1) | INSTR1(LUT_READ));
lut_base = SEQID_BRWR * 4;
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_BRWR) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
lut_base = SEQID_RDEAR * 4;
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_RDEAR) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
PAD1(LUT_PAD1) | INSTR1(LUT_READ));
lut_base = SEQID_WREAR * 4;
qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_WREAR) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
#endif
/* Lock the LUT */
qspi_write32(&regs->lutkey, LUT_KEY_VALUE);
qspi_write32(&regs->lckcr, QSPI_LCKCR_LOCK);
}
#if defined(CONFIG_SYS_FSL_QSPI_AHB)
/*
* If we have changed the content of the flash by writing or erasing,
* we need to invalidate the AHB buffer. If we do not do so, we may read out
* the wrong data. The spec tells us reset the AHB domain and Serial Flash
* domain at the same time.
*/
static inline void qspi_ahb_invalid(struct fsl_qspi *q)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)q->reg_base;
u32 reg;
reg = qspi_read32(&regs->mcr);
reg |= QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK;
qspi_write32(&regs->mcr, reg);
/*
* The minimum delay : 1 AHB + 2 SFCK clocks.
* Delay 1 us is enough.
*/
udelay(1);
reg &= ~(QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK);
qspi_write32(&regs->mcr, reg);
}
/* Read out the data from the AHB buffer. */
static inline void qspi_ahb_read(struct fsl_qspi *q, u8 *rxbuf, int len)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)q->reg_base;
u32 mcr_reg;
mcr_reg = qspi_read32(&regs->mcr);
qspi_write32(&regs->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
/* Read out the data directly from the AHB buffer. */
memcpy(rxbuf, (u8 *)(q->amba_base + q->sf_addr), len);
qspi_write32(&regs->mcr, mcr_reg);
}
static void qspi_enable_ddr_mode(struct fsl_qspi_regs *regs)
{
u32 reg, reg2;
reg = qspi_read32(&regs->mcr);
/* Disable the module */
qspi_write32(&regs->mcr, reg | QSPI_MCR_MDIS_MASK);
/* Set the Sampling Register for DDR */
reg2 = qspi_read32(&regs->smpr);
reg2 &= ~QSPI_SMPR_DDRSMP_MASK;
reg2 |= (2 << QSPI_SMPR_DDRSMP_SHIFT);
qspi_write32(&regs->smpr, reg2);
/* Enable the module again (enable the DDR too) */
reg |= QSPI_MCR_DDR_EN_MASK;
/* Enable bit 29 for imx6sx */
reg |= (1 << 29);
qspi_write32(&regs->mcr, reg);
}
/*
* There are two different ways to read out the data from the flash:
* the "IP Command Read" and the "AHB Command Read".
*
* The IC guy suggests we use the "AHB Command Read" which is faster
* then the "IP Command Read". (What's more is that there is a bug in
* the "IP Command Read" in the Vybrid.)
*
* After we set up the registers for the "AHB Command Read", we can use
* the memcpy to read the data directly. A "missed" access to the buffer
* causes the controller to clear the buffer, and use the sequence pointed
* by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
*/
static void qspi_init_ahb_read(struct fsl_qspi_regs *regs)
{
/* AHB configuration for access buffer 0/1/2 .*/
qspi_write32(&regs->buf0cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(&regs->buf1cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(&regs->buf2cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(&regs->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
(0x80 << QSPI_BUF3CR_ADATSZ_SHIFT));
/* We only use the buffer3 */
qspi_write32(&regs->buf0ind, 0);
qspi_write32(&regs->buf1ind, 0);
qspi_write32(&regs->buf2ind, 0);
/*
* Set the default lut sequence for AHB Read.
* Parallel mode is disabled.
