video: Drop cfg_console

The non-driver model video support was removed two years ago. Drop this
driver, which is only used by nokia_rx51.

Signed-off-by: Simon Glass <sjg@chromium.org>

README

@@ -978,7 +978,6 @@ The following options need to be configured:
 
 			CONFIG_SYS_DIU_ADDR
 			CONFIG_VIDEO
-			CONFIG_CFB_CONSOLE
 			CONFIG_VIDEO_SW_CURSOR
 			CONFIG_VGA_AS_SINGLE_DEVICE
 			CONFIG_VIDEO_BMP_LOGO

cmd/cls.c

@@ -28,8 +28,6 @@ static int do_video_clear(struct cmd_tbl *cmdtp, int flag, int argc,
 	if (video_clear(dev))
 		return CMD_RET_FAILURE;
 #endif
-#elif defined(CONFIG_CFB_CONSOLE)
-	video_clear();
 #elif defined(CONFIG_LCD)
 	lcd_clear();
 #else

common/stdio.c

@@ -368,7 +368,6 @@ int stdio_add_devices(void)
 		if (IS_ENABLED(CONFIG_LCD))
 			drv_lcd_init();
 		if (IS_ENABLED(CONFIG_VIDEO) ||
-		    IS_ENABLED(CONFIG_CFB_CONSOLE) ||
 		    IS_ENABLED(CONFIG_VIDEO_VCXK))
 			drv_video_init();
 	}

doc/usage/bootmenu.rst

@@ -88,8 +88,3 @@ To run the bootmenu at startup add these additional settings::
     CONFIG_AUTOBOOT_KEYED=y
     CONFIG_BOOTDELAY=30
     CONFIG_AUTOBOOT_MENU_SHOW=y
-
-When you intend to use the bootmenu on a color frame buffer console,
-make sure to additionally define::
-
-    CONFIG_CFB_CONSOLE_ANSI=y

drivers/video/Kconfig

@@ -708,56 +708,6 @@ config VIDEO
 	  model. Video drivers typically provide a colour text console and
 	  cursor.
 
-config CFB_CONSOLE
-	bool "Enable colour frame buffer console"
-	depends on VIDEO || ARCH_OMAP2PLUS
-	default y if VIDEO
-	help
-	  Enables the colour frame buffer driver. This supports colour
-	  output on a bitmap display from an in-memory frame buffer.
-	  Several colour devices are supported along with various options to
-	  adjust the supported features. The driver is implemented in
-	  cfb_console.c
-
-	  The following defines are needed (cf. smiLynxEM, i8042)
-		VIDEO_FB_LITTLE_ENDIAN	graphic memory organisation
-					(default big endian)
-		VIDEO_HW_RECTFILL	graphic chip supports
-					rectangle fill (cf. smiLynxEM)
-		VIDEO_HW_BITBLT		graphic chip supports
-					bit-blit (cf. smiLynxEM)
-		VIDEO_VISIBLE_COLS	visible pixel columns (cols=pitch)
-		VIDEO_VISIBLE_ROWS	visible pixel rows
-		VIDEO_PIXEL_SIZE	bytes per pixel
-		VIDEO_DATA_FORMAT	graphic data format
-					(0-5, cf. cfb_console.c)
-		VIDEO_FB_ADRS		framebuffer address
-		VIDEO_KBD_INIT_FCT	keyboard int fct (i.e. rx51_kp_init())
-		VIDEO_TSTC_FCT		test char fct (i.e. rx51_kp_tstc)
-		VIDEO_GETC_FCT		get char fct (i.e. rx51_kp_getc)
-		CONFIG_VIDEO_LOGO	display Linux logo in upper left corner
-		CONFIG_VIDEO_BMP_LOGO	use bmp_logo.h instead of linux_logo.h
-					for logo. Requires CONFIG_VIDEO_LOGO
-		CONFIG_CONSOLE_EXTRA_INFO
-					additional board info beside
-					the logo
-		CONFIG_HIDE_LOGO_VERSION
-					do not display bootloader
-					version string
-
-	  When CONFIG_CFB_CONSOLE is defined, the video console is the
-	  default console. The serial console can be forced by setting the
-	  environment 'console=serial'.
-
-config CFB_CONSOLE_ANSI
-	bool "Support ANSI escape sequences"
-	depends on CFB_CONSOLE
-	help
-	  This allows the colour buffer frame buffer driver to support
-	  a limited number of ANSI escape sequences (cursor control,
-	  erase functions and limited graphics rendition control). Normal
-	  output from U-Boot will pass through this filter.
-
 config VGA_AS_SINGLE_DEVICE
 	bool "Set the video as an output-only device"
 	depends on CFB_CONSOLE

drivers/video/Makefile

@@ -30,7 +30,6 @@ obj-y += ti/
 
 obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
 obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
-obj-$(CONFIG_CFB_CONSOLE) += cfb_console.o
 obj-$(CONFIG_FORMIKE) += formike.o
 obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
 obj-$(CONFIG_IHS_VIDEO_OUT) += ihs_video_out.o

drivers/video/omap3_dss.c

@@ -137,31 +137,3 @@ void omap3_dss_enable(void)
 	l |= LCD_ENABLE | GO_LCD | DIG_ENABLE | GO_DIG | GP_OUT0 | GP_OUT1;
 	writel(l, &dispc->control);
 }
-
-#ifdef CONFIG_CFB_CONSOLE
-int __board_video_init(void)
-{
-	return -1;
-}
-
-int board_video_init(void)
-			__attribute__((weak, alias("__board_video_init")));
-
-void *video_hw_init(void)
-{
-	static GraphicDevice dssfb;
-	GraphicDevice *pGD = &dssfb;
-	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-
-	if (board_video_init() || !readl(&dispc->gfx_ba0))
-		return NULL;
-
-	pGD->winSizeX = (readl(&dispc->size_lcd) & 0x7FF) + 1;
-	pGD->winSizeY = ((readl(&dispc->size_lcd) >> 16) & 0x7FF) + 1;
-	pGD->gdfBytesPP = 4;
-	pGD->gdfIndex = GDF_32BIT_X888RGB;
-	pGD->frameAdrs = readl(&dispc->gfx_ba0);
-
-	return pGD;
-}
-#endif