rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit.

Disable support for Unicode capitalization.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Simon Glass authored 3 years ago and Heinrich Schuchardt committed 3 years ago

Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app
that runs under that. Add a (non-functional) build for this.

Note that --whole-archive causes the gcc 9.2 linker to crash, so disable
this for now. Once this is resolved, things should work.

For now, avoid mentioning the documentation for the 64-bit app, since it
does not work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Simon Glass authored 3 years ago and Heinrich Schuchardt committed 3 years ago

There is no need to avoid driver model for networking. Drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F
   CONFIG_BOARD_LATE_INIT
   CONFIG_DISPLAY_BOARDINFO
   CONFIG_DISPLAY_BOARDINFO_LATE

Signed-off-by: Tom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SPL_DRIVERS_MISC
   CONFIG_SPL_ENV_SUPPORT
   CONFIG_SPL_GPIO
   CONFIG_SPL_I2C
   CONFIG_SPL_LDSCRIPT
   CONFIG_SPL_LIBCOMMON_SUPPORT
   CONFIG_SPL_LIBGENERIC_SUPPORT
   CONFIG_SPL_LOAD_FIT_ADDRESS
   CONFIG_SPL_MMC
   CONFIG_SPL_NAND_SUPPORT
   CONFIG_SPL_NO_CPU_SUPPORT
   CONFIG_SPL_OS_BOOT
   CONFIG_SPL_POWER
   CONFIG_SPL_STACK_R
   CONFIG_SPL_STACK_R_ADDR
   CONFIG_SPL_WATCHDOG
   CONFIG_SPL_TEXT_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BMP_16BPP

Signed-off-by: Tom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_OF_EMBED

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>

This converts the following to Kconfig:
	CONFIG_MCFUART

Signed-off-by: Tom Rini <trini@konsulko.com>

This converts the following to Kconfig:
	CONFIG_FEC_MXC

Signed-off-by: Tom Rini <trini@konsulko.com>

This converts the following to Kconfig:
	CONFIG_SUPPORT_EMMC_BOOT

Signed-off-by: Tom Rini <trini@konsulko.com>

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

Dzmitry Sankouski authored 3 years ago and Tom Rini committed 3 years ago

Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones.
U-boot can be used as chain-loaded bootloader to gain control
on booting vanilla linux(and possibly others) kernels

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>

Dzmitry Sankouski authored 3 years ago and Tom Rini committed 3 years ago

Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone,
for China \ Hong Kong markets.
Has unlockable bootloader, unlike SM-G960U (American market version),
which allows running u-boot as a chain-loaded bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>

Mark Kettenis authored 3 years ago and Tom Rini committed 3 years ago

Add preliminary device trees for the Apple M1 mini (2020) and
Apple M1 Macbook Pro 13" (2020).  Device tree bindings for
the Apple M1 SoC are still being formalized and these device
trees will be synchronized with the Linux kernel as needed.

The device trees in this commit are based on the initial Apple
M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl,
pmgr, usb based on bindings on track for inclusion in Linux
5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and
watchdog that don't have a proposed binding yet.

These device trees are provided as a reference only as U-Boot
uses the device tree passed by the m1n1 bootloader.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

Mark Kettenis authored 3 years ago and Tom Rini committed 3 years ago

Apple M1 SoCs include an S5L UART which is a variant of the S5P
UART.  Add support for this variant and enable it by default
on Apple SoCs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

Mark Kettenis authored 3 years ago and Tom Rini committed 3 years ago

Add support for Apple's M1 SoC that is used in "Apple Silicon"
Macs.  This builds a basic U-Boot that can be used as a payload
for the m1n1 boot loader being developed by the Asahi Linux
project.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add MAINTAINERS entry]

Mark Kettenis authored 3 years ago and Tom Rini committed 3 years ago

Add a set of tests for the IOMMU uclass.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

Now that the three M/N/H variants can be built from one config,
rename the defconfig file to be more generic since it supports multiple
RZ/G2.

Signed-off-by: Adam Ford <aford173@gmail.com>

There are a few do-nothing functions that can be removed.
Remove them.

Signed-off-by: Adam Ford <aford173@gmail.com>

Now that TARGET_BEACON_RZG2M can handle all the work that
was done with TARGET_BEACON_RZG2N and TARGET_BEACON_RZG2H,
remove them since they just create more duplicate code.

