reset: dra7: Add a reset driver

Add a reset driver to bring IPs out of reset.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[Amjad: reset_ops structure member "free" has been renamed to "rfree",
use the latter instead]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>

MAINTAINERS

@@ -542,6 +542,7 @@ F:	drivers/ram/k3*
 F:	drivers/remoteproc/k3_system_controller.c
 F:	drivers/remoteproc/pruc_rpoc.c
 F:	drivers/remoteproc/ti*
+F:	drivers/reset/reset-dra7.c
 F:	drivers/reset/reset-ti-sci.c
 F:	drivers/rtc/davinci.c
 F:	drivers/serial/serial_omap.c

drivers/reset/Kconfig

@@ -206,4 +206,10 @@ config RESET_ZYNQMP
 	  passing request via Xilinx firmware interface to TF-A and PMU
 	  firmware.
 
+config RESET_DRA7
+	bool "Support for TI's DRA7 Reset driver"
+	depends on DM_RESET
+	help
+	  Support for TI DRA7-RESET subsystem. Basic Assert/Deassert
+	  is supported.
 endmenu

drivers/reset/Makefile

@@ -30,3 +30,4 @@ obj-$(CONFIG_RESET_SYSCON) += reset-syscon.o
 obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
 obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
 obj-$(CONFIG_RESET_ZYNQMP) += reset-zynqmp.o
+obj-$(CONFIG_RESET_DRA7) += reset-dra7.o

drivers/reset/reset-dra7.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments DRA7 reset driver
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Keerthy <j-keerthy@ti.com>
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <reset-uclass.h>
+#include <dm/device_compat.h>
+
+struct dra7_reset_priv {
+	u32 rstctrl;
+	u32 rstst;
+	u8 nreset;
+};
+
+static int dra7_reset_request(struct reset_ctl *reset_ctl)
+{
+	return 0;
+}
+
+static int dra7_reset_free(struct reset_ctl *reset_ctl)
+{
+	return 0;
+}
+
+static inline void dra7_reset_rmw(u32 addr, u32 value, u32 mask)
+{
+	writel(((readl(addr) & (~mask)) | (value & mask)), addr);
+}
+
+static int dra7_reset_deassert(struct reset_ctl *reset_ctl)
+{
+	struct dra7_reset_priv *priv = dev_get_priv(reset_ctl->dev);
+	int mask = 1 << reset_ctl->id;
+
+	if (reset_ctl->id < 0 || reset_ctl->id >= priv->nreset)
+		return -EINVAL;
+
+	dra7_reset_rmw(priv->rstctrl, 0x0, mask);
+
+	while ((readl(priv->rstst) & mask) != mask)
+		;
+
+	return 0;
+}
+
+static int dra7_reset_assert(struct reset_ctl *reset_ctl)
+{
+	struct dra7_reset_priv *priv = dev_get_priv(reset_ctl->dev);
+	int mask = 1 << reset_ctl->id;
+
+	if (reset_ctl->id < 0 || reset_ctl->id >= priv->nreset)
+		return -EINVAL;
+
+	dra7_reset_rmw(priv->rstctrl, mask, 0x0);
+
+	return 0;
+}
+
+struct reset_ops dra7_reset_ops = {
+	.request = dra7_reset_request,
+	.rfree = dra7_reset_free,
+	.rst_assert = dra7_reset_assert,
+	.rst_deassert = dra7_reset_deassert,
+};
+
+static const struct udevice_id dra7_reset_ids[] = {
+	{ .compatible = "ti,dra7-reset" },
+	{ }
+};
+
+static int dra7_reset_probe(struct udevice *dev)
+{
+	struct dra7_reset_priv *priv = dev_get_priv(dev);
+
+	priv->rstctrl = dev_read_addr(dev);
+	priv->rstst = priv->rstctrl + 0x4;
+	priv->nreset = dev_read_u32_default(dev, "ti,nresets", 1);
+
+	dev_info(dev, "dra7-reset successfully probed %s\n", dev->name);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(dra7_reset) = {
+	.name = "dra7_reset",
+	.id = UCLASS_RESET,
+	.of_match = dra7_reset_ids,
+	.probe = dra7_reset_probe,
+	.ops = &dra7_reset_ops,
+	.priv_auto = sizeof(struct dra7_reset_priv),
+};