- Feb 10, 2022
-
-
Signed-off-by:
Pali Rohár <pali@kernel.org> Reviewed-by:
Stefan Roese <sr@denx.de>
-
Quit esc sequence may be also in the middle of the read buffer. Fix the detection for that case. Signed-off-by:
-
- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL to bring up Ethernet. - Miscellaneous changes: Move constants to .c file and remove header file board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. Signed-off-by:
Tony Dinh <mibodhi@gmail.com> Reviewed-by:
-
The Globalscale Technologies Dreamplug board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310 driver to bring up Ethernet. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init() to use uclass mvgbe to bring up both network port 0 and 1. And remove ad-hoc code. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Add myself as maintainer (this board seems to be orphaned, could not contact Jason Cooper using current email). - Miscellaneous changes: Move constants to .c file and remove header file board/Marvell/dreamplug/dreamplug.h, cleanup comments. Signed-off-by:
-
- Feb 09, 2022
-
-
Tom Rini authored
- Assorted general code cleanups to make sure we use the right macros and use them correctly and buildman updates around kconfig.h itself. - Convert some IDE and SCSI symbols to Kconfig. - Convert CONFIG_REMAKE_ELF - Introduce conversion deadline for DM_SCSI.
-
Tom Rini authored
Rsync all defconfig files using moveconfig.py and update scripts/pylint.base Signed-off-by:Tom Rini <trini@konsulko.com>
-
Very few boards remain to be migrated: am57xx_hs_evm_usb controlcenterdc highbank ls1021atsn_qspi ls1021atsn_sdcard ls1021atwr_sdcard_ifc_SECURE_BOOT ls1046ardb_sdcard_SECURE_BOOT ls1088ardb_sdcard_qspi_SECURE_BOOT omap5_uevm pg_wcom_expu1 pg_wcom_seli8 sandbox sandbox64 sandbox_flattree sandbox_noinst sandbox_spl tools-only Addd a migration deadline for a year out. Signed-off-by:
Simon Glass <sjg@chromium.org> Reviewed-by:
-
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by:
-
This is defined based on two other CONFIGs for all boards except sandbox and durian. For sandbox the value does not matter. For durian the value seems excessive. Drop the option completely, to simplify configuration and reduce the number of things we need to convert to Kconfig. Signed-off-by:
-
At present all ahci drivers depend on AHCI except for DWC_AHCI. But no boards enable that without also enabling AHCI: /tools/moveconfig.py -f ~AHCI DWC_AHCI 0 matches Group them together and sort them in order by Kconfig name (except for AHCI_MVEBU which uses a different naming convention). Signed-off-by:
-
No boards use this driver without CONFIG_BLK, so clean up the dead code. Signed-off-by:
-
Move the SATA options inside an 'if SATA' part, so they are grouped. Fix the 'Complient' typo while we are here. Signed-off-by:
-
No boards currently use SATA without BLK: ./tools/moveconfig.py -f SATA ~BLK 0 matches Make SATA depend on BLK to avoid any future confusion. Drop the dead code. Signed-off-by:
-
This is not used in U-Boot and has not been converted to driver model. Drop it. Signed-off-by:
-
This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by:Alper Nebi Yasak <alpernebiyasak@gmail.com>
-
This option is not used in U-Boot. Drop it. Signed-off-by:
-
This converts the following to Kconfig: CONFIG_SYS_IDE_MAXBUS CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ATA_STRIDE CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_ALT_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET CONFIG_ATAPI CONFIG_IDE_RESET Signed-off-by:
-
This is not used in U-Boot anymore. Drop it. Signed-off-by:
-
Add a -a option to specify changes to the config before the build commences. For example buildman -a ~CONFIG_CMDLINE disables CONFIG_CMDLINE before doing the build. This makes it easier to try things out as well as to write tests without creating a new board or manually manging the .config file. Signed-off-by: -
If a thread crashes it is helpful to try the operation again with threading disabled. Add a hint about that. Signed-off-by: -
At present the only straightforward way to write tests that need a slightly different configuration is to create a new board with its own configuration. This is cumbersome. It would be useful if buildman could adjust the configuration of a build on the fly. In preparation for this, add a utility library which can modify a .config file according to various parameters passed to it. Signed-off-by: -
