- Aug 19, 2013
-
-
1. Reformat tx/rx descriptor as an uniform struct. 2. Replace uint32_t[2] with uint64_t for descriptor control. Signed-off-by:
Kuo-Jung Su <dantesu@faraday-tech.com> CC: Joe Hershberger <joe.hershberger@gmail.com>
-
Signed-off-by:
Kuo-Jung Su <dantesu@faraday-tech.com> CC: Joe Hershberger <joe.hershberger@gmail.com>
-
Signed-off-by:
Kuo-Jung Su <dantesu@faraday-tech.com> CC: Joe Hershberger <joe.hershberger@gmail.com>
-
The __* keywords are reserved. On FreeBSD __unused evaluates to the attribute unused, causing a compilation failure. Just use unused instead. Signed-off-by:
Jeroen Hofstee <jeroen@myspectrum.nl> cc: joe.hershberger@gmail.com
-
Signed-off-by:
Tom Rini <trini@ti.com>
-
Signed-off-by:
Tom Rini <trini@ti.com>
-
Signed-off-by:
Tom Rini <trini@ti.com>
-
This patch adds support for Realtek PHY modules RTL8211DN and RTL8211E (variants: RTL8211E-VB-CG, RTL8211E-VL-CG, RTL8211EG-VB-CG), which can be found on Freescale's T1040RDB boards. To make the driver more generic across 8211 family, a generic name 8211x is added for macros and function names. Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@freescale.com> Acked-by:
York Sun <yorksun@freescale.com>
-
This patch adds support for the SMSC9500 with product id 0x9900 which is equipped in the "EXSYS USB 2.0" etherner USB adapter. Tested on omap3_beagle. Signed-off-by:
Stefan Roese <sr@denx.de>
-
Use ARRAY_SIZE instead of having similar implementation in each drivers. The NUMELEMS defined in drivers/net/npe/include/IxOsalTypes.h is not used at all, so this patch removes it instead of converting it to use ARRAY_SIZE. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Ben Warren <biggerbadderben@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Marek Vasut <marex@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com>
-
LAN8710/8720 are 10/100 Mbps PHYs, so fix the '.features' field. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com>
-
Axel Lin authored
Use default_serial_puts() instead of its own implementation. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Marek Vasut <marex@denx.de> Acked-by:
Michal Simek <monstr@monstr.eu>
-
Signed-off-by:
Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by:
Stefan Roese <sr@denx.de>
-
Up to this point some PHY initialization was done from the FPGA and some from u-boot. From now all initialization is done from u-boot. To keep this maintainable a PHY setup machine was implemented that can execute commands from initialization arrays. Signed-off-by:
Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by:
Stefan Roese <sr@denx.de>
-
Add a new iocon flavor with a second communiction port per channel. Signed-off-by:
Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by:
Stefan Roese <sr@denx.de>
-
Add a new iocon flavor with fiber instead of copper connectivity. Signed-off-by:
Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by:
Stefan Roese <sr@denx.de>
-
- Aug 18, 2013
-
-
git://88.191.163.10/u-boot-armTom Rini authored
Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by:
Tom Rini <trini@ti.com>
-
- Aug 17, 2013
-
-
Albert ARIBAUD authored
-
- Aug 16, 2013
-
-
Axel Lin authored
Signed-off-by:
Axel Lin <axel.lin@ingics.com> Reviewed-by:
Thierry Reding <thierry.reding@gmail.com> Acked-by:
Marek Vasut <marex@denx.de>
-
Commit 669dfc2e adds libfdt_env.h to HOSTCPPFLAGS. It causes stdio.h to be included before _GNU_SOURCE is defined in C files. On some old hosts some prototypes are protected by #ifdef __USE_GNU, which is set when _GNU_SOURCE is defined. Signed-off-by:
York Sun <yorksun@freescale.com> Acked-by:
Simon Glass <sjg@chromium.org>
-
Simon Glass authored
The timestamp is shown in fit_print_contents() but for some reason not in fit_image_print(). This seems to be an oversight, since it is the latter which is used by bootm. Add timestamp printing in this case. (There is code duplication in these two function, for looking at in a future patch). Signed-off-by:
Simon Glass <sjg@chromium.org>
-
Paul B. Henson authored
This function is only defined if CONFIG_SILENT_CONSOLE is set and CONFIG_SILENT_U_BOOT_ONLY is not set, the call to it should be based on the same conditions. Signed-off-by:
Paul B. Henson <henson@acm.org> Acked-by:
Simon Glass <sjg@chromium.org>
-
Simon Glass authored
