board: tegra30: switch to button cmd

Use recently added ability to assign commands to buttons via env.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

configs/endeavoru_defconfig

@@ -14,12 +14,13 @@ CONFIG_TEGRA30=y
 CONFIG_TARGET_ENDEAVORU=y
 CONFIG_CMD_EBTUPDATE=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
+CONFIG_BOOTCOMMAND="bootflow scan; poweroff"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000

configs/grouper_common_defconfig

@@ -14,12 +14,13 @@ CONFIG_TEGRA30=y
 CONFIG_TARGET_GROUPER=y
 CONFIG_CMD_EBTUPDATE=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
+CONFIG_BOOTCOMMAND="bootflow scan; poweroff"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000

configs/transformer_t30_defconfig

@@ -14,12 +14,13 @@ CONFIG_TEGRA30=y
 CONFIG_TARGET_TRANSFORMER_T30=y
 CONFIG_CMD_EBTUPDATE=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff; fi"
+CONFIG_BOOTCOMMAND="setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000

configs/x3_t30_defconfig

@@ -15,12 +15,13 @@ CONFIG_TARGET_X3_T30=y
 CONFIG_TEGRA_ENABLE_UARTD=y
 CONFIG_CMD_EBTUPDATE=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
+CONFIG_BOOTCOMMAND="bootflow scan; poweroff"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000

include/configs/endeavoru.h

@@ -53,7 +53,8 @@
 	"boot_block_size_r=0x200000\0" \
 	"boot_block_size=0x1000\0" \
 	"bootloader_file=u-boot-dtb-tegra.bin\0" \
-	"check_button=gpio input 179; test $? -eq 0\0" \
+	"button_cmd_0_name=Volume Down\0" \
+	"button_cmd_0=bootmenu\0" \
 	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
 	ENDEAVORU_BOOTMENU
 

include/configs/grouper.h

@@ -49,7 +49,10 @@
 	"boot_block_size_r=0x200000\0" \
 	"boot_block_size=0x1000\0" \
 	"bootloader_file=u-boot-dtb-tegra.bin\0" \
-	"check_button=gpio input 131; test $? -eq 0;\0" \
+	"button_cmd_0_name=Volume Down\0" \
+	"button_cmd_0=bootmenu\0" \
+	"button_cmd_1_name=Lid\0" \
+	"button_cmd_1=poweroff\0" \
 	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
 	GROUPER_BOOTMENU
 

include/configs/transformer-common.h

@@ -71,18 +71,20 @@
 	"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
 	"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
 	"bootmenu_3=update bootloader=run flash_uboot\0" \
-	"bootmenu_4=enter console=usb start; setenv skip_boot 1; exit\0" \
-	"bootmenu_5=reboot RCM=enterrcm\0" \
-	"bootmenu_6=reboot=reset\0" \
-	"bootmenu_7=power off=poweroff\0" \
+	"bootmenu_4=reboot RCM=enterrcm\0" \
+	"bootmenu_5=reboot=reset\0" \
+	"bootmenu_6=power off=poweroff\0" \
 	"bootmenu_delay=-1\0"
 
 #define BOARD_EXTRA_ENV_SETTINGS \
 	"spi_size=0x400000\0" \
 	"boot_block_size_r=0x200000\0" \
 	"boot_block_size=0x1000\0" \
-	"check_button=gpio input ${gpio_button}; test $? -eq 0;\0" \
 	"bootloader_file=u-boot-dtb-tegra.bin\0" \
+	"button_cmd_0_name=Volume Down\0" \
+	"button_cmd_0=bootmenu\0" \
+	"button_cmd_1_name=Lid sensor\0" \
+	"button_cmd_1=poweroff\0" \
 	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
 	TRANSFORMER_BOOTMENU
 

include/configs/x3-t30.h

@@ -54,7 +54,8 @@
 	"boot_block_size_r=0x200000\0" \
 	"boot_block_size=0x1000\0" \
 	"bootloader_file=u-boot-dtb-tegra.bin\0" \
-	"check_button=gpio input 116; test $? -eq 0\0" \
+	"button_cmd_0_name=Volume Down\0" \
+	"button_cmd_0=bootmenu\0" \
 	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
 	X3_BOOTMENU