- Apr 18, 2019
-
-
Eugeniy Paltsev authored
Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com>
-
Eugeniy Paltsev authored
Signed-off-by:
-
Eugeniy Paltsev authored
Add the DM_MMC-compatible DesignWare MMC driver support for Synopsys ARC devboards. It is created to switch ARC devboards to use DM_MMC. It required information such as clocks (Bus Interface Unit clock, Card Interface Unit clock) and SDIO bus width. Signed-off-by:
-
- Apr 15, 2019
-
-
git://git.denx.de/u-boot-imxTom Rini authored
Move to DM ----------- - DM support in sata - Toradex Board to DM - wandboard to DM - tbs2910 to DM - GE boards to DM - VHybrid boards to DM - DM_VIDEO for i.MX
-
git://git.denx.de/u-boot-efiTom Rini authored
Pull request for UEFI sub-system for v2019.07-rc1 (2) In the aarch64 crash dump information about the loaded EFI images is added. In README.uefi the development target is for the UEFI subsystem is described as "Embedded Base Boot Requirements (EBBR) Specification" compliance. Several bug fixes are supplied.
-
git://git.denx.de/u-boot-videoTom Rini authored
- optional backlight PWM polarity config via polarity cell - bug fix for ASCII characters > 127 - ANSI sequence handling extensions (implement clear line, reverse video and relative cursor movement commands) - preparation for doing character set translations - left/right and up/down arrow keys translation to ANSI control sequences for cursor movement to fix selection with an USB keyboard in bootmenu - CONFIG_SYS_WHITE_ON_BLACK font scheme configuration for sunxi boards
-
- Apr 14, 2019
-
-
This fixes the build failure "u-boot.imx exceeds file size limit". Signed-off-by:Soeren Moch <smoch@web.de>
-
In the sunxi-common.h config header we unconditionally define CONFIG_SYS_WHITE_ON_BLACK, although it's actually a Kconfig option which could be individually selected by a user. Remove this #define from the header and let it default to "y" on sunxi boards (like we do for other platforms). Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
So far arrows key pressed on an USB keyboard got translated to some low ASCII control sequences (Ctrl+N, Ctrl+P). Some programs understand these codes, but the standard for those keys is to use ANSI control sequences for cursor movement (ESC [ A). Our own boot menu is a victim of this, currently we cannot change the selection with an USB keyboard due to this. Since we already implement a queue for USB key codes, we can just insert the three character ANSI sequence into the key buffer. This fixes the bootmenu, and is more universal for other users (UEFI) as well. Signed-off-by:
-
In preparation for doing character set translations, factor out the actual glyph display functionality into a separate function. This will be used in a subsequent patch. Signed-off-by:
-
There is a standard ANSI terminal escape sequence to clear a whole line of text. So far the DM_VIDEO console was missing this code. Detect the sequence and use vidconsole_set_row with the background colour to fix this omission. Signed-off-by:
-
The ANSI terminal escapce sequence standard defines relative cursor movement commands (ESC [ A-F). So far the DM_VIDEO console code was ignoring them. Interpret those sequences and move the cursor by the requested amount of rows or columns in the right direction. This brings the code on par with the legacy video console driver (cfb_console). Signed-off-by:
-
The video console for DM_VIDEO compliant drivers only understands a very small number of ANSI sequences. First and foremost it misses the "reverse video" command, which is used by our own bootmenu command to highlight the selected entry. To avoid forcing people to use their imagination when using the bootmenu, let's just implement the rather simple reverse effect. We need to store the background colour index for that, so that we can recalculate both the foreground and background colour pixel values. Signed-off-by:
Anatolij Gustschin <agust@denx.de>
-
When the character to be printed on a DM_VIDEO console is from the "extended ASCII" range (0x80 - 0xff), it will be treated as a negative number, as it's declared as a signed char. This leads to negative array indicies into the glyph bitmap array, and random garbled characters. Cast the character to an unsigned type to make the index always positive and avoid an out-of-bounds access. Signed-off-by:
-
This patch enables the reading of the polarity cell from a PWM phandle and calls pwm_set_invert(). Not all platforms have polarity cell, so skip if it's not pressent. Signed-off-by:
Stefan Mavrodiev <stefan@olimex.com> Reviewed-by:
-
git://git.denx.de/u-boot-spiTom Rini authored
Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by:Tom Rini <trini@konsulko.com>
-
- Apr 13, 2019
-
-
Enable CONFIG_AHCI to fix errors: drivers/ata/dwc_ahsata.c: In function `ahci_init_one': drivers/ata/dwc_ahsata.c:868:21: error: `struct blk_desc' has no member named `priv' sata_dev_desc[pdev].priv = uc_priv; ^ drivers/ata/dwc_ahsata.c: In function `init_sata': drivers/ata/dwc_ahsata.c:891:30: error: `struct blk_desc' has no member named `priv' uc_priv = sata_dev_desc[dev].priv; ... Also enable DM_SCSI to fix migration build warning. Signed-off-by: -
Fix broken build: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument Signed-off-by: -
Fix broken build: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument Signed-off-by: -