At present the console for linux is silent if the U-Boot console is silent, unless CONFIG_SILENT_U_BOOT_ONLY is set. I wonder if a better way would be to have an environment variable to control this? Then we can control the verbosity from scripts, and set the variable to 'no' for those boards that want Linux to boot with console output. Signed-off-by:
Simon Glass <sjg@chromium.org>
-
Taras Kondratiuk authored
If image name is longer than 32 bytes, then it will be truncated. This will remove '\0' at the end of the line, so printf will go out of string limit. Signed-off-by:
Taras Kondratiuk <taras@ti.com> Reviewed-by:
Tom Rini <trini@ti.com>
-
Angus Ainslie authored
This is a trivial patch that just enables xmodem downloads using the existing ymodem framework. Signed-off-by:
Angus Ainslie <angus@akkea.ca>
-
- Aug 15, 2013
-
-
TENART Antoine authored
Signed-off-by:
Antoine Tenart <atenart@adeneo-embedded.com> [trini: Change to SPDX, fix a few compiler warnings, adapt to CONFIG_OMAP_COMMON] Signed-off-by:
Tom Rini <trini@ti.com>
-
TENART Antoine authored
Signed-off-by:
Antoine Tenart <atenart@adeneo-embedded.com> [trini: Fix warnings about vtp things in emif4.c, adapt AM43XX] Signed-off-by:
Tom Rini <trini@ti.com>
-
TENART Antoine authored
Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX Signed-off-by:
Antoine Tenart <atenart@adeneo-embedded.com> [trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX] Signed-off-by:
Tom Rini <trini@ti.com>
-
Heiko Schocher authored
add the am1808 based ipam390 board from Barix. - 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM interface - 128MByte, NAND Flash, 8bit databus to the NANDFlash Interface - Ethernet PHY Micrel KSZ8051R via RMII - Console on UART 0 - booting fron nand flash - spl falcon bootmode Signed-off-by:
Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
-
Heiko Schocher authored
in arch_cpu_init() uart2 is fix enabled, without reference the setting from CONFIG_SYS_NS16550_COM1. Use the setting from CONFIG_SYS_NS16550_COM1 for enabling the console. Signed-off-by:
Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <tom.rini@gmail.com> Cc: Christian Riesch <christian.riesch@omicron.at>
-
Heiko Schocher authored
In case CONFIG_BOOTSTAGE is not defined, call from bootstage_mark_name() show_boot_progress(), so get more BOOTSTAGE_ID* ids in show_boot_progress() if CONFIG_BOOTSTAGE is not defined. Signed-off-by:
Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by:
Simon Glass <sjg@chromium.org>
-
Heiko Schocher authored
Signed-off-by:
Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
-
Tom Rini authored
Add the generic "poke a GPIO" command, with the GPIO related defines. Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
Tom Rini <trini@ti.com>
-
Tom Rini authored
Add the generic "poke the SPI bus" command, with the SPI related defines. Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
Tom Rini <trini@ti.com>
-
Tom Rini authored
Update omap5_common.h to use ti_armv7_common.h, and in turn update dra7xx_evm.h and omap5_uevm.h slightly. The biggest changes here are that IP blocks which exist on the platform, and had clocks enabled, now have the drivers being built as well. Signed-off-by:
Tom Rini <trini@ti.com>
-
Tom Rini authored
We create two new files, include/configs/ti_armv7_common.h for all of the common IP blocks and related features / commands we share in virtually all of our platforms. We then create include/configs/ti_am335x_common.h for everything common to the am335x SoC leaving just the board specific parts to include/configs/ti_am335x_common.h. Signed-off-by:
Tom Rini <trini@ti.com>
-
Tom Rini authored
Bring in the 'boot_fdt' environment variable that i.MX boards use to try and load a device tree when booting. Signed-off-by:
Tom Rini <trini@ti.com>
-
Tom Rini authored
With device trees, boards do not always set CONFIG_MACH_TYPE now, so we must not rely on this define being set. The kernel uses ~0 to see if we have a valid machine number or not, so set that as the default, invalid machine, id and only fix if CONFIG_MACH_TYPE is set. Acked-by:
Dan Murphy <dmurphy@ti.com> Tested-by:
Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by:
Tom Rini <trini@ti.com>
-
Tom Rini authored
Signed-off-by:
Tom Rini <trini@ti.com>
-
Tom Rini authored
We defined PHYS_DRAM_1 to 0x80000000 (start of DRAM) and then used this for CONFIG_SYS_SDRAM_BASE. But then we kept on referencing PHYS_DRAM_1 in other places. Change to directly setting CONFIG_SYS_DRAM_BASE and then using that name in code. Signed-off-by:
Tom Rini <trini@ti.com>
-