Signed-off-by: Adam Ford <aford173@gmail.com>

The three different boards share the same board file and only differ
in terms of which SoC is being used.  By enabling FIT on
TARGET_BEACON_RZG2M, it can support all three boards and elimate
duplicate code.

Signed-off-by: Adam Ford <aford173@gmail.com>

JetHome has own MAC OUI. Add jethub-j100 board file. Update config.

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Ilias Apalodimas authored 3 years ago and Tom Rini committed 3 years ago

OF_HOSTFILE is used on sandbox configs only.  Although it's pretty
unique and not causing any confusions,  we are better of having simpler
config options for the DTB.

So let's replace that with the existing OF_BOARD.  U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

Ye Li authored 3 years ago and Stefano Babic committed 3 years ago

Enable the EQoS i.MX driver in defconfig, also enable the PHYLIB
to facilitate the case that only has FEC enabled.

Signed-off-by: Ye Li <ye.li@nxp.com>

Marek Behún authored 3 years ago and Stefan Roese committed 3 years ago

Move the config option CONFIG_I2C_MV to a Kconfig option
CONFIG_SYS_I2C_MV and move the default definition from config header
files into defconfigs.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>

Marek Behún authored 3 years ago and Stefan Roese committed 3 years ago

Move config options CONFIG_LAST_STAGE_INIT and
CONFIG_DISPLAY_BOARDINFO_LATE to turris_mox_defconfig.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>

mkeficapsule is used to create capsules for UEFI firmware update.
To ease inclusion into U-Boot tools packages of Linux distributions we
should add it to the tools-only_defconfig.

Provide dummy values for CONFIG_AVB_BUF_ADDR, CONFIG_AVB_BUF_SIZE to
satisfy Kconfig.

Suggested-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

Max Krummenacher authored 3 years ago and Stefano Babic committed 3 years ago

Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the
'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used
on other SKUs.

Related-to: ELB-4056, ELB-4057
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Teresa Remmet authored 3 years ago and Stefano Babic committed 3 years ago

Use binman for image creation.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>

Teresa Remmet authored 3 years ago and Stefano Babic committed 3 years ago

Enable clk command to dump clock tree.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>

Teresa Remmet authored 3 years ago and Stefano Babic committed 3 years ago

Adds SPI-NOR flash support to erase, read and write in bootloader.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>

Igor Opaniuk authored 3 years ago and Stefano Babic committed 3 years ago

Enable and set preboot var with fdtfile evaluation.
It will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

Max Krummenacher authored 3 years ago and Stefano Babic committed 3 years ago

This powers some peripherals on the carrier board e.g. the USB hub.

Related-to: ELB-3206
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

Marcel Ziswiler authored 3 years ago and Stefano Babic committed 3 years ago

Use binman to pack images.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Due to missing configs, CI goes in deadlock until an OOM is tracked. Add
CONFIG_SYS_LOAD_ADDR and replace CONFIG_SYS_EXTRA_OPTIONS with
CONFIG_IMX_CONFIG.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
CC: Fabio Estevam <festevam@denx.de>

Even if board can be successfuly built, CI goes in deadlock (see thread
on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html

).
This is caused by SYS_CONFIG set in header file and because defconfig
for the board is out of sync with Kconfig. As result, buildman goes on
to read from stdin until an OOM is reached.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Frieder Schrempf <frieder.schrempf@kontron.de>

Amjad Ouled-Ameur authored 3 years ago and Tom Rini committed 3 years ago

This enables the clock controller driver support on TI's SoCs. This will
fix this GPIO issue at boot time:
request_and_set_gpio: Unable to request GPIO_PR1_MII_CTRL
request_and_set_gpio: Unable to request GPIO_MUX_MII_CTRL
request_and_set_gpio: Unable to request GPIO_FET_SWITCH_CTRL
request_and_set_gpio: Unable to request GPIO_PHY_RESET

This issue comes from the fact that the clock controller is not probed.

Enable the TI's clock controller driver support to solve this.

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>

Marek Vasut authored 3 years ago and Stefano Babic committed 3 years ago

Build U-Boot in Thumb2 mode for M53Menlo board, this makes better
use of the CPU since the instruction density is higher.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

Marek Vasut authored 3 years ago and Stefano Babic committed 3 years ago

The board can do primary/secondary boot switching, enable the bmode command.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>