- Oct 22, 2020
-
-
Add support for the hardware pseudo random number generator found in Qualcomm SoC-s. Signed-off-by:Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
Lets add the necessary DTS node and pinctrl properties for newly added MDIO driver. Signed-off-by: -
This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: -
Since we have SPI driver for IPQ40xx QUP SPI controller, lets add the necessary nodes, pinctrl and clocks. Signed-off-by: -
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s. Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW. FIFO and Block modes are supported, no support for DMA mode is planned. Signed-off-by:
Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
When building on a 32bit host the following warning occurs: tools/image-host.c: In function ‘fit_image_read_data’: tools/image-host.c:296:56: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘__off64_t’ {aka ‘long long int’} [-Wformat=] printf("File %s don't have the expected size (size=%ld, expected=%d)\n", ~~^ %lld filename, sbuf.st_size, expected_size); ~~~~~~~~~~~~ tools/image-host.c:311:62: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘__off64_t’ {aka ‘long long int’} [-Wformat=] printf("Can't read all file %s (read %zd bytes, expexted %ld)\n", ~~^ %lld filename, n, sbuf.st_size); ~~~~~~~~~~~~ Fix the format strings. Signed-off-by:Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
As the ownership is now Hitachi Power Grids, change the license string and adapt the compatible string in DTS files. For kmeter1.dts we change it to "keymile,KMETER1" for now, as this is then compliant with what is submitted to the linux kernel. All other boards don't have a upstreamed version in linux mainline. Signed-off-by:
Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Marek Vasut <marex@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Convert all the other http:// links to https:// . www.denx.de/twiki/ seems to move to www.denx.de/wiki/ , so change it. I checked all links in this patch are valid. Signed-off-by:Naoki Hayama <naoki.hayama@lineo.co.jp>
-
%s/overwride/override/ Signed-off-by: -
doc/arch/index.rst is a list of links to each architecture. As for the sandbox details, doc/arch/sandbox.rst looks better. Signed-off-by:
-
Removed: - /arch/openrisc Added: - /arch/xtensa - /env Signed-off-by: -
This patch include these updates - Git repository has moved to GitLab - HTTPS access to the file server is allowed - pre-built images are no longer available Signed-off-by: -
This patch includes these updates - Change http://lists.denx.de/pipermail/u-boot to https://lists.denx.de/pipermail/u-boot - http://dir.gmane.org/gmane.comp.boot-loaders.u-boot is broken, so remove it - Another archive https://marc.info/?l=u-boot is available, so add it Additional information: dir.gmane.org has moved to news.gmane.io, but it only allows access to the archive via NNTP. - Server: news.gmane.io - Group : gmane.comp.boot-loaders.u-boot I don't include this information in this patch because it's not very useful without web interfaces. Signed-off-by:
-
No timer drivers return an error from get_count. Instead of possibly returning an error, just return the count directly. Signed-off-by:
Sean Anderson <seanga2@gmail.com> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by:
-
This adds kerneldocs for <timer.h>. I don't know who should maintain doc/api/timer.rst, since the timer subsystem seems to be maintained by SoC maintainers. MAINTAINERS is left un-updated for the moment. Signed-off-by:
-
The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: -
This code is intended do prevent one from setting a shell variable abc by doing abc=123 if an environment variable named abc already exists. However, the check is broken, since the env_get is done before the split on =, so we look up whether an environment variable "abc=123" exists, which is obviously never the case. One could move the code to below the split on =, but instead, just remove it, saving a little .text: The check has never worked as intended (it goes all the way back to the initial git commit), and it would anyway not guard against one first setting the shell variable, then doing 'env set abc xyz'. Signed-off-by:Rasmus Villemoes <rasmus.villemoes@prevas.dk>
-
add back again special case: -2 autoboot with no delay and no check for abort as described in Kconfig option, see common/Kconfig help text for option BOOTDELAY. Signed-off-by:
Heiko Schocher <hs@denx.de> Reviewed-by:
-
Fix some comments about functions. Move genimg_get_comp_name() above genimg_get_short_name() because genimg_get_comp_name() is related to get_table_entry_name(). Signed-off-by:
-
In show_valid_options(), this patch introduces checking whether a category has an entry ID. If not, adding it to a list for output is skipped before calling qsort(). This patch will affect all kinds of image header categories (-A, -C, -O and -T flags). Signed-off-by:
