- Nov 10, 2021
-
-
Field srcaddr in kwbimage v0 needs to be adjusted similarly like in v1. Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Marek Behún <marek.behun@nic.cz> Reviewed-by:
Stefan Roese <sr@denx.de>
-
Kwbimage v0 has similar alignment requirements as v1. Signed-off-by:
-
Fill the real header size without padding into the main header This allows to reduce final image when converting image to another format which does not need additional padding. Signed-off-by:
-
Currently kwbimage header is always aligned to 4096 bytes. But it does not have to be aligned to such a high value. The header needs to be just 4-byte aligned, while some image types have additional alignment restrictions. This change reduces size of kwbimage binaries by removing extra padding between header and data part. Signed-off-by:
-
This change allows to convert image from one format to another without need to include unnecessary padding (e.g. when target image format has smaller alignment requirement as source image format). Do it by storing real image data size without padding to the kwbimage header. Signed-off-by:
-
xmodem block size is 128 bytes, therefore it is possible to transfer only images with size multiple of 128 bytes. kwboot automatically pads image with zero bytes at the end to align it to 128 bytes boundary. Do this padding when generating image to allow uploading with other xmodem tools or older kwboot versions. Signed-off-by:
-
There are more unused enums and function prototypes. Remove them. The function kwbimage_check_params() does not return enum kwbimage_cmd_types, but a boolean value returned as int. Signed-off-by:
-
kwbimage v0 sldo has 32-bit data checksum at the end like kwbimage v1. Use same data checksum validation for both v0 and v1 image types. Signed-off-by:
-
kwbimage must have valid blockid member instead of zero value. Thus if config file does not contain BOOT_FROM command, use by default the value for SPI booting (which is probably the most common). Signed-off-by:
-
For documentation purposes update struct main_hdr_v0 to include information where version of the image must be stored. For kwbimage v0 it obviously must be 0. By default all image header memory is initialized to zero, therefore this change has no functional effect. Signed-off-by:
-
These two commands allow to specify custom setting of UART port used for printing BootROM messages. Signed-off-by:
-
Header file mach/cpu.h already defines MBUS_PCI_MEM_SIZE macro which defines size of MBUS_PCI_MEM_BASE window. So use global MBUS_PCI_MEM_SIZE macro instead of locally defined PCIE_MEM_SIZE macro. Both macros have same definition. Signed-off-by:
-
It is useful to see kwboot version in the boot log output for debugging purposes. Signed-off-by:
-
Properly calculate and align image header size to xmodem block size. Kirkwood v0 images do not have stored total size of header in header structure itself like it is for v1 images. So kwbheader_size() calculates size by traversing image structure itself. Aligning is done in kwboot by putting zero padding bytes between the header and data part. Signed-off-by:
Tony Dinh <mibodhi@gmail.com> Reviewed-by:
-
- Nov 09, 2021
-
-
https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini authored
[trini: Migrate CONFIG_EXYNOS7420 as part of merging, so espresso7420 still builds] Signed-off-by:Tom Rini <trini@konsulko.com>
-
Minkyu Kang authored
to fix following checkpatch warnings. Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible Signed-off-by:
Minkyu Kang <mk7.kang@samsung.com> Cc: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Minkyu Kang authored
to fix following checkpatch warings. WARNING: struct should normally be const Signed-off-by:
-
At present the counter never hits the comparitor in this case. Add a special case. This ensures that the snow backlight works when at full brightness. Fixes: 76c2ff3e video: backlight: fix pwm's duty cycle calculation Signed-off-by:
Simon Glass <sjg@chromium.org> Signed-off-by:
-
-
- Nov 08, 2021
-
-
Leo Yu-Chi Liang authored
This statement has an unmatched parentheses, fix it. Signed-off-by:
Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by:
Bin Meng <bmeng.cn@gmail.com> -
Leo Yu-Chi Liang authored
According to ./include/linux/kconfig.h, CONFIG_IS_ENABLED(OF_BOARD) expands to 0 when CONFIG_SPL_BUILD is defined because there is no CONFIG_SPL_OF_BOARD. Use #if defined instead. Fixes: 2e8d2f88 ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards") Signed-off-by:
Rick Chen <rick@andestech.com> Reviewed-by:
Bin Meng <bmeng.cn@gmail.com> -
Wei Fu authored
This patch adds memcpy_fromio and memcpy_toio definitions for some device drivers which have these definitions, like cadence_qspi_apb.c Signed-off-by:
Wei Fu <wefu@redhat.com> Reviewed-by:
Bin Meng <bmeng.cn@gmail.com> -
Heinrich Schuchardt authored
Let the sbi command show the SBI implementation version Signed-off-by:
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by:
-
Heinrich Schuchardt authored
Provide function sbi_get_impl_version() to retrieve the SBI implementation version. Signed-off-by:
-
https://source.denx.de/u-boot/custodians/u-boot-efiTom Rini authored