Use test_util to run the tests, with the ability to select a single test to run, if desired. Signed-off-by: -
At present the full horror of the Python traceback is shown by default. It is normally only useful for debugging. Turn it off by default and add a --debug flag to enable it. Signed-off-by: -
At present this function does not run the doctests. Allow the caller to pass these modules in as strings. Update patman to use this. Signed-off-by: -
Use the new IF_ENABLED_INT() feature to avoid needing our own inline function to handle this case. Tidy up the logic to ensure that the value is only used when present. Update the 'expected' comment also. Signed-off-by: -
At present if an optional Kconfig value needs to be used it must be bracketed by #ifdef. For example, with this Kconfig setup: config WIBBLE bool "Support wibbles, the world needs more wibbles" config WIBBLE_ADDR hex "Address of the wibble" depends on WIBBLE then the following code must be used: #ifdef CONFIG_WIBBLE static void handle_wibble(void) { int val = CONFIG_WIBBLE_ADDR; ... } #endif static void init_machine() { ... #ifdef CONFIG_WIBBLE handle_wibble(); #endif } Add a new IF_ENABLED_INT() to help with this. So now it is possible to write, without #ifdefs: static void handle_wibble(void) { int val = IF_ENABLED_INT(CONFIG_WIBBLE, CONFIG_WIBBLE_ADDR); ... } static void init_machine() { ... if (IS_ENABLED(CONFIG_WIBBLE)) handle_wibble(); } The value will be CONFIG_WIBBLE_ADDR if CONFIG_WIBBLE is defined and will produce a build error if not.. This allows us to reduce the use of #ifdef in the code, ensuring that the compiler still checks the code even if it is not ultimately used for a particular build. Add a CONFIG_IF_ENABLED_INT() version as well. If an attempt is made to use a value that does not exist (i.e. when the conditional is not enabled), an error about a non-existing function is generated, e.g.: common/bloblist.c:447: undefined reference to `invalid_use_of_IF_ENABLED_INT' Signed-off-by: -
The config_enabled() macro currently uses 0 as the default value. Update it to allow any value, so we can pass it something else, such as a non-existent function, to produce a build error if it is not defined. Also tidy up the code style for IS_ENABLED() and drop the unnecessary brackets (the value is a simple 0 or 1). Signed-off-by: -
At present the IS_ENABLED() macro has extra brackets, making it possible to write: if IS_ENABLED(CONFIG_XXX) but it is a bit confusing. Add the missing brackets. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Use IS_ENABLED() instead, which is the correct macro for checking a CONFIG option. Signed-off-by: -
This is supposed to be a build-system flag. Move it there so we can define it before linux/kconfig.h is included. Signed-off-by:
-
- Feb 08, 2022
-
-
Tom Rini authored
- J721S2 support, IPU support on DRA7, SIERRA PHY mulitlink configuration support, Nokia RX-51 DM_KEYBOARD conversion
-
Signed-off-by: -
Add configs to enable booting ethfw core in j721e Signed-off-by:Aswath Govindraju <a-govindraju@ti.com>
-
Add support for QSGMII multilink configuration. Signed-off-by: -
In some cases, a single SerDes instance can be shared between two different processors, each using a separate link. In these cases, the SerDes configuration is done in an earlier boot stage. Therefore, add support to skip reconfiguring, if it is was already configured beforehand. Signed-off-by: -
Add register sequences for PCIe + QSGMII PHY multilink configuration. Signed-off-by:
Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by:
-
Add support for multilink configuration of Sierra PHY. Currently, maximum two links are supported. Signed-off-by:
-
Add single link PCIe register configurations for no SSC and internal SSC. Also, add missing PMA lane registers for external SSC. Signed-off-by:
-
PIPE phy status is used to communicate the completion of several PHY functions. Check if PHY is ready for operation while configured for PIPE mode during startup. Signed-off-by:
-
Check if PMA cmn_ready is set indicating the startup process is complete. Signed-off-by:
-