*/
qspi_write32(&regs->bfgencr,
SEQID_FAST_READ << QSPI_BFGENCR_SEQID_SHIFT);
/*Enable DDR Mode*/
qspi_enable_ddr_mode(regs);
}
#endif
void spi_init()
{
/* do nothing */
......@@ -215,8 +377,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
{
struct fsl_qspi *qspi;
struct fsl_qspi_regs *regs;
u32 reg_val, smpr_val;
u32 total_size, seq_id;
u32 smpr_val;
u32 total_size;
if (bus >= ARRAY_SIZE(spi_bases))
return NULL;
......@@ -271,13 +433,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
qspi_write32(&regs->smpr, smpr_val);
qspi_write32(&regs->mcr, QSPI_MCR_RESERVED_MASK);
seq_id = 0;
reg_val = qspi_read32(&regs->bfgencr);
reg_val &= ~QSPI_BFGENCR_SEQID_MASK;
reg_val |= (seq_id << QSPI_BFGENCR_SEQID_SHIFT);
reg_val &= ~QSPI_BFGENCR_PAR_EN_MASK;
qspi_write32(&regs->bfgencr, reg_val);
#ifdef CONFIG_SYS_FSL_QSPI_AHB
qspi_init_ahb_read(regs);
#endif
return &qspi->slave;
}
......@@ -293,6 +451,47 @@ int spi_claim_bus(struct spi_slave *slave)
return 0;
}
#ifdef CONFIG_SPI_FLASH_BAR
/* Bank register read/write, EAR register read/write */
static void qspi_op_rdbank(struct fsl_qspi *qspi, u8 *rxbuf, u32 len)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
u32 reg, mcr_reg, data, seqid;
mcr_reg = qspi_read32(&regs->mcr);
qspi_write32(&regs->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
qspi_write32(&regs->rbct, QSPI_RBCT_RXBRD_USEIPS);
qspi_write32(&regs->sfar, qspi->amba_base);
if (qspi->cur_seqid == QSPI_CMD_BRRD)
seqid = SEQID_BRRD;
else
seqid = SEQID_RDEAR;
qspi_write32(&regs->ipcr, (seqid << QSPI_IPCR_SEQID_SHIFT) | len);
/* Wait previous command complete */
while (qspi_read32(&regs->sr) & QSPI_SR_BUSY_MASK)
;
while (1) {
reg = qspi_read32(&regs->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(&regs->rbdr[0]);
data = qspi_endian_xchg(data);
memcpy(rxbuf, &data, len);
qspi_write32(&regs->mcr, qspi_read32(&regs->mcr) |
QSPI_MCR_CLR_RXF_MASK);
break;
}
}
qspi_write32(&regs->mcr, mcr_reg);
}
#endif
static void qspi_op_rdid(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
......@@ -327,6 +526,8 @@ static void qspi_op_rdid(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
qspi_write32(&regs->mcr, mcr_reg);
}
#ifndef CONFIG_SYS_FSL_QSPI_AHB
/* If not use AHB read, read data from ip interface */
static void qspi_op_read(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
......@@ -370,11 +571,12 @@ static void qspi_op_read(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
qspi_write32(&regs->mcr, mcr_reg);
}
#endif
static void qspi_op_pp(struct fsl_qspi *qspi, u32 *txbuf, u32 len)
static void qspi_op_write(struct fsl_qspi *qspi, u8 *txbuf, u32 len)
{
struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
u32 mcr_reg, data, reg, status_reg;
u32 mcr_reg, data, reg, status_reg, seqid;
int i, size, tx_size;
u32 to_or_from = 0;
......@@ -404,22 +606,39 @@ static void qspi_op_pp(struct fsl_qspi *qspi, u32 *txbuf, u32 len)
qspi_read32(&regs->mcr) | QSPI_MCR_CLR_RXF_MASK);
}
/* Default is page programming */
seqid = SEQID_PP;
#ifdef CONFIG_SPI_FLASH_BAR
if (qspi->cur_seqid == QSPI_CMD_BRWR)
seqid = SEQID_BRWR;
else if (qspi->cur_seqid == QSPI_CMD_WREAR)
seqid = SEQID_WREAR;
#endif
to_or_from = qspi->sf_addr + qspi->amba_base;
qspi_write32(&regs->sfar, to_or_from);
tx_size = (len > TX_BUFFER_SIZE) ?
