- Oct 23, 2020
-
-
The "cmd/Kconfig" has a TODO description for CMD_MISC that it should really be named as CMD_SLEEP. Change it in the whole source tree. Signed-off-by:Bin Meng <bin.meng@windriver.com>
-
This change fixes two issues when building u-boot-nodtb.bin target: * Remove intermediate binary u-boot-nodtb.bin from disk when static_rela call (which modifies u-boot-nodtb.bin binary) failed. It is required because previous objcopy call creates binary and static_rela finish it. * Do not call static_rela cmd when u-boot-nodtb.bin binary was not created/updated by previous objcopy call. Second fix would ensure that u-boot-nodtb.bin binary is not updated when all prerequisites were up-to-date. And therefore final binary u-boot.bin is not updated in case all prerequisites were not modified and were up-to-date. Now running 'make SOURCE_DATE_EPOCH=0 u-boot.bin' second time now does not touch u-boot.bin binary in case nothing was modified, so GNU make can correctly detect that everything is up-to-date. Signed-off-by:
Pali Rohár <pali@kernel.org> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by:
Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by:
Heiko Schocher <hs@denx.de>
-
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by:
-
Update the size of states_array to avoid overflow for dev_pdata->voltages[j] and dev_pdata->states[j]. As the size of array is GPIO_REGULATOR_MAX_STATES, the size of states_array is limited by GPIO_REGULATOR_MAX_STATES * 2 = 4 instead of 8 previously. The value of the "count" variable is limited by the third parameter of fdtdec_get_int_array_count. Signed-off-by:
-
(A && A == 0x20) is only true for (A == 0x20). Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by:
-
-
Tom Rini authored
I had inadvertently merged the Xen series before everything was fully happy with the board maintainer. Revert the series.
-
Tom Rini authored
This reverts commit 18426bf0. Signed-off-by:
Tom Rini <trini@konsulko.com>
-
Tom Rini authored
This reverts commit 3a51b2a2. Signed-off-by:
-
Tom Rini authored
This reverts commit 16389a74. Signed-off-by:
-
Tom Rini authored
This reverts commit 82e21b39. Signed-off-by:
-
https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini authored
- sun8i emac changes (Andre) - SCP firmware (Samuel)
-
- Oct 22, 2020
-
-
Tom Rini authored
- Assorted updates for Xen, IPQ40xx, ASpeed, Keymile - Assorted typo / documentation fixes - Fix default preboot cmd to act like before with USB_STORAGE set - A number of other bugfixes throughout the code
-
add Kconfig option for pcf8563 driver and run tools/moveconfig.py Signed-off-by:
Stefan Roese <sr@denx.de>
-
dev_err has been used for debugging and a few dev_err message are printed for normal code execution. Make them dev_dbg instead. Signed-off-by:
Fabien Parent <fparent@baylibre.com> Reviewed-by:
Peng Fan <peng.fan@nxp.com>
-
By using a hypervisor call, we can implement DEBUG_UART on xen. This will allow us to see messages even earlier than serial_init(). Signed-off-by:AKASHI Takahiro <takahiro.akashi@linaro.org>
-
Those definitions added are used with HYPERVISOR_console_io(). Signed-off-by:
-
This new function, xen_debug_putc(), is intended to be used to enable CONFIG_DEBUG_UART on xen guest. Please note that the underlying functionality in Xen is available only when Xen is configured with !NDEBUG but is much simpler than a generic HYPERVISOR_console_io(). Signed-off-by:
-
At present, DM_FLAG_PRE_RELOC is set only if !OF_CONTROL. It doesn't make sense for this para-virtualized driver. With this patch applied, you will be able to see early boot messages: U-Boot 2020.10-00001-ge442e71a6c52-dirty (Oct 15 2020 - 11:02:25 +0900) xenguest Xen virtual CPU Model: XENVM-4.15 DRAM: 128 MiB PVBLOCK: (XEN) gnttab_mark_dirty not implemented yet pvblock: 0 In: hypervisor Out: hypervisor Err: hypervisor xenguest# Signed-off-by:
-
1. Rename AST2500 reset driver from ast2500-reset.c to reset-ast2500.c 2. Rename AST2500 reset kconfig option from AST2500_RESET to RESET_AST2500 Signed-off-by:
Chia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by:
Ryan Chen <ryan_chen@aspeedtech.com>
-
The System Control Unit (SCU) controller of Aspeed SoCs provides the reset control for each peripheral. This patch refactors the reset method to leverage the SCU reset control. Thus the driver dependency on watchdog including dedicated WDT API and reset flag encoding can be eliminated. The Kconfig description is also updated accordingly. Signed-off-by:
-
The 12d15262 commit fixed the get_rate helper because the set_parent one did not re-parent the clock device to the new parent. The 4d139f38 commit allows you to remove this workaround by calling the clk_get_parent_rate routine. Signed-off-by:
Dario Binacchi <dariobin@libero.it>
-
Fix "ram" typos for serial flash Signed-off-by:Chance.Yang <chance.yang@vatics.com>
-
Fix up the documentation which was lost in a merge conflict in the conversion to RST. Fixes: 52d3df7f ("log: Allow LOG_DEBUG to always enable log output") Signed-off-by:
-
%s/occured/occurred/ Signed-off-by:
Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by:
-
%s/occured/occurred/ Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Qu Wenruo <wqu@suse.com>
-
%s/occured/occurred/ Signed-off-by: -
Remove the default value "usb start" for CONFIG_USB_STORAGE as the USB storage boot initialization is correctly managed by distro boot command ('usb_boot' defined in include/config_distro_bootcmd.h already include the command 'usb start'). Fixes: 324d7799 ("Define default CONFIG_PREBOOT with right config option") Signed-off-by: -
Replace 'dev->dev' with '@desc->dev' in the gpio_request_by_name function desc parameter description. Signed-off-by:
-
Complete the devp parameter description. Signed-off-by:
-
Instead having a hard coded value for "cramfsaddr" after compile time, we change it to take the variable "cramfsaddr" for the ubicopy variable. This makes sure that ubicopy uses the right address, even when the value for "cramfsaddr" has changed. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by:
Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by:
-
Due to increasing kernel image sizes we get problems when decompressing the kernel image. To fix this we need to change the addresses where we load and where we extract the kernel. Also we need to adapt the address where to load the CRAMFS image and where to load the DTB file. While at it also harmonize all boards for PPC and ARM to have the same values. Also we add a new variable "env_version", so that the userspace is able to detect if this is a u-boot binary with updated values or not. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by:
-
In the International System of Units (SI) the prefix kilo is abbreviated as 'k' not 'K'. 'K' is the symbol for Kelvin. Signed-off-by:
-
Since we now have the driver for Qualcomm PRNG HW, lets use it and add the necessary clocks and nodes. Signed-off-by:Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
Add support for the hardware pseudo random number generator found in Qualcomm SoC-s. Signed-off-by: -
Lets add the necessary DTS node and pinctrl properties for newly added MDIO driver. Signed-off-by: -
This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: -
Since we have SPI driver for IPQ40xx QUP SPI controller, lets add the necessary nodes, pinctrl and clocks. Signed-off-by: -
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s. Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW. FIFO and Block modes are supported, no support for DMA mode is planned. Signed-off-by:
Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
