1. 01 Feb, 2011 2 commits
  2. 27 Jan, 2011 1 commit
  3. 18 Jan, 2011 2 commits
    • Heiko Schocher's avatar
      mpc5200, digsy_mtc: add support for rev5 board version · 466f0137
      Heiko Schocher authored and Wolfgang Denk's avatar Wolfgang Denk committed
      
      
      difference to previous board version:
      - M29W128GH flash from Numonyx
      - SDRAM ISSI IS45S16800 (Option A2 105°C)
      - rev5 uses RTC RV-3029-C2
      - update cs0 and cs1 baseaddr and length
        depending on the detected flash size.
      - added Werner Pfister <Pfister_Werner@intercontrol.de>
        as maintainer for the digsy board variants
      - As the M29W128GH needs a special flash_cmd_reset()
        document that in the new file doc/README.cfi.
      - move "#endif /* CONFIG_CMD_IDE */" to the right place
      - remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5
        boards
      - change doc/README.cfi as Stefan Roese suggested
      Signed-off-by: Heiko Schocher's avatarHeiko Schocher <hs@denx.de>
      Signed-off-by: Stefan Roese's avatarStefan Roese <sr@denx.de>
      Acked-by: default avatarDetlev Zundel <dzu@denx.de>
      cc: Wolfgang Denk <hs@denx.de>
      cc: Stefan Roese <sr@denx.de>
      cc: Werner Pfister <Pfister_Werner@intercontrol.de>
      cc: Detlev Zundel <dzu@denx.de>
      466f0137
    • Holger Brunck's avatar
      ppc, 8xx: remove obsolete km8xx boards from keymile · 1514579f
      Holger Brunck authored and Wolfgang Denk's avatar Wolfgang Denk committed
      
      
      The MPC852 based mgsuvd and kmsupx4 boards from keymile
      were initially ported but later on not developed further. So
      the respective files were removed to avoid unneeded merging
      and maintenance.
      Signed-off-by: default avatarHolger Brunck <holger.brunck@keymile.com>
      Acked-by: Heiko Schocher<hs@denx.de>
      1514579f
  4. 14 Jan, 2011 2 commits
  5. 09 Jan, 2011 1 commit
  6. 11 Jan, 2011 1 commit
  7. 16 Dec, 2010 3 commits
  8. 09 Dec, 2010 2 commits
    • Stefano Babic's avatar
      Davinci: add support for the ea20 board · 76bfe76b
      Stefano Babic authored and Wolfgang Denk's avatar Wolfgang Denk committed
      
      
      This board uses the OMAP-L138 SOM stacked on a
      custom baseboard. It supports SPI Flash, Ethernet
      with RMII.
      Signed-off-by: Stefano Babic's avatarStefano Babic <sbabic@denx.de>
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      76bfe76b
    • Sughosh Ganu's avatar
      Add board support for hawkboard · dfddb5e6
      Sughosh Ganu authored and Wolfgang Denk's avatar Wolfgang Denk committed
      
      
      The patch adds basic board support for TI's OMAP-L138 based
      Hawkboard. This board is pretty similar to the da850 EVM. Support for
      nand and network access is added in this version.
      
      The following bootup procedure is used.
      
      At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand
      controllers and copies the second stage bootloader(nand_spl) to
      RAM. The secondary bootloader then copies u-boot from a predefined
      location in the nand flash to the RAM, and passes control to the
      u-boot image.
      
      Three config options are supported
      * hawkboard_config - Used to create the u-boot.bin. Tftp the
       u-boot.bin image to the RAM from u-boot, and flash to the nand flash
       at address 0xe0000.
      
      * hawkboard_nand_config - Used to generate the secondary
       bootloader(nand_spl) image. This creates an elf file u-boot-spl
       under nand_spl/. Create an AIS signed image using this file, and
       flash it to the nand flash at address 0x20000. The ais file should
       fit in one block.
      
      * hawkboard_uart_config - This is same as the first image, but with
       the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS
      Signed-off-by: default avatarSughosh Ganu <urwithsughosh@gmail.com>
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      dfddb5e6
  9. 07 Dec, 2010 1 commit
  10. 30 Nov, 2010 2 commits
    • Stefano Babic's avatar
      Davinci: add support for the ea20 board · 649a33e4
      Stefano Babic authored
      
      
      This board uses the OMAP-L138 SOM stacked on a
      custom baseboard. It supports SPI Flash, Ethernet
      with RMII.
      Signed-off-by: Stefano Babic's avatarStefano Babic <sbabic@denx.de>
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      649a33e4
    • Sughosh Ganu's avatar
      Add board support for hawkboard · 48571ff0
      Sughosh Ganu authored
      
      
      The patch adds basic board support for TI's OMAP-L138 based
      Hawkboard. This board is pretty similar to the da850 EVM. Support for
      nand and network access is added in this version.
      
      The following bootup procedure is used.
      
      At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand
      controllers and copies the second stage bootloader(nand_spl) to
      RAM. The secondary bootloader then copies u-boot from a predefined
      location in the nand flash to the RAM, and passes control to the
      u-boot image.
      
      Three config options are supported
      * hawkboard_config - Used to create the u-boot.bin. Tftp the
       u-boot.bin image to the RAM from u-boot, and flash to the nand flash
       at address 0xe0000.
      
      * hawkboard_nand_config - Used to generate the secondary
       bootloader(nand_spl) image. This creates an elf file u-boot-spl
       under nand_spl/. Create an AIS signed image using this file, and
       flash it to the nand flash at address 0x20000. The ais file should
       fit in one block.
      
      * hawkboard_uart_config - This is same as the first image, but with
       the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS
      Signed-off-by: default avatarSughosh Ganu <urwithsughosh@gmail.com>
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      48571ff0
  11. 26 Nov, 2010 2 commits
  12. 25 Oct, 2010 1 commit
  13. 22 Oct, 2010 2 commits
  14. 19 Oct, 2010 8 commits
  15. 18 Oct, 2010 1 commit
  16. 17 Oct, 2010 2 commits
  17. 13 Oct, 2010 1 commit
    • Matt Waddel's avatar
      ARMV7: Versatile Express Coretile CortexA9x4 support · b80e41ac
      Matt Waddel authored and Wolfgang Denk's avatar Wolfgang Denk committed
      
      
      Adds support for the ARM quad-core Cortex-A9 processor
      
      This system includes a motherboard(Versatile Express), daughterboard
      (Coretile), and SOC(Cortex-A9 quad core).  The serial port, ethernet,
      and flash systems work with these additions.  The naming convention
      is:
         SOC -> CortexA9 quad core = ca9x4
         daughterboard -> Coretile = ct
         motherboard -> Versatile Express = vxp
      This gives ca9x4_ct_vxp.c as the board support file.
      Signed-off-by: default avatarMatt Waddel <matt.waddel@linaro.org>
      b80e41ac
  18. 12 Oct, 2010 1 commit
  19. 07 Oct, 2010 1 commit
  20. 06 Oct, 2010 2 commits
  21. 04 Oct, 2010 1 commit
  22. 02 Oct, 2010 1 commit