Pull request for efi-2022-01-rc2 Documentation: * improve description of mmc rescan * remove obsolete PPC documenation UEFI * Provide unit test for the EFI_TCG2_PROTOCOL * Implement add EFI_TCG2_PROTOCOL.SubmitCommand * Start the implementation of a 64 bit EFI app * Reduce rcar3_salvator-x image size
-
- Nov 07, 2021
-
-
Heinrich Schuchardt authored
Currently output of dfu commands ends on a line with leading hash signs ('#'). The succeeding output should be placed on a new line. After writing updates via dfu print a new line. Signed-off-by:Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Heinrich Schuchardt authored
rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit. Disable support for Unicode capitalization. Signed-off-by: -
This commit adds the missing EFI_TCG2_PROTOCOL selftest and Measured Boot selftest in lib/efi_selftest. This selftest includes PE/COFF image measurement test, some PCR values are different in each architecture. With that, this commit also adds pre-built versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and riscv64. Prebuilding avoids the problem of reproducible builds. Signed-off-by:
Masahisa Kojima <masahisa.kojima@linaro.org> Make the test 'onrequest'. Add code comments to the includes with the binaries. Reviewed-by:
-
The current EFI video driver only works when running in the stub. In that case the stub calls boot services (before jumping to U-Boot proper) and copies the graphics info over to the efi table. This is necessary because the stub exits boot services before jumping to U-Boot. The app maintains access to boot services throughout its life, so does not need to do this. Update the driver to support calling boot services directly. Enable video output for the app. Note that this uses the EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa. A sample qemu command-line for this case is: qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd -drive id=disk,file=try.img,if=none,format=raw -nic none -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0 Signed-off-by:
-
Add a function to return this information along with a stub for the efi_info_get() function, since calling it otherwise hangs U-Boot. Signed-off-by:
-
This variable is already defined by the EFI code. Drop the duplicate definition when building a 64-bit EFI app. Signed-off-by:
-
Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app that runs under that. Add a (non-functional) build for this. Note that --whole-archive causes the gcc 9.2 linker to crash, so disable this for now. Once this is resolved, things should work. For now, avoid mentioning the documentation for the 64-bit app, since it does not work. Signed-off-by:
-
Most EFI implementations use 64-bit but U-Boot only supports running as a 32-bit app at present. While efi-x86_payload64 does boot from 64-bit UEFI it immediately changes back to 32-bit before starting U-Boot. In order to support a 64-bit U-Boot app, update the Kconfig to add an option for 32/64 bit. Update the prompt for the existing option so it is clear it relates to the stub. Move both up to just under the choice that controls them, since this looks better and the menu. Use CONFIG_EFI_APP in the Makefile instead of CONFIG_TARGET_EFI_APP, since the latter is specific to a single target and we will have two. Memory size is set to 32MB for now so that it can run on qemu without increasing the default memory size. We may need to increase the default later. Signed-off-by:
-
For the EFI app, we must embed the devicetree in the ELF file since that is the only thing that is run by UEFI. Drop the warning to avoid confusion. Signed-off-by:
-
There is no need to avoid driver model for networking. Drop this. Signed-off-by:
-
It is quite complicated to run U-Boot on QEMU since we have four different builds and they must use different versions of qemu and the UEFI binaries. Add a script to help. It requires U-Boot itself to be built. Once that is done you can use this script to build an image for use with qemu and optionally run it. Signed-off-by: -
This commit adds the EFI_TCG2_PROTOCOL.SubmitCommand required in the TCG PC Client PFP spec. SubmitCommand enables to send the raw command to the TPM device. To implement this api, tpm2_submit_command() is added into tpm-v2.c. Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org>
-
Calling unaligned/access-ok.h version of put_unaligned_le64() causes data abort in arm 32-bit QEMU. The similar issue also occurs in linux kernel, unaligned/access-ok.h is no longer used in linux kernel[1]. This commit uses the unaligned/be_byteshift.h and unaligned/le_byteshift.h helper instead of unaligned/access-ok.h. [1]https://lore.kernel.org/all/20210507220813.365382-8-arnd@kernel.org/ Signed-off-by:
-
As we discussed in ML, currently a device tree is the only place to store public keys for capsule authentication. So __weak is not necessary for now. Signed-off-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by:
-
Heinrich Schuchardt authored
Provide human readable descriptions of the speed nodes instead of the name of constants from the code. Signed-off-by:
-