Add device trees to Makefile to avoid newly introduced error: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument make[1]: *** [dts/Makefile:28: arch/arm/dts/imx6-apalis.dtb] Error 1 make: *** [Makefile:1009: dts/dt.dtb] Error 2 Signed-off-by:Marcel Ziswiler <marcel.ziswiler@toradex.com>
-
ipu.h header is not found since the ipuv3 driver was moved to the drivers/video/imx subdirectory. Fix it. Signed-off-by: -
Fix toradex_modules array off by one issue potentially leading to spurious printout during boot e.g. Model: Toradex V1.2A, instead of Model: Toradex UNKNOWN MODULE V1.2A. Signed-off-by:Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by:
Igor Opaniuk <igor.opaniuk@toradex.com>
-
If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by:
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by:
-
Add an optional -y parameter to 'cfgblock create’ to simplify automation. Signed-off-by:
Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by:
Stefan Agner <stefan.agner@toradex.com> Acked-by:
-
Currently, Vybrid's sdboot variable tries to load the kernel from /boot of the root partition (typically second partition when using the sdcard image). However, since we moved to flash the kernel in a separate UBI volume, we no longer deploy the kernel/device tree to /boot, hence sdboot does not work in its current state. Load the kernel and device tree from the first (typically FAT) partition as customary on all Toradex modules. While at it also change from rw to ro as e.g. systemd will re-mount the root file system rw anyway after checking it. Signed-off-by:
Gerard Salvatella <gerard.salvatella@toradex.com> Acked-by:
-
The DDR validation tool (which is part of Processor Expert) allows to evaluate leveling parameters for CR105/CR106/CR110. Several runs have been made with Colibri VF50 and VF61 and it seems to evaluate very similar values. Use this values by default. Note: The newly evaluated parameters seem to require CTLUPD_AREF to be enabled! Note 2: The tool also evaluated 6 as a new value for PHY02/18 GATE_CFG (Coarse adjust of gate open time). However, this seems not to work in practise. Signed-off-by:
-
Using the DDR Validation tool in Processor Expert uncovered two timing inconsistencies. Since those timings are related to the suspend mode they do not affect or change regular memory behaviour. Signed-off-by:
-
Add support for Vybrid's UART2 (Colibri UART_B). Signed-off-by:
-
Use device tree to set MTD partitions of the NAND chip. Signed-off-by:
-
It turns out that OpenSSL calls undefined instructions to detect ARM capabilities at runtime (via SIGILL handler). This leads to stack traces e.g. when logging in using SSH: [ 877.464442] sshd (613): undefined instruction: pc=76ee2da8 ... Disable undefined instruction events since it is used as an autodetecion mechanism. Signed-off-by:
-
Let the kernel print some debug messages when a user program crashes due to an exception. Signed-off-by:
-
Use similar info message as on other modules. Signed-off-by:
-
Set fdtfile to represent the current board. This allows distribution to load the correct device tree, which in the module case often deviates from the common fallback ${soc}-${board}${boardver}.dtb... Signed-off-by: -
Add support for distro boot. This is especially helpful for external devices. There is a global boot command which scans a predefined list of boot targets: run distro_bootcmd As well as direct boot commands such as: run bootcmd_mmc0 run bootcmd_usb run bootcmd_dhcp ... Refer to doc/README.distro fo details. While at it also re-order boot command macros as well as the CONFIG_EXTRA_ENV_SETTINGS. Signed-off-by:
-
Use SZ_X{MK} macros from linux/sizes.h for include/configs/colibri_vf.h. Signed-off-by: -
Migrate FEC, ESDHC, NFC and USB to driver model. While at it also do no longer enable optional I2C clock in board file as the generic clock code now handles this. Note for space reason and as it is not required just for booting we do not enable I2C in U-Boot by default. While at it also update copyright period. Signed-off-by:
-
Migrate pinctrl and regulators to device tree resp. driver model: DDR, DSPI, ENET, ESDHC, I2C, NFC and UART. Enable CMD_DM, PINCTRL and DM_REGULATOR. While at it also update copyright period and sort include files. Signed-off-by:
-
Disable more obscure options to save another 26 KB in preparation of the upcoming driver model migration. Signed-off-by: -
Update device tree in preparation of further driver model migration: Ethernet FEC, ESDHC aka MMC/SD card, I2C, NFC aka NAND flash controller, USBH_PEN GPIO regulator. Add iomux resp. pinctrl entries to be removed from proprietary platform data: DSPI, ESDHC, FEC, I2C, NFC, UART, USBH_PEN GPIO. Introduce a U-Boot specific device tree with some required u-boot,dm-pre-reloc properties: soc, aips0, pinctrl_ddr and uart0 incl. pinctrl. While at it also update the MAINTAINERS file. Signed-off-by: -
While commit 3e020f03 ("driver: misc: add MXC_OCOTP Kconfig entry") introduced a Kconfig entry it did not actually migrate all configurations to using it. As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on those architectures. Additionally, also enable it on ARCH_IMX8M and ARCH_VF610 where all current members enabled it through their legacy configuration header files. Signed-off-by:
Lukasz Majewski <lukma@denx.de>
-
