- Sep 12, 2008
-
-
Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by:
Stefan Roese <sr@denx.de>
-
- Sep 10, 2008
-
-
Also set up the port pins for using I2C. Signed-off-by:Heiko Schocher <hs@denx.de>
-
When not using hush, the autoscr command now executes lines that are only one character long. It also runs the last line of scripts even if it does not end in a newline. Signed-off-by:Petri Lehtinen <petri.lehtinen@inoi.fi>
-
On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands and glacier. Signed-off-by:Victor Gallardo <vgallardo@amcc.com>
-
-
Signed-off-by: -
Signed-off-by: -
Signed-off-by:
-
- Sep 09, 2008
-
-
Andrew Klossner authored
Fix printf format-string/arg mismatches under -DDEBUG. These warnings occur with DEBUG defined for a platform using cpu/mpc85xx. Users of other architectures can unearth similar problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right after "CFLAGS += $(call cc-option,-fno-stack-protector)". Signed-off-by:
Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by:
Andy Fleming <afleming@freescale.com>
-
-
Wolfgang Denk authored
Signed-off-by:Wolfgang Denk <wd@denx.de>
-
Kumar Gala authored
The e500um says the timebase is volatile out of reset. To ensure TB sync works we need to make sure its zero. Signed-off-by:Kumar Gala <galak@kernel.crashing.org>
-
print load_end value not pointer Signed-off-by:Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
...as done in image.c Signed-off-by: -
Signed-off-by:Markus Heidelberg <markus.heidelberg@web.de>
-
Signed-off-by: -
Fix the problem that cannot work RTL8169 on sh7785lcr board. Signed-off-by:Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
-
Andy Fleming authored
-
TsiChung Liew authored
Add MTD SPI Flash support for M25P16, M25P20, M25P32, M25P40, M25P64, M25P80, M25P128. Signed-off-by:
Jason McMullan <mcmullan@netapp.com> Signed-off-by:
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
-
Wolfgang Denk authored
We must link with libgeneric now. Signed-off-by: -
The patch is that check if usb_get_dev_index() function return valid pointer. If valid, continue. Otherwise return -1. Signed-off-by:
Ryan Chen <ryan.chen@st.com> Acked-by:
Markus Klotzbuecher <mk@denx.de>
-
A recent commit (936897d4) enabled the usb_stop() command in common/cmd_bootm.c which was not enabled for some time, because no board did actually set the CFG_CMD_USB flag. So, now the usb_stop() is executed before loading the linux kernel. However, the usb_ohci driver hangs up (at least on AT91SAM) if the driver is stopped twice (e.g. the peripheral clock is stopped on AT91). If some other piece of code calls usb_stop() before the bootm command, this command will hangup the system during boot. (usb start and stop is typically used while booting from usb memory stick) But, stopping the usb stack twice is useless anyway, and a flag already existed that kept track on the usb_init()/usb_stop() calls. So, we now check if the usb stack is really started before we stop it. This problem is now fixed in both the upper as low-level layer. Signed-off-by:
Remy Bohmer <linux@bohmer.net> Acked-by:
-
Wolfgang Denk authored
-
This patch solves the problems compiling ml507, v5fx30teval and ppc440-generic out of tree. Signed-off-by: -
Fix output of the usb storage command. It was printing "Device 0: not available" because IF_TYPE_USB was not included into the switch statement. Signed-off-by:Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
-
Signed-off-by:Bartlomiej Sieka <tur@semihalf.com>
-
- add function fit_all_image_check_hashes() that verifies if all hashes of all images in the FIT are valid - improve output of fit_image_check_hashes() when the hash check fails Signed-off-by: -
Signed-off-by: -
Signed-off-by:Peter Tyser <ptyser@xes-inc.com>
-
Signed-off-by: -
Pantelis Antoniou stated: AFAIK, it is still used but the products using PPC are long gone. Nuke it plz (from orbit). So remove it since it cleans up a usage of env_get_char outside of the environment code. Signed-off-by: -
Wolfgang Denk authored
Several source files need to be compiled and linked when one or more config options are selected. To allow for easy selection in the Makefiles yet to avoild multiple compilation (which costs build time) and especially multiple linking (which causes errors), we use "COBJS = $(sort COBJS-y)" which eliminates duplicates. By courtesy of Detlev Zundel who suggested this approach. Signed-off-by: -
Signed-off-by:Andreas Engel <andreas.engel@ericsson.com>
-
They only differ in the init function. This also adds the missing watchdog support for the PL011. Signed-off-by: -
SREC files do not need gap fill: The load address is specified in the file. On the other hand, it can't be avoided in a .bin object. It has no information about memory location. Signed-off-by: -
Signed-off-by: -
Attempt to bring i386 / sc520 inline with master Signed-off-by:Graeme Russ <graeme.russ@gmail.com>
-
Add support for environment in NAND with automatic NOR / NAND recognition, including unaligned environment, bad-block skipping, redundant environment copy. Signed-off-by:Guennadi Liakhovetski <lg@denx.de>
-
Signed-off-by:
Matthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by:
-
Signed-off-by:Sergei Poselenov <sposelenov@emcraft.com>
-