-
Add a generic function which can check whether a category has an entry ID. Signed-off-by:
-
CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but there are still places that reference integer values. Change those to hex as well. Also, update the Makefile to check for 0x0 instead of 0. This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT is set by menuconfig to 0x0: ... spl/u-boot-spl.bin exceeds file size limit: limit: 0 bytes actual: 0x80f0 bytes excess: 0x80f0 bytes Signed-off-by:Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by:
-
Fix up some logging statements in this file. Most of them should use log_debug(), apart from one error. Signed-off-by: -
We don't want the debug output to be visible in a normal boot. Silence it. Signed-off-by:
Heiko <Schocher<hs@denx.de>
-
When debugging is enabled, show the memory allocated to video frame buffers. Signed-off-by: -
It is much easier to read the bloblist addresses if it starts on a 4KB boundary. Update it to align it accordingly. Signed-off-by: -
This function can be called when it is not known whether it will find anything. This results in confusing log messages if the device is not found. It is better for the caller to log the failure, if necessary. Drop the logging from this function. Signed-off-by: -
Add some category names that were missed in recent changes. Update the comment as a reminder. Signed-off-by: -
https://gitlab.denx.de/u-boot/custodians/u-boot-stmTom Rini authored
- Activate CMD_EXPORTENV/CMD_IMPORTENV/CMD_ELF for STM32MP15 defconfig - Fix stm32prog command: parsing of FlashLayout without partition - Update MAINTAINERS for ARM STM STM32MP - Manage eth1addr on dh board with KS8851 - Limit size of cacheable DDR in pre-reloc stage in stm32mp1 - Use mmc_of_parse() to read host capabilities in mmc:sdmmc2 driver
-
-
- Oct 21, 2020
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efiTom Rini authored
Pull request for UEFI sub-system for efi-2021-01-rc1 (2) A use after free in the UEFI network stack is fixed.
-
This reverts commit eb39d8ba. The commit breaks booting of fitImage by SPL, the system simply hangs. This is because on arm32, the fitImage and all of its content can be aligned to 4 bytes and U-Boot expects just that. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Reuben Dowle <reuben.dowle@4rf.com> Cc: Tom Rini <trini@konsulko.com> Signed-off-by:
-
Patrick Delaunay authoredWhen partitions are not available on a device the command stm32prog raises an error but a device can have no partition to check in init_device() and the command need to continue to the next part_id. This patch correct an issue for ram0 target, when block_dev and mtd are NULL. For example with the simple flashlayout file: Opt Part Name Type Device Offset Binary - 0x01 fsbl Binary none 0x0 tf-a-serialboot.stm32 - 0x03 ssbl Binary none 0x0 u-boot.stm32 P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSytem ram0 0xC4000000 stm32mp157f-ev1.dtb Fixes: ffc405e6 ("stm32mp: stm32prog: add upport of partial update") Signed-off-by:
Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by:
Patrice Chotard <patrice.chotard@st.com>
-
Patrick Delaunay authored
Activate CONFIG_CMD_ELF to accept the command "bootelf". This patch simplifies the file stm32mp defconfig, as we have no reason to deactivate this command. Signed-off-by:
-
Patrick Delaunay authored
Activate CONFIG_CMD_EXPORTENV to accept the command "env export". Signed-off-by:
-
Patrick Delaunay authored
Activate CONFIG_CMD_IMPORTENV to accept the command "env import". This command is useful in script to include some variable. Signed-off-by:
-
Patrick Delaunay authored
Add the STM32MP1 RNG driver in the list of drivers supported by the STMicroelectronics STM32MP15x series. Signed-off-by:
-
Patrick Delaunay authored
Add files and directories regex "stm32" and "stm" in "ARM STM STM32MP" platform to avoid missing files or drivers supported by the STMicroelectronics series STM32MP15x. This patch adds the rules already used in Linux kernel for ARM/STM32 ARCHITECTURE. Signed-off-by:
-
Patrick Delaunay authored
Cosmetic update of gpio.h: - remove enumerate: stm32_gpio_port, stm32_gpio_pin because STM32_GPIO_XXX values are unused - move STM32_GPIOS_PER_BANK in stm32_gpio.c as its value is IP dependent and not arch dependent No functional change as number of banks and number of gpio by banks is managed by device tree since since DM migration and commit 8f651ca6 ("pinctrl: stm32: Add get_pins_count() ops"). Signed-off-by:
-
In case the KS8851 has external EEPROM attached to it, do not set eth1addr at all. The network stack will read the MAC out of the KS8851 and set eth1addr accordingly. Signed-off-by:
-