TX_BUFFER_SIZE : len;
size = (tx_size + 3) / 4;
size = tx_size / 4;
for (i = 0; i < size; i++) {
data = qspi_endian_xchg(*txbuf);
memcpy(&data, txbuf, 4);
data = qspi_endian_xchg(data);
qspi_write32(&regs->tbdr, data);
txbuf++;
txbuf += 4;
}
qspi_write32(&regs->ipcr,
(SEQID_PP << QSPI_IPCR_SEQID_SHIFT) | tx_size);
size = tx_size % 4;
if (size) {
data = 0;
memcpy(&data, txbuf, size);
data = qspi_endian_xchg(data);
qspi_write32(&regs->tbdr, data);
}
qspi_write32(&regs->ipcr, (seqid << QSPI_IPCR_SEQID_SHIFT) | tx_size);
while (qspi_read32(&regs->sr) & QSPI_SR_BUSY_MASK)
;
......@@ -495,16 +714,18 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
{
struct fsl_qspi *qspi = to_qspi_spi(slave);
u32 bytes = DIV_ROUND_UP(bitlen, 8);
static u32 pp_sfaddr;
static u32 wr_sfaddr;
u32 txbuf;
if (dout) {
memcpy(&txbuf, dout, 4);
qspi->cur_seqid = *(u8 *)dout;
if (flags & SPI_XFER_BEGIN) {
qspi->cur_seqid = *(u8 *)dout;
memcpy(&txbuf, dout, 4);
}
if (flags == SPI_XFER_END) {
qspi->sf_addr = pp_sfaddr;
qspi_op_pp(qspi, (u32 *)dout, bytes);
qspi->sf_addr = wr_sfaddr;
qspi_op_write(qspi, (u8 *)dout, bytes);
return 0;
}
......@@ -514,20 +735,46 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
(qspi->cur_seqid == QSPI_CMD_BE_4K)) {
qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
qspi_op_erase(qspi);
} else if (qspi->cur_seqid == QSPI_CMD_PP) {
pp_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
} else if (qspi->cur_seqid == QSPI_CMD_PP)
wr_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
#ifdef CONFIG_SPI_FLASH_BAR
else if ((qspi->cur_seqid == QSPI_CMD_BRWR) ||
(qspi->cur_seqid == QSPI_CMD_WREAR)) {
wr_sfaddr = 0;
}
#endif
}
if (din) {
if (qspi->cur_seqid == QSPI_CMD_FAST_READ)
if (qspi->cur_seqid == QSPI_CMD_FAST_READ) {
#ifdef CONFIG_SYS_FSL_QSPI_AHB
qspi_ahb_read(qspi, din, bytes);
#else
qspi_op_read(qspi, din, bytes);
#endif
}
else if (qspi->cur_seqid == QSPI_CMD_RDID)
qspi_op_rdid(qspi, din, bytes);
else if (qspi->cur_seqid == QSPI_CMD_RDSR)
qspi_op_rdsr(qspi, din);
#ifdef CONFIG_SPI_FLASH_BAR
else if ((qspi->cur_seqid == QSPI_CMD_BRRD) ||
(qspi->cur_seqid == QSPI_CMD_RDEAR)) {
qspi->sf_addr = 0;
qspi_op_rdbank(qspi, din, bytes);
}
#endif
}
#ifdef CONFIG_SYS_FSL_QSPI_AHB
if ((qspi->cur_seqid == QSPI_CMD_SE) ||
(qspi->cur_seqid == QSPI_CMD_PP) ||
(qspi->cur_seqid == QSPI_CMD_BE_4K) ||
(qspi->cur_seqid == QSPI_CMD_WREAR) ||
(qspi->cur_seqid == QSPI_CMD_BRWR))
qspi_ahb_invalid(qspi);
#endif
return 0;
}
......
