Commits · 6d1ab4a10e3051def7c5d7b522042b84a122f0a1 · U-Boot / Custodians / DFU U-Boot Custodian Tree

Feb 08, 2021

board: sl28: add network variant 2 support · b463010b

Michael Walle authored 4 years ago and

Priyanka Jain committed 4 years ago


Although this variant has two external network ports, they are not (yet)
supported by the bootloader because they are connected via an internal
network switch. Otherwise its the same as the other variants.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

b463010b

board: sl28: add network variant 1 support · 4029d356

Michael Walle authored 4 years ago and

Priyanka Jain committed 4 years ago


This variant has one network port connected via RGMII and doesn't have
any TSN capabilities out-of-the-box. Instead it has all four SerDes
lanes available for customer use.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

4029d356

board: sl28: move ethernet aliases to variant specific dtsi · feed9008

Michael Walle authored 4 years ago and

Priyanka Jain committed 4 years ago


The variants differ in their network configuration. Move the first two
network aliases to the proper variant device tree includes. This is in
prepartion for variant 1 and 2 support which has a different network
port mapping. The network aliases for the two internal ports will stay
in the common dtsi because they are present on all board variants.

This might leave a hole if there is no ethernet1 alias. This is
intended.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

feed9008

Dec 20, 2020

board: kontron: sl28: reorder mmc devices · e668bec9

Michael Walle authored 4 years ago and

Tom Rini committed 4 years ago

Since linux commit 2e6cde96873253fd9eb0f20afd8ffd18278cff75 ("arm64:
dts: ls1028a: make the eMMC and SD card controllers use fixed indices")
mmc0 is the eMMC and mmc1 is the SD card. Also swap it in u-boot to
avoid any confusion by the user and to be aligned with linux.

Signed-off-by: Michael Walle <michael@walle.cc>

e668bec9

Dec 04, 2020
- board: sl28: add OP-TEE Trusted OS support (bl32) · 4c450daf
  Michael Walle authored 4 years ago and Tom Rini committed 4 years ago
  
  Add support to load the OP-TEE Trusted OS by the SPL. Signed-off-by: Michael Walle <michael@walle.cc>
  4c450daf
- board: sl28: add ATF support (bl31) · e057760f
  Michael Walle authored 4 years ago and Tom Rini committed 4 years ago
  
  Add support to load the bl31 part of the ARM Trusted Firmware by the SPL. Signed-off-by: Michael Walle <michael@walle.cc>
  e057760f
- board: sl28: remove u-boot from loadable DT node · ea22783f
  Michael Walle authored 4 years ago and Tom Rini committed 4 years ago
  
  It is not needed. Remove it. Signed-off-by: Michael Walle <michael@walle.cc>
  ea22783f
Oct 23, 2020

board: kontron: add sl28 support · 4ceb5c6d

Michael Walle authored 4 years ago and

Priyanka Jain committed 4 years ago


Add basic support for the Kontron SMARC-sAL28 board. This includes just
the bare minimum to be able to bring up the board and boot linux.

For now, the Single and Dual PHY variant is supported. Other variants
will fall back to the basic variant.

In particular, there is no watchdog support for now. This means that you
have to disable the default watchdog, otherwise you'll end up in the
recovery bootloader. See the board README for details.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

4ceb5c6d