......@@ -58,7 +58,12 @@ struct fsl_qspi_regs {
#define QSPI_MCR_END_CFD_SHIFT 2
#define QSPI_MCR_END_CFD_MASK (3 << QSPI_MCR_END_CFD_SHIFT)
#ifdef CONFIG_SYS_FSL_QSPI_AHB
/* AHB needs 64bit operation */
#define QSPI_MCR_END_CFD_LE (3 << QSPI_MCR_END_CFD_SHIFT)
#else
#define QSPI_MCR_END_CFD_LE (1 << QSPI_MCR_END_CFD_SHIFT)
#endif
#define QSPI_MCR_DDR_EN_SHIFT 7
#define QSPI_MCR_DDR_EN_MASK (1 << QSPI_MCR_DDR_EN_SHIFT)
#define QSPI_MCR_CLR_RXF_SHIFT 10
......@@ -69,6 +74,10 @@ struct fsl_qspi_regs {
#define QSPI_MCR_MDIS_MASK (1 << QSPI_MCR_MDIS_SHIFT)
#define QSPI_MCR_RESERVED_SHIFT 16
#define QSPI_MCR_RESERVED_MASK (0xf << QSPI_MCR_RESERVED_SHIFT)
#define QSPI_MCR_SWRSTHD_SHIFT 1
#define QSPI_MCR_SWRSTHD_MASK (1 << QSPI_MCR_SWRSTHD_SHIFT)
#define QSPI_MCR_SWRSTSD_SHIFT 0
#define QSPI_MCR_SWRSTSD_MASK (1 << QSPI_MCR_SWRSTSD_SHIFT)
#define QSPI_SMPR_HSENA_SHIFT 0
#define QSPI_SMPR_HSENA_MASK (1 << QSPI_SMPR_HSENA_SHIFT)
......@@ -79,6 +88,12 @@ struct fsl_qspi_regs {
#define QSPI_SMPR_DDRSMP_SHIFT 16
#define QSPI_SMPR_DDRSMP_MASK (7 << QSPI_SMPR_DDRSMP_SHIFT)
#define QSPI_BUFXCR_INVALID_MSTRID 0xe
#define QSPI_BUF3CR_ALLMST_SHIFT 31
#define QSPI_BUF3CR_ALLMST_MASK (1 << QSPI_BUF3CR_ALLMST_SHIFT)
#define QSPI_BUF3CR_ADATSZ_SHIFT 8
#define QSPI_BUF3CR_ADATSZ_MASK (0xFF << QSPI_BUF3CR_ADATSZ_SHIFT)
#define QSPI_BFGENCR_SEQID_SHIFT 12
#define QSPI_BFGENCR_SEQID_MASK (0xf << QSPI_BFGENCR_SEQID_SHIFT)
#define QSPI_BFGENCR_PAR_EN_SHIFT 16
......
......@@ -169,61 +169,49 @@ static int get_spi_gpio(int bus, struct ftssp010_gpio *chip)
static int ftssp010_wait(struct ftssp010_spi *chip)
{
struct ftssp010_regs *regs = chip->regs;
int ret = -1;
ulong t;
/* wait until device idle */
for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) {
if (readl(&regs->sr) & SR_BUSY)
continue;
ret = 0;
break;
if (!(readl(&regs->sr) & SR_BUSY))
return 0;
}
if (ret)
puts("ftspi010: busy timeout\n");
puts("ftspi010: busy timeout\n");
return ret;
return -1;
}
static int ftssp010_wait_tx(struct ftssp010_spi *chip)
{
struct ftssp010_regs *regs = chip->regs;
int ret = -1;
ulong t;
/* wait until tx fifo not full */
for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) {
if (!(readl(&regs->sr) & SR_TFNF))
continue;
ret = 0;
break;
if (readl(&regs->sr) & SR_TFNF)
return 0;
}
if (ret)
puts("ftssp010: tx timeout\n");
puts("ftssp010: tx timeout\n");
return ret;
return -1;
}
static int ftssp010_wait_rx(struct ftssp010_spi *chip)
{
struct ftssp010_regs *regs = chip->regs;
int ret = -1;
ulong t;
/* wait until rx fifo not empty */
for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) {
if (!SR_RFVE(readl(&regs->sr)))
continue;
ret = 0;
break;
if (SR_RFVE(readl(&regs->sr)))
return 0;
}
if (ret)
puts("ftssp010: rx timeout\n");
puts("ftssp010: rx timeout\n");
return ret;
return -1